MTDE Amazonia 2 Caving harness
- MTDE Amazonia 2 Caving harness
- Very hard wearing webbing protected by removable PVC reinforcements.
- The Amazonia harness has a very low attachment point.
- 4 strong gear loops in Dyneema/Polyamide mix
- Waist Band is adjustable 44 mm webbing.
- Thighs and seat strap: adjustable support 28mm
- Colours: black / blue.
- One size fits all. (most)
- Maximum waist circumference: 112 cm.
- Weight: 596 g.
- CE 0082 EN12277 Type C
- Add a central D https://accessgear.net/products-page/carabiners-and-maillon-rapides/carabiner-triad-3lock/
- Full review here https://www.youtube.com/watch?v=SR4w72Fm1Xg
- Contact pete@accessgear.net for info.
MTDE Amazonia 2 Caving harness
Likely the most popular caving harness out there for good reason.
Super hard wearing with a very low attachment point for efficient ascending.
The added butt strap makes for more comfort whist ascending.
Middleweight, comfortable and very effective sit harness.
Solid 26mm tape on bumstrap and leg loops (all fully adjustable) gives surprisingly good support- although initially it can feel rather odd! Low central attachment point aids efficient prussiking. Four tape gear loops (two each side), the Amazonia integrates with the Garma chest harness to make an effective set up for rigging, climbing, and general SRT intensive trips.A very nice harness for those wanting a bit more support on rope.
Likely the most popular caving harness out there for good reason. Super hard wearing with a very low attachment point for efficient ascending. The added butt strap makes for more comfort whist ascending. Middleweight, comfortable and very effective sit harness. Solid 26mm tape on bumstrap and leg loops (all fully adjustable) gives surprisingly good support- although initially it can feel rather odd! Low central attachment point aids efficient prussiking. Four tape gear loops (two each side), the Amazonia integrates with the Garma chest harness to make an effective set up for rigging, climbing, and general SRT intensive trips.A very nice harness for those wanting a bit more support on rope. Possibly the best suited for narrow and gnarly caves, because it is quite low profile and tends to sit in place when worn, so it is less likely to catch up on projections. Solid 26mm tape on bumstrap and leg loops (all fully adjustable) gives surprisingly good support- although initially it can feel rather odd! Low central attachment point aids efficient prussiking. Four tape gear loops (two each side), the Amazonia integrates with the Garma chest harness to make an effective set up for rigging, climbing, and general SRT intensive trips. A very nice harness for those wanting a bit more support on rope.
MTDE Club harness
- MTDE Club harness
- A certified harness – CE 0082 EN12277 Type C
- A simple, very strong harness made for caving.
- Incredibly well made.
- Waist-belt and leg loops made from 44-mm webbing.
- Totally adjustable.
- 2 strong equipment loops, one on either side.
- Weight: 320 g. Lightweight
- One size fits all – Maximum waistbelt size 112 cm.
- Perfect for beginners or a great lightweight option for experts in gnarly caves!
- Add a central D https://accessgear.net/products-page/karabiners-and-maillon-rapides/triad-3lock-camp/
- For more info contact pete@accessgear.net
- Some more info here – https://www.youtube.com/watch?v=SR4w72Fm1Xg
A strong sit harness for caving. Fully adjustable leg loops and belt. Surprisingly comfortable 🙂 Created for club / outdoor centre use, but also well suited for narrow and arduous caves, or those where horizontal passage predominates. 44mm webbing throughout, with two gear loops, one each side. One size fits all, and it the upper range is good for around 40″ waist. Very convenient for group use. Competitive price for a harness which is very solidly put together from excellent materials – as with all MTDE kit!
Caving Overalls
- Caving Overalls
- Made buy AV-Adenture Verticale
- A great fitting quality caving suit
- Elasticated waist band
- Fleece lined collar for comfort.
- Knees and buttocks reinforcements.
- Velcro closure at wrist and body.
- Chest pockets x 2
- Sizes – Please contact for availability of S/M/L/XL/XXL
- Colour Red/Black
- Genuine Cordura material
- Light in weight but strong in use
- weight – 965 g (in M size)
- Contact pete@accessgear.net
A well thought out comfortable caving suit. These suits fit extremely well as a rule do ask if you have doubts. Made from genuine cordura fabric with added knee and bum protection they last well considering the abuse that is thrown at them whilst caving. These cave suits are made in France by Adventure Verticale or AV as they are known.
MTDE Varonia harness
- MTDE Varonia harness
- A very hard wearing caving harness with webbing protected by removable PVC reinforcements.
- This harness has a very low attachment point.
- 4 strong gear loops in Dyneema/Polyamide mix
- Waist Band is adjustable 44 mm webbing.
- Thighs and seat strap adjustable 44mm and 26mm webbing
- Colours: black / blue.
- One size fits all. (most)
- Maximum waist circumference: 112 cm.
- Weight:610g.
- Amazing quality.
- CE 0082 EN12277 Type C
- Add a central D https://accessgear.net/products-page/karabiners-and-maillon-rapides/triad-3lock-camp/
- Full review here https://www.youtube.com/watch?v=SR4w72Fm1Xg
- Contact pete@accessgear.net for info.
The intermediary MTDE caving harness. Like the Amazonia the Varonia has a low attachment point. The extra bum strap spreads the load whist ascending and is movable when walking in horizontal passages. Belt and buttocks strap adjustable, support 44 mm. Thighs: adjustable, supports 26 mm. Gear loops in Dyneema: 3 fixed (in webbing with safety seams: 2 per side). Protections: removable PVC, webbing protection thigh and buttocks. Color: blue / black. Size. Max belt circumference: 112 cm. Weight: 620 g.
Kordas Stark 10.5mm
- Kordas Stark 10.5mm
Semi-static featured rope for all kinds of professional uses. Made with a high quality sheath for good progression and durability. SEMI-STATIC EN1891:1998
- Diameter 10,5mm
- Weight per meter 71g
- Core percentage57%
- Sheath percentage43%
- Sheath slippage0%
- Elongation3,6%
- Static resistance 3000daN
- White available
- Contact pete@accessgear.net
- SOLD OUT
Stark 10,5 EN1891, type A Semi-static featured rope for all kinds of professional uses. Made with a high quality sheath for good progression and durability. Its excellent properties, its malleability and versatility, as well as value for money make it the preferred choice for rope access professionals. It includes the Shrinkles finnish, and then it is unnecessary to soak before use and reduces the natural shrinking process.
Titanium crow bar
- Titanium crow bar
- This is an individually made bespoke Titanium hand tool – Made in New Zealand!
- Fossicking – for gold, moving rocks or digging in remote locations.
- Diving – fresh water or salt water.
- Work – remote difficult locations.
- Caving – Leverage where you need it in tight places.
- Climbing – Move dangerous loose boulders and rocks whilst cleaning new routes.
- Thickness 20mm, Length, 630m, Full length of bar – 720mm
- Weight comparison Titanium 976 Grams Steel. 1679 Grams 42% lighter than Steel.
Titanium crow bar – This wonderful material is individually crafted into a quality tool. First forged locally, with the ends bent at 90 degrees and 15 degrees respectively, then ground, and finally polished by hand. All here in New Zealand.
No rust or corrosion, even in sea water. Made from solid Titanium, stronger than steel. (highest strength to weight ratio of any metal)
Hypoallergenic 🙂
Non magnetic!
Highly resistant to acids
Flyer here Titanium Crow Bar Add – updated 29_3_23 In Stock now. Contact pete@accessgear.net or call +6421 1674675
Titanium Crow bar. Titanium – This wonderful material is individually crafted into a quality tool. First forged locally, with the ends bent at 90 degrees and 15 degrees respectively, then ground, and finally polished by hand. All here in New Zealand. No rust or corrosion, even in sea water. Made from solid Titanium, stronger than steel. (highest strength to weight ratio of any metal) Hypoallergenic 🙂 Non magnetic! Highly resistant to acids.
Dyneema Cord 5mm (copy)
- Sheath and core DB-UHMWPE Beal Dyneema Copy
- An alternative to the Beal Pure Dyneema cord
- Pull tested in a loop to 15kN
- Make your own footloops
- V threads – Use a double or triple fishermans to secure this very slippery cord!!
A copy of Beals Dyneema cord made with Sheath and core DB-UHMWPE
SMC APEX Swivel Pulley
- SMC APEX Swivel Pulley
- Model #: NFPA165120
- Very high quality
- Material: Aluminum, Stainless Steel
- Finish: Anodized, Blue/Grey
- Dimensions: 5.9” x 2.9”
- Weight: 10.8oz (306g)
- MBS: 38kN
- WLL: 9.5kN
- Certification: NFPA
- Rope size: up to 13mm
- Sheave Major Diameter: 2.0” Tread Diameter: 1.5”
- Questions – pete@accessgear.net
- https://www.youtube.com/watch?v=4CIWbLQ8Nu8
- With a patented, low-profile, triple-action lock which prevents accidental opening. This intuitive and ergonomic design can be opened with one hand. A robust lock that is operated by three distinct actions:
- Pivot the lock, depress the lock, and swing the side-plate. Simply closing the side-plate re-engages the lock and secures the rope.
SMC combined 54 years of design and manufacturing knowledge with an uncompromising program of innovation, prototyping and user feedback to create our new Apex Swivel Pulley. The result is a pulley with unmatched security and deceptively simple ease of use. A patented, low-profile, triple-action lock prevents accidental openings, but the intuitive and ergonomic design can be opened with one hand. The robust lock is operated by three distinct actions: pivot the lock, depress the lock, and swing the side-plate. Simply closing the side-plate re-engages the lock and secures the rope. With symmetrical side-plates for optimized use with prusik-based progress capture systems this will minimize the possibility of mis-rigging. When unlocked, the side-plates swing away to streamline setup and offer maximum versatility when placing the pulley anywhere in your system. The cold-forged, custom designed swivel eye accommodates up to three carabiners and the rounded profile offers excellent soft goods compatibility when you want to eliminate the carabiner altogether. The APEX is best-in-class when you need a robust, versatile, and American-made pulley that is perfect for use in rescue, rope access, or arborism.
Carabiner Triad 3LOCK (Camp) Semi-circular
A brilliant product for 3 way loaded connection points ie harnesses. Semi-circular aluminum alloy carabiner with a 16 kN breaking load in all directions. It has an exceptional strength of 25 kN when loaded on three points so it is perfect for the connection of fall-arrest devices to the “A/2” double sternal attachment points of some full body harnesses. Keylock closure prevents snagging during use. Automatic lock requires three actions to open: slide, twist and pull.
AV Mazerin Harness
- AV Mazerin Harness
- Canyoning and Caving harness
- Designed for the canyons of La Reunion island
- For easier PPE monitoring, each personal protective equipment has an individual number on the year of manfacture label.
- Individually numbered harness with a honest certification CE, EN 12277+A1 :2018 TypeC https://www.aventureverticale.com/en/canyoning/sit-harness-avca04.html
- Extremely good seated position very comfortable harness
- Made for vertical Canyoning/Caving
- low attachment point because ascending is way easier (when needed)
- Add D shape triple locking carabiner https://accessgear.net/products-page/carabiners-and-maillon-rapides/carabiner-triad-3lock/
- Comes with bum protector included!
- Comfort belt is an extra for those that need a little more.
- Sizes available please ask! pete@accessgear.net
- AV Mazerin Harness sizing –
- XS-M: maxi waist 95 cm (yellow attachment point)
ML: maximum waist circumference 115 cm, (blue attachment point)
XL: maximum waist circumference 135 cm (purple attachment point) - Monitor harness with a pants-shaped protection, an integrated knife-holder and a tie designed especially for bags. Efficient for both canyoning and caving.Designed according to the size and vertical height of the steep canyons on the Island of Reunion but also to meet the requirements and needs related to daily supervision, the Mazerin has been created for professionals who often use the rope climbing up system.Like a seat harness, the pant-shaped protection helps you to remain in a well-seated position while suspended in the air for long periods of time.The mobile leg loops that maintain the butt support strap in place are quick to take on and off, and relieve the groin from friction during approaches, exits, or transitions.Tried and tested over many years and on several expeditions, this monitor sit-harness, with its strap to hold knives, its strap provided especially for bags, has proven its ability to perform for both canyoning and caving.
After trying this AV Mazerin harness on, I realised how I have been wearing an uncomfortable harness for many years! A must for canyoning.
Camp Turbolock
- Camp Turbolock is a progress capture pulley designed to be exceptionally compact robust and efficient.
- Very high efficiency pulley (95%).
- Inner sheave diameter mm 41
- Rope diameter Min mm 8
- Rope diameter Max mm 13
- Working load Max 2,5 kN x 2 = 5 kN
- Breaking load kN 23
- Sheave material Aluminum alloy
- CE EN12278 – CE EN567 – CE EN12841/B
- https://www.youtube.com/watch?v=_YXKo1u_12s
Designed for operation with one hand. A cleverly designed locking mechanism allows the rope to be inserted without removing the device from the anchor, it cannot be opened when the pulley is loaded. A toothed cam is designed for an immediate and strong grab on ropes from 8 to 13 mm.
This cam is enabled and disabled with a protected switch inside the flanges to prevent accidental opening. One movement to open the cam for easier insertion or removal of the rope. Or use the device as a non-locking simple pulley. Two movements to enable the cam.
The two attachment points (main attachment point and the becket hole) allowing for rotation of carabiners for ease of use.
Large diameter sheave with sealed ball bearings – very high efficiency (95%).
Robust construction features hot forged side plates, precision milled aluminum alloy sheave, and stainless steel cam, rivets and pins.
Petzl Pirana Guide
- Petzl Pirana Guide
- The Petzl Pirana guide is an adjustable friction descender with spur and locking loop for canyoning intended for independent users and guides. It has three rope installation options and allows the degree of friction to be adjusted before starting the descent. A friction spur allows for increased braking power during the descent. The plastic ring keeps the connector in the correct position to facilitate rope installation while the device is attached to the harness, limiting the risk of the device falling.
- Material(s): Aluminum frame, thermoplastic elastomer (TPE) positioning ring
Weight: 110 g
Rope compatibility: 8 to 13 mm - Contact – pete@accessgear.net
Turbofoot foot ascender (Camp)
- Right Foot ascender
- Max 150kg
- Smooth ascending using Camps unique patented rollers
- 8 to 13 mm rope
- Contact pete@acessgear.net
Hook these mini ascenders to your feet and climb lines with greater ease than you ever imagined! Proprietary rollers are positioned where the rope tends to rub on the body of a traditional ascender to ensure smoother action and a longer product life for both the ascender and the rope. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build up of mud and grit. The innovative strap design provides a secure fit to any kind of boots or shoes and aligns the straps with the direction of the forces being applied for optimal comfort and efficiency. The proprietary rollers also allow the Turbofoot to be rigged as a locking pulley for light hauling with a max load of 50 kg, 110 lbs. (NOTE: This configuration is not intended for hauling or securing of bodies). For semi-static and dynamic ropes ranging from 8 to 13 mm.
Bear Claw lanyard
- Bear Claw lanyard – very strong
- 40+kgs B/L
- Yellow, Green, or Orange
- Use it on the Axe aventures knife https://accessgear.net/products-page/all-products/bear-claw-alternative-axe-aventures-knife/
A quality lanyard
Bear Claw (alternative) Axe Aventures knife
- Bear Claw (alternative) Axe Aventures knife
- Stainless Steel SS 420
- A solid emergency knife option for canyoning
- Similar to the CRKT Bear Claw. Made by French company Axe Aventures
- Almost identical in size.
- Comes in its own box including 2 x zip ties and silicon grease.
- Buy a strong lanyard here – 40kgs breaking is a lot! https://accessgear.net/products-page/all-products/bear-claw-lanyard/
- Or make your own lanyard…..
Caving Pack (Small) Access Gear
- Caving Pack (Small) Access Gear
- Thick PVC ripstop
- very hardwearing – the thickest PVC available
- Quality internal loops for tying off rope
- Eyelets in bottom (Ask if you do not want them)
- 500mm(h) x 400mm(w), 28 litres approx
- Strong hanging loops
- Side handle
- Shoulder handle.
- Base handle
- Better cord lock
- Base made from extremely durable material, better than ever!
- Many colours to choose from, please ask for possibilities.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
UPDATED Jan 2021 to a more robust ergonomic design! Extremely well made. With a better well thought out ergonomic design. We think through the design whilst in using these in caves. Lots of colours and options please do ask.
Camp 8.5 mm Express Dyneema Runner
- Camp 8.5 MM EXPRESS DYNEEMA RUNNER 60 CM
- Camp Brand
- Sewn rings of 8.5 mm Dyneema® webbing available in 2 lengths 60, 120
- Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
- Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm
- The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.
- Contact pete@accessgear.net for more info
MTDE Garma Chest Harness
MTDE Garma Chest Harness:
MTDE set out to make one of the best chest harnesses on the market. Short story: they succeeded. The Garma has the same amazing stitching exemplified on their world class sit harnesses. This chest harness is geared towards aid climbs and extremely vertical caves; however, it also tackles the basic needs of a SRT chest harness with ease. This harness is intended to be singularly connected to the ventral attachment point on a standard SRT seat harness.
*Not PPE. Compulsory use with caving sit-harness.
Looking for a more economical option? Check out AV’s Spelshoulder Pro Chest Harness.
Review here https://www.youtube.com/watch?v=SR4w72Fm1Xg&t=3s
Contact pete@accessgear.net
Camp 8.5 MM EXPRESS DYNEEMA RUNNER 120 CM
- Camp 8.5 MM EXPRESS DYNEEMA RUNNER 120 CM
- Camp Brand
- Batch numbered
- Serial numbered
- Sewn rings of 8.5 mm Dyneema® webbing available in 2 lengths 60, 120
- Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
- Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm has many uses. Temporary lanyard, Anchor,Extended Draw, Footloop in ascending etc……
- The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.
- Certified EN566:2017 ( Be aware some state ‘complies with the certification’ but actually is not certified)
- Contact pete@accessgear.net for more info
AV Spelshoulder PRO
- AV Spelshoulder PRO
- Chest harness for caving.
- 38mm comfortable chest straps.
- Adjustable by a double loop.
- Preferred by Women – this model compared to the simple version AVSP12 because it can be positioned higher.
- Not PPE. Compulsory use with caving sit-harness
- 185 g
- Contact pete@accessgear.net
3Ltr pod bag
- 3 Ltr Pod Bag
- The original bag Since 2010 (Copied, but never bettered)
- Now also available with a Bit of pipe for stiffening the top! (See pictures of colour options)
- 3 great options – 1 Solid base 2. Mesh base 3. With pipe for stiffening top.
- Access Gear quality
- Great for industrial abseilers
- Two hanging loops
- Very tough
- 3 ltrs approx
-
Available with mesh on the bottom for drainage, Since 2013, our idea 😉
- Made in New Zealand
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Rope Rescue & Rigging (Field Guide)
- Rope Rescue & Rigging (Field Guide)
- Written and illustrated by Grant Prattley
- A6 sized 105 x 148mm
- Waterproof paper
- 204 pages in full colour
- 250+ drawings
- Published in 2020
NEW and updated
- Most drawings have been improved or redrawn;
- Personal skills – harness setup for canyon and alpine/rock, edge kit
- Knotcraft – doubled overhand bend, double sheet bend, 6on1 Schwabisch (asymmetric)
- Communication – counterbalance voice commands, knot ID for rope ends
- Anchors – Natural anchors, rock protection, human anchors
- Lowering – two rope systems, figure-8 device, Scarab, belay device
- Pulleys – two rope systems, counterbalance, pulley system – more complex progressions
- Changing systems – new section – changeovers, passing bends, swapping systems, passing directionals
- Load – canyon rescue stretcher
- Aide memoir – as we use the book for training, at the back is a summarised comms section is in an easy to find location.
- What’s been taken out: A new focus for the field guide. It’s for backcountry rescue where you expect to carry the gear some distance. So anything particularly heavy and things we don’t normally carry has been taken out. That means no 11mm ropes, SA frames, tripods, IDs and industrial harness setup.
The 3rd edition orf the Rope Rescue & Rigging field guide written by Grant Prattley. All on waterproof paper!
CRKT Bear Claw
- CRKT Bear Claw™
- Orange colour for visibility
- Ultimate Durability: AUS 8 is corrosion resistant
- Extremely Sharp: Veff Serrations™ provide superior cutting power of rope and straps
- Strong and Lightweight: Glass-reinforced nylon handle is durable and lightweight
- Exceptional Grip: Textured handle provides grip in wet conditions
- Gear Compatible: Durable glass-reinforced nylon sheath with mounting options
- https://www.youtube.com/watch?v=-jnZUTVflp8
-
MEASUREMENTS
Blade Length 2.39″ (60.58 mm)
Blade Thickness 0.13″ (3.40 mm)
Overall Length 5.69″ (144.48 mm)
Weight 3.20 oz. (90.72 g)
Iguazu Wetsuit (Seland brand)
- Iguazu Wetsuit (Seland brand)
- Double lined 6/5/4 mm Canyoning Steamer. With hood and Warm Plush in most of the suit, which makes it a very warm suit.
• Chest and back in 6 mm; abdomen, thighs and lumbars in 5 mm and 4 mm in the
extremities.
• Very warm suit with Warm Plush on fabric trunk, thighs and hood.
• Seams protected on the outside and sealed on the inside.
• Ultrastretch neoprene on shoulders, head and extremities.
• Small Diamond additional reinforcement (high resistance material against abrasion)
on hip pad,elbow and knees.
• RUBBER FLEX 06 reinforcement on hip pad, elbow and knees.
• Adjustable hood to the face with rubber inside and Warm Plush inside.
• Frontal closing system with YKK zipper.
• Front pocket to keep camera and additional pocket with cord to keep the whistle (not
included).• Water drainage holes (on back and front pocket).
COLOUR: Red and black. - Available sizing now M, L, LT,
Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
For more info or advanced orders – Contact pete@accessgear.net
A super warm canyon specific wetsuit made for adventure.
Vertical Evolution 10mm Canyoning hanger
- Vertical Evolution – 10mm Canyoning hanger
- CERTIFIED EN 959
- Radial 32kN
- Axial 22kN
- Light weight! 65gr
- Stainless steel AISI 316L
- Can effectively be used with concrete screws
- Tie directly into the hanger
- perfect for expedition rigging in caves or canyons
- Pulldown the rope easily whist canyoning.
- Rescue opps as part of a 3 point anchor system.
Vertical Evolution – 10mm Canyoning hanger is the simple quality all round answer for your rigging in caves and canyons.
Fenix Headlamp HM70R
- Fenix Headlamp HM70R
- 1600 lumens maximum output; 100 hours ultra-long maximum runtime.
- A Luminus SST40 white light LED, an XP-G2 HE neutral white
LED and two 2835 red light LEDs. - Included a 21700 Li-ion battery, a 18650 Li-ion battery can be used
as well (together with an ALF-18 battery holder). - White, neutral white and red lights combined.
- Toughened ultra-clear glass lens with an anti-reflective coating.
- Hidden USB Type-C charging port supports 2A charging current.
- Large thumb-sized switch for easy and fast operation.
- Digitally regulated circuit for maintaining a stable output.
FENIX-HM70R TRIPLE LIGHT SOURCE RECHARGEABLE 21700-POWERED HEADLAMP. The Fenix HM70R is an all-metal headlamp that provides long-distance and wide-range lighting, with a maximum brightness of 1600 lumens and a maximum runtime of up to 100 hours. This versatile headlamp is fitted with red and white light sources plus a red flash mode for alerting purposes. Powered by a powerful 21700 battery and it is compatible with a 18650 battery (with an ALF-18 battery holder) as well. It is rechargeable with a hidden USB Type-C charging port for go-anywhere charging. Featuring a large-sized switch, impact resistant to 2 meters, it can be your trustworthy lighting tool for high-intensity outdoor work and it is ready to travel with you to a variety of challenging activities.
MTDE Speleo Poncho
MTDE Speleo Poncho
This MTDE Speleo Poncho is Very Lightweight, and compact, reusable survival garment, whose key advantage over the survival bag or group shelter is that multiples can be combined to make larger single shelters.
This is achieved by intelligent design and placement of Velcro patches. it works as a poncho, as a cape, or as a ‘want to get away from it all’ shelter, as shown!
The advantage of a team using these items is that an individual stranded has enough space for themselves, without carrying extra bulk or having a shelter too big for one person to warm effectively. However, if a team is immobilised then a big-enough single shelter can also be created. The fact that different numbers of these ponchos can be combined to create a different size of shelter also increases the systems flexibility, helpful in coping with limited or oddly-shaped bivouac space.
For this reason they are also a useful component in emergency grab-bags, although their greatest benefit arises if they are carried as standard by individual.
HMS 3Lock (Camp)Carabiner
- Standard(s): EN 362 – EN 12275
- Height (mm) : 116
- Width (mm): 73
- Gate Opening (mm): 23
- Major Axis (kN): 25
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Lock Type: Twist Lock Evolution, Key Lock
- Material: Aluminum alloy
- Automatic lock requires three actions (slide, twist, and pull) to open
- Easy to operate with one hand
- Large opening and keylock nose make clipping ropes and webbing easy
- Contact pete@accessgear.net
Triple action auto-locking HMS carabiner requires three actions to open the gate making it safer than standard 2Lock carabiners, which require two actions to open. This is the best choice when using an auto-locking carabiner to belay
Camp COMPACT OVAL LOCK
- Camp COMPACT OVAL LOCK
- One of the strongest oval carabiners on the market
- Standard(s): EN 362 – EN 12275
- Height (mm) : 106
- Width (mm): 57
- Gate Opening (mm): 16
- Major Axis (kN): 24
- Minor Axis (kN): 10
- Open Gate (kN): 7
- Lock Type: Screw Gate, Key Lock
- Material: Aluminum alloy
- UIAA Certified
- Contact pete@accessgear.net for bulk orders
Compact style of oval carabiner with an exceptional strength to weight ratio. Features a keylock screw gate closure. Locking oval carabiners are ideal for work with pulleys, caving, and big walls and aid climbing.
SOLO 2 – Rope ascender (Camp)
- SOLO 2 – Rope ascender (Camp)
- EN 12841/B for semi-static ropes ranging from 10 to 13 mm.
- EN 567 for semi-static and dynamic ropes ranging from 8 to 13 mm.
- A hyperlight compact ascender with an ergonomic design that makes it very easy to use. Perfect for ascending, verified for traversing, and can also be used in block-and-tackle systems. The
A hyperlight compact ascender with an ergonomic design that makes it very easy to use. Perfect for ascension, verified for traversing, and can also be used in block-and-tackle systems. The lower hole is shaped for optimal positioning of the carabiner while the upper hole fits a safety carabiner to secure the rope. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build up of mud and grit. The opening mechanism is simple and secure with the ability to lock the device open for easier attachment and a removable pull cord that makes it easier to operate while wearing gloves. Aluminum alloy body, precision-cast steel cam. Standards: – EN 12841/B for semi-static ropes ranging from 10 to 13 mm. – EN 567 for semi-static and dynamic ropes ranging from 8 to 13 mm.
Sling 15cm (Perfect for a Canyon Quick Draw)
- A high quality 27kN CE and UIAA sling
- Bluewater dyneema sling
- Comes with 2 x rubber keepers to keep the carabiners in place. (Like the green one on the right)
- Green, Red, Purple if available
- 15cm long
Any questions – Contact pete@accessgear.net
I think the description says all 🙂
Access Gear Caving Bag (large)
- Access Gear Caving Bag (large)
- Thick PVC ripstop
- Very hardwearing – the thickest PVC available
- Quality strong internal loops x 2
- Eyelets in bottom (Ask if you do not want them)
- 700mm(h) x 400mm(w), 36 litres approx
- Strong hanging loops x 2
- Side handle – This makes a lot of sense when carrying the bag.
- Shoulder handle – Try it you will understand what was missing.
- Base handle
- Big cord lock
- The Base is made from extremely durable material, better than ever!
- Royal Blue, Red, Yellow, Black, Light blue etc Ask for colour availability
- Sleeve inside of the bag for foam as standard – Ask if you do not want this!
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
We have updated this cave pack from all of your feedback over the years. The shoulder straps are now in a better position and a more wear resistant bottom panel has been added.
AV Speleoshoulder
- AV Speleoshoulder
- One size fits all chest harness for caving. Not PPE.
- 38mm webbing for comfortable chest strap, each adjustable by a double loop.
- Four webbing loops for hanging small caving equipment (wrench, etc…) or lanyards.
- The chest ascender is held by a narrow central strap.
- “Use with a sit-harness”
- contact pete@accessgear.net
AV Fast Canyon
- AV-fast-canyon
- A Canyoning harness
- Perfect entry level canyon harness
- Fast adjusting buckles
- S/M Black Yellow. M/L Red & Black
- Wetsuit protection included in price!!
- 560g
- Individually dated and numbered for greater monitoring
- Genuinely certified in France – CE, EN 12277 Type C
- 01 XS-M: waist from 50 cm to 75 cm and thighs from 30 to 55 cm maxi (yellow belay loop)
- 02 M-L: waist from 50 cm to 100 cm and thighs from 30 to 70 cm maxi (blue belay loop)
- 03 XL: waist from 50 cm to 125 cm and thighs from 30 to 85 cm maxi (mauve belay loop, black Spankprotect)
- 04 XXL: waist from 50 cm to 150 cm and thighs from 30 to 100 cm maxi (black belay loop, black Spankprotect)
A really nice canyon harness with included bum protector. For this price its a very good deal!
MOLINA CANYONING Steamer Womens Suit (Seland Brand)
SELAND MOLINA CANYONING STEAMER Womens Suit (Seland Brand)
BLACK/GREY/GREEN (LADIES)
Double-lined 4/3 mm Canyoning Steamer special for canyoning guides.
NEW!: Sealed seams outside, new closure system and YKK frontal zipper.
ULTRASTRETCH neoprene (superelastic) on the whole suit.
WARM PLUSH inside to keep warm. Body in 4 mm.
Sleeves in 3 mm, which provides greater comfort and movement.
NEW! Front pocket to keep the camera and additional pocket with cord to keep the whistle (not included).
Horizontal frontal zipper. Below hip pad, and bottom legs part
with Small Diamond, to protect better this area and RUBBER FLEX 06
reinforcement on the hip pad, elbow and knees.
Pre order please
Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
Contact pete@accessgear.net
Canyoning Technical Manual
Canyoning Technical Manual 2021
Main Author and Illustrations by Grant Prattley
Contributing Author Daniel Clearwater
- Clear diagrams with clear writing
- A5 sized 148mm x 210mm
- 180 pages in full colour
- 200+ drawings
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- The essential canyoning technical manual for aquatic canyons covering core canyoning practices. Recreational canyoners will find this manual very useful, especially those coming from other disciplines such as climbing, caving and kayaking. It will also be very useful for guiding and leading as, in addition to the core practices, group techniques are covered.
The essential canyoning technical manual for aquatic canyons covering core canyoning practices. Recreational canyoners will find this manual very useful, especially those coming from other disciplines such as climbing, caving and kayaking. It will also be very useful for guiding and leading as, in addition to the core practices, group techniques are covered.
SMC Small Pulley
- Nylon Sleeve
- Aluminium axle
- Blue/Silver
- Prusik minding
- < 13mm rope
- A simple economic Pulley.
- 59g
- 72 x 44 mm
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
HMS (Camp) Carabiner
- HMS (Camp) Carabiner
- Excellent belay carabiner with secure screw lock
- Large opening and keylock nose make clipping ropes and webbing easy
- Available in polished, blue.
- Standard(s): EN 362 – EN 12275
- Height (mm) : 116
- Width (mm): 73
- Gate Opening (mm): 23
- Major Axis (kN): 25
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Lock Type: Screw Gate, Key Lock
- Material: Aluminum alloy
Large screw gate carabiner designed for belaying and rappelling with either a Munter hitch or standard belay device. Keylocking closure eliminates snagging.
PEÏRA COMFORT Canyoning harness
- A Comfortable Canyon Harness
- French styling 🙂
- CERTIFIED, EN 12277 Type C
- Very high abrasion resistant strap, with a special weaving
- A sheathed gear loop and a mobile gear loop with nylon D-carabiner
- This canyon harness is easily adjustable.
- Removable protection in PVC canvas for the thighs and buttocks
- 01 XS-M: maxi waist 75 cm and thighs from 40 to 55 cm (yellow belay loop)
- 02 M-L: maxi waist 100 cm and thighs from 40 to 70 cm (blue belay loop)
- 03 XL: maxi waist 125 cm and thighs from 40 to 85 cm (mauve belay loop)
If you need a genuine certified canyoning harness, you won’t go wrong with the PEÏRA COMFORT it has been well tested for many years all over Europe.
Large cave pack + Plus
- Large cave pack + Plus
- A slightly larger version of our successful large cave pack https://accessgear.net/products-page/caving-bags/caving-bag-ii-large/
- Thick PVC ripstop
- Very hardwearing – the thickest PVC available
- Quality strong internal loops x 2
- Eyelets in bottom (Ask if you do not want them)
- 700mm(h) x 430mm(w), 40 litres approx
- Strong hanging loops x 2
- Side handle – This makes a lot of sense when carrying the bag through tight passages.
- Shoulder handle – Try it you will understand what was missing.
- Base handle.
- Big cord lock.
- The Base is made from extremely durable material, better than ever!
- Royal Blue, Red, Yellow, Black, Light blue etc Ask for colour availability
- Need a Sleeve inside of the bag for foam (let us know)
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Large cave pack + Plus A slightly larger version of our successful large cave pack https://accessgear.net/products-page/caving-bags/caving-bag-ii-large/
Infierno Wetsuit (Seland Brand)
Double-lined 4/3 mm Canyoning Steamer special for canyoning guides.
NEW!: Sealed seams outside, new closure system and YKK zipper.
ULTRASTRETCH neoprene (superelastic) on the whole suit.
WARM PLUSH inside to keep warm. Body in 4 mm.
Sleeves in 3 mm, which provides greater comfort and movement.
NEW! Front pocket to keep the camera and additional pocket with cord to keep the whistle (not included).
Horizontal frontal zipper. Below hip pad, and bottom legs part
with Small Diamond, to protect better this area and RUBBER FLEX 06
reinforcement on the hip , elbow and knees.
Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
M, MT and L sizes available.
Contact pete@accessgear.net
Quick Draw sling
- Quick Draw sling
- Kordas brand – 15cm long
- Very strong webbing 15mm wide
- Make a canyon quickdraw. Add some HMS carabiners https://accessgear.net/products-page/carabiners-and-maillon-rapides/core-lock/
- This webbing is suitable for extending your abseiling device
- Certified EN566:2017
- Minimum resistance guaranteed 2500 daN.
- Rated 25kN
- https://www.sacidkordas.com/en/express/
- Contact pete@accessgear.net
A very strong webbing product make buy Kordas and certified for use EN566:2017 Use as a quickdraw or Make a canyon quickdraw or even extend your abseiling device. This webbing is suitable for extending your abseiling device.
CAMP NANO 22
- CAMP NANO 22
- One of the lightest carabiners on the market
- Designed for fluid use with ropes of all diameters
- Significantly reduces weight and bulk on any rack
- The design increases strength and reduces weight
- Height (mm) : 86
- Width (mm): 52
- Gate Opening (mm): 21
- Major Axis (kN): 21
- Minor Axis (kN): 8
- Open Gate (kN):9
- Red,Purple,Green or Dark Grey Available
- Contact pete@accessgear.net
The evolution of the Nano continues. Following the popular Nano Wire and Nano 23, the Nano 22 is even lighter, stronger, and more functional. The Nano 22 features a special design that is 1 kN stronger in all three of the strength ratings, a deeper basket for holding the rope in its proper position, and a refined gate for smooth, easy clipping. At 22 grams, the Nano 22 is the lightest fully-functional carabiner on the market with unique attributes that set it apart from other smaller carabiners. Like an inner working space large enough to use a clove hitch with ropes of any diameter, a gate opening wide enough for easy clipping on the sharp end, a profiled nose that slips in and out of tight chain links, and individually racking cams. As the trend towards lighter and faster, bigger and bolder continues, the Nano continues to set the standard for carabiners in the area of lightweight functionality.
Nano Traxion
Nano Traxion the smaller version of the Micro Traxion
- Weight: 53 g
- Certification(s): CE EN 567, UIAA
- Min. rope diameter: 7 mm
- Max. rope diameter: 11 mm
- Sheave type: sealed ball bearings
- Sheave diameter: 18 mm
- Breaking strength: 2 x 7,5 = 15 kN
- Breaking strength as progress capture pulley: 4 kN
- Efficiency: 91 %
- Review here https://www.youtube.com/watch?v=-uNrvrC-_k4&t=910s
Ultra-light and compact: – only 53 g – very compact – hole allows a Sm’D carabiner to be connected to the pulley with a cord, making the device loss-proof Designed for rescue High efficiency: – sealed ball bearings provide excellent efficiency (91 %) – locks even on frozen or muddy ropes – for use on 7 to 11 mm diameter ropes – rope installation diagrams engraved inside pulley
Camp TURBOCHEST – Chest ascender
- Camp TURBOCHEST – Chest ascender
- A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope.
- EN 12841/B for semi-static ropes ranging from 10 to 13 mm.
EN 567 for semi-static and dynamic ropes ranging from 8 to 13 mm. - Much smoother ascending.
- . Self-cleaning holes on both the body and the cam help prevent the build up of grit and grime.
- https://www.camp.it/prodotti3.aspx?CAT=71&CDV=12&ART=~1334#divTesto
- https://www.youtube.com/watch?v=sIv5rUgLQpU&t=71s
- For more info – Contact pete@accessgear.net
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. Self-cleaning holes on both the body and the cam help prevent the build up of grit and grime. Thicker body plates and a shaped connection point reduce wear on the device caused by shifting between the device and the connector (especially when used with steel connectors). This also keeps the device more in line with the body during use. The opening mechanism is simple and secure with the ability to lock the device open for easier attachment and a removable pull cord that makes it easier to operate while wearing gloves. The proprietary rollers also allow the Turbochest to be rigged as a locking pulley for light hauling with a max load of 50 kg, 110 lbs. NOTE: This configuration is not intended for hauling or securing of bodies.
SAR Canyon Pack
- SAR Canyon Pack
- Review of an Access Gear pack here https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- Made for Search and Rescue by Access Gear
- The SAR Canyon Pack is Perfect for overnight missions/expedition canyoning trips
- Based on Access Gears very strong and successful canyon bags, but BIGGER!
- Very well Padded shoulder straps and waist band
- Gear loops inside\Hanging loops outside
- Available in Red, Yellow or Blue.
- Bag size 60ltrs/Lid 5ltrs Aprox
- Proper Zipped Lid with mesh inside for drainage
- Very strong bag – Built to last
- Very strong base best material and build quality throughout
- Massive drainage
- Floatation/padding inside of bag
- Base made from extremely wear/cut resistant material.
- From the grass roots of NZ canyoning
- More details on request.
- Comfort and strength
- Contact pete@accessgear.net For overseas orders
The quality bag that will endure made here in New Zealand for Search and Rescue or those overnight missions where you need a lot of gear! Comfort and strength. Superb quality as you would expect from Access Gear.
Canyoning Jacket
- Canyoning Jacket
- Waterproof jacket in high resistant polyurethane coated polyamide
- Blue colour.
- Extra warmth and wind protection
- Fits over wetsuit for canyoning.
- Large armhole with raglan sleeve for a easy movement
- Fleece lined collar. Self grip fastening.
- Shoulder reinforcement
- A double breast pocket closed by Self velcro fastener.
- Velcro adjustment for the cuffs.
- Extra warmth and protection over wetsuit for canyoning.
- Hood inside collar.
- S ,M, L or XL depending on availability.
Kordas Monik 9.6mm Dynamic Rope
- Kordas Monik 9.6mm Dynamic Rope
- Per/Meter
- Outstanding performance for such a rope size.
- DYNAMIC EN:892
- Diameter 9,6 mm
- Weight per meter 60g
- Weight core 38g
- Core percentage 63,3%
- Sheath slippage 0%
- Elongation 6,5%
- Impact force 830 daN
- Number of falls 7
- Dynamic elongation 34%
- By the meter Vivid Pink or Green
- https://www.sacidkordas.com/en/producte/monik-96-copia/
- Contact for spool prices – pete@accessgear.net
- Review here – https://accessgear.net/wp-content/uploads/2017/08/Micheals-review.pdf
A very robust 9.6mm single rated dynamic rope from Kordas. Monik 9,6 is a very compact and light single rope for those experts climbers who want to minimize the ropes volume and height without giving up the safety and the durability of the rope. Outstanding performance for such a rope size.
Camp Orbit (Gun Metal Grey)
- A lightweight and compact locking carabiner for anchors and rigging, 46 grams each!
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Weight 46 Grams
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net
Petzl COEUR PULSE 12mm
- Petzl Coeur Pulse
- Material(s): 316L stainless steel
- Certification(s): CE EN 795 B
- Reusable
- 12mm x 60mm
- Easy to use:
– simple, rapid installation and removal, without tools, allowing it to be reused
– locking function limits the risk of involuntary removal - Easy clipping:
– the wide, ergonomic connection hole facilitates carabiner clipping
– the width of the hole allows installation of two carabiners at the same time - Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection holeNB : For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges
-
Contact pete@accessgear.net
– simple, rapid installation and removal, without tools, allowing it to be reused (1) – locking function limits the risk of involuntary removal Easy clipping: – the wide, ergonomic connection hole facilitates carabiner clipping – the width of the hole allows installation of two carabiners at the same time Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection hole Hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use (1) For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges.
Kordas Iris 9mm (Green/yellow)
- Diameter 9 mm
- Price p/m
- Colour Green and Yellow
- Material PA (polyamid)
- Relative mass of core 58.9%
- Relative mass of sheath 41.1%
- Rope elongation 3.4%
- Rated 21.30 kN
- 54 g/m
- Type B
- Certified EN 1891
- Pre shrunk
- A superb personal rope for skilled canyoners
A semi-static rope for intensive use in technical canyons. For those who seek a rope which is lightweight and manageable. Available in high visibility green/yellow bi-colour. SUMMUM is the constructive System of the KORDA’S third generation. This joins the already known Estability and Titan System, a chemical fusion and a physical reinforcement, achieving with this a maximum union between core and sheath and an even higher safety, thanks to the addition of the advantages of the two different systems with proved experience. This is the maximum safety that can be offered to the rope users. The only Bi colour ropes in the world are made by Kordas
CAMP OTTO FIGURE 8 (Standard)
- One of the lightest figure eights on the market
- Camps Standard Figure Eight offers a smooth rappel with minimal impact on the rope.
- The secret to rappelling on a figure eight without twisting the rope is to always feed the rope from directly below never hold the rope off to the side or at an angle.
- Rope Diameter Min (mm): 8
- Rope Diameter Max (mm): 13
- Contact pete@accessgear.net
CurTec 6 ltr drum
- CurTec 6 ltr drum
- After testing my own waterproof drums for over 20 years, I can see the value of having a simple, solid dry storage whist getting into your favourite places. This is it!
- Very good value for money, over time these out last dry bags x 10!
- 100% Waterproof – make sure the lid is tightened prior to getting wet.
- 6 liter
- 3.4ltr https://accessgear.net/products-page/extras/curtec-drum/
- Fits in every Access Gear canyoning and cave pack.
- Perfect for keeping gear dry
- Emergency and medical supplies
- Food or cameras etc
- O’ring seal
- Made of polyethylene
- External dimensions: 195mm diametre, 265mm tall
- Opening: 132mm
- Internal depth: 240mm
- Weight: 425g
- Dry bags tend to leak because they are not waterproof, your gear will be wet and your sandwiches soggy, yuk!
- So much quicker to access your equipment than a dry bag.
- Contact pete@accessgear.net
A brilliant option that lasts the test of time. The drum is watertight – Just tighten the lid up prior to entering water 🙂
50mm Single PMP, Black & Green
- Axle: Ball Bearing
- Material: High Quality Aluminum
- Dimensions: 3.97” x 2.9” x 1.37”
- Weight: 6.3 oz (179g)
- Max. Rope: 1/2” (13mm)
- Sheave: 2” aluminum
- 3 Sigma MBS: 36kN (8,093 lbf)
- NFPA1983 Certified
- Made In USA
Prusik Minding Pulleys are especially versatile and may be used in many ways, from progress capture and hauling systems to crevasse rescue, high-lines and Tyrolean traverses. The wide base design maximizes the effectiveness of a Prusik hitch while a unique side plate formation allows the use of larger ropes in a compact pulley ideally suited for 8mm prusik. An oversized bell-shaped top hole accepts 2 large rescue carabiners or multiple small carabiners and allows the carabiners to be rotated freely and completely. Sealed ball bearings provide optimal efficiency and reduce the performance-robbing resistance that is inherent in most multiple component systems. In addition, sealed ball bearings are not prone to failure under misaligned loads or with twisted gear as can be the case with needle bearings. Solid side plates help prevent foreign object access and reduce snagging and are precisely tensioned for easy one-handed operation and secure placement at any point along the rope. FEATURES AND BENEFITS: UL certified to NFPA 1983 “G” General Use. High efficiency sealed ball bearings providing flawless function under conditions that would shut down lesser grade pulleys. Side plates are precisely tensioned for easy one-handed operation and secure placement at any point along the rope. Oversized top hole is designed for use with up to 2 rescue carabiners and is large enough to allow sleeve of locked carabiner to pass through. Low profile fasteners reduce snagging and hanging up when pulley is being moved. Wide base design works most efficiently with Prusik cords of up to 8mm. Made in the USA
Canyon Pack 3
- Canyon Pack 3
- New for 2022!
- Light weight 950gms
- Very strong build quality (best quality materials used)
- 2 x gear loops inside
- Massive drainage through very strong black mesh
- Quick release buckles
- 35Ltrs Aprox!
- Grab handle on back – easy to pick bag up on the go!
- Two strong hanging loops
- Well thought out, no nonsense style to keep the cost down.
- Colours possible Red, Yellow, Orange, Black, Navy Blue, Light Blue
- please ask for availability of colours 🙂
- Many Extras are possible – call Pete 021 1674675 or pete@accessgear.net for attention.
New for 2022, we at Access Gear have made a simple updated canyon bag for the New Year. Moving on from our first ever design but using more mesh than ever for drainage. Originally designed in 2008 – updated three times since – The first and original New Zealand made canyoning bag now updated. Made for purpose!
CAMP OTTO FIGURE 8 (large)
- CAMP OTTO FIGURE 8
- The larger version of Camps Standard Figure Eight for abseiling
- features a larger bottom hole that allows it to be used as a Sticht plate for belaying with single ropes.
- Due to thicker stock, it has even smoother action on rappels
- Rope Diameter Min (mm): 8
- Rope Diameter Max (mm): 13
- Colour Red
- Contact pete@accessgear.net
Canyoning pack – Extreme 2 Light
- Canyoning pack – Extreme 2 Light
- A thing of beauty and Nearly 400 Grams lighter than the Extreme 2 .
- Certainly NOT as tough as its heavier original, https://accessgear.net/products-page/access-gear-canyoning-packs/canyoning-pack-extreme-2-new-11012/ but still strong and available in HOT PINK or VIVID GREEN
- Review here – https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- Massive drainage
- Very comfortable
- 60mm padded shoulder straps
- 60mm Waist band
- Padded back
- Built in Floatation
- Cord gear loop with PVC tube cover
- Strong roomy lid, enough for PLBs emergency gear or what ever
- Strong Handle on back
- Hanging Handle inside (Orange) webbing
- Single ACCESS GEAR made Metal buckle on lid for speed.
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10 years.
- Ultra hard wearing material on bottom with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Draw cord
- Stands up alone – A feature we value as canyoners.
- Best quality materials used on all parts as ever.
- Aprox 45ltrs including lid.
- Colours possible are PINK or GREEN
- Contact for availability.
- 1380gms Aprox
- special order on request. (This takes time ;-))
- Contact pete@accessgear.net
After numerous requests we have finally made a HOT PINK Extreme 2 in a lighter weight fabric. Still strong BUT this is lighter in weight so will not be as hard wearing as the original model <<< *PLEASE NOTE* :-)
Fenix Headlamp HM65R-T
- Fenix Headlamp HM65R-T
- This is a great little lamp because weighs so little but gives so much light
- Up to 1300 lumens spotlight and 400 lumens floodlight.
- Included a 18650 (3400mAh) rechargeable Li-ion battery
- Constant current circuit ensures longer runtime
- Running will never be the same again!
- Reverse polarity protection, to protect from improper battery insertion
- Dual top switches for easy and fast operation
- USB Type-C charging port fast charging
- SPORT headband fit system, headband can be adjusted with a single hand
- Quality aluminum, magnesium and PC made – lightweight and durable
- Size: 80 x 47 x 39 mm
Weight: 91 g (excluding battery)
Battery Type: One 18650 (3400mAh) rechargeable battery
Max Output: 1500lumens - A good review here – https://www.youtube.com/watch?v=whye5E8qek4
- Contact pete@accessgear.net
*WINNER OF THE iF DESIGN AWARD 2021* Uses Luminus SST40 white and Cree XP-G2 S3 neutral white LED’s, with a lifespan of 50,000 hours Lightweight Magnesium Trail Running Headlamp The Fenix HM65R-T rechargeable headlamp is designed for trail running. This new Fenix headlamp is constructed from ultra-lightweight magnesium material. With two LED’s, the HM65R-T can reach 1500 lumens by activating its dual spotlight and floodlight mode with the separately controlled top switches. The primary power option is a single 18650 (3400mAh) battery; as a secondary option, you can also power the HM65R-T with two CR123A batteries. The HM65R-T also features a USB Type-C charging port to facilitate charging of the included 18650 battery. With an all-new body designed from magnesium, the Fenix HM65R-T headlamp has an IP68 rated protection, and 2 meters of impact resistance. The included hollow headband provides comfort and adjustability for a perfect fit in every situation. It is recommended to use the Fenix HM65R-T for trail running trips where you will need to light your path quickly and hands-free.
ORBIT LOCK -3 PACK Orange
- Camp ORBIT LOCK -3 PACK Orange
- A lightweight and compact locking carabiner for anchors and rigging – 46 grams each
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net
The body design of the Orbit Lock adds strength and rigidity while maintaining a truly utilitarian size for everything from anchors and rigging to attaching auto-blocking belay devices where a compact D tends to fit better than larger HMS style carabiners. The proprietary SphereLock nose makes clipping ropes, webbing, chains and pro easy.
Petzl ST Anneau sling 60cm
- Petzl ST Anneau sling 60cm
- A lighter alternative to the all-nylon slings, these are color coded yellow
- Lighter and more flexible than nylon slings
- Very abrasion resistant
- Width: 12 mm
- Strength: 22 kN
- Certification(s): CE, UIAA
NOT in Stock – Buy one of these they are great https://accessgear.net/products-page/extras/8-5-mm-express-dyneema-runner/
SMC small pulley
- SMC small pulley
- Nylon Sleeve
- Aluminium axle
- Orange/Silver
- Prusik minding
- < 13mm rope
- A simple economic Pulley.
- 59g
- 72 x 44 mm
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Curtec drum 3.6ltr
- Curtec drum 3.6ltr
- After testing my own waterproof drums for over 20 years, the value of having a simple solid dry storage place makes sense. This is it!
- Very good value for money, over time these out last dry bags x 10!
- 100% Waterproof – make sure the lid is tightened prior to getting wet.
- Curtec Drum 3.6 ltr
- 6 Ltr – https://accessgear.net/products-page/all-products/6ltr-curtec-drum/
- Fits in every Access Gear canyoning and cave pack.
- Perfect for keeping gear dry
- Emergency and medical supplies
- Food or cameras etc
- O’ring seal
- Made of polyethylene
- External dimensions: 195mm diametre, 170mm tall
- Opening: 132mm
- Internal depth: 150mm
- Weight: 350g
- Dry bags tend to leak because they are not waterproof your gear will be wet and your sandwiches soggy, yuk!
- So much quicker to access your equipment than a dry bag.
- Contact pete@accessgear.net
Perfect for dry storage of your gear. We have used these for 20 years – they only leak if you don’t screw the top up correctly :-)) This I found to be true……
Anellox 12mm hanger (offset)
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 12 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for availability pete@accessgear.net
Iris 9mm (Pink/Lilac)
- Iris 9mm
- Kordas
- Diameter 9 mm
- Price p/m
- Colour pink and purple
- Material PA (polyamid)
- Relative mass of core 58.9%
- Relative mass of sheath 41.1%
- Rope elongation 3.4%
- Rated 21.30 kN
- 54 g/m
- Type B
- Certified EN 1891
- Pre shrunk
- A superb personal rope for skilled canyoners
A semi-static rope for intensive use in technical canyons. For those who seek a rope which is lightweight and manageable. Available in high visibility pink/lila bi-colour. SUMMUM is the constructive System of the KORDA’S third generation. This joins the already known Estability and Titan System, a chemical fusion and a physical reinforcement, achieving with this a maximum union between core and sheath and an even higher safety, thanks to the addition of the advantages of the two different systems with proved experience. This is the maximum safety that can be offered to the rope users. The only Bi colour ropes in the world are made by Kordas
Seland Phuket Wetsuit Jacket 2 MM
- Sealand SUPER STRETCHY NEOPRENE JACKET
- 2 mm neoprene jacket.
- Super-stretchy
- Flatstitched
- RED/black color.
- These are fairy tight in sizing but are designed to be snug.
- L, or XL only
- Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
AustriAlpin No MAD
- AustriAlpin No MAD
- Silver colour
- specially formed figure-8 for canyoning
- Different grades of friction possible,
- Rope size 8.5mm – 11mm
- CE/UIAA cert
- Length 130mm
- Width 90mm
- Weight 107g
- Rated 35kN
- Material Aluminium alloy
- https://www.youtube.com/watch?v=tGQ3cqF9AxE
- Contact – PLEASE ENQUIRE – CLICK HERE
Easy to add friction, and easy tie off.
ORBIT LOCK (3 PACK) Gun Metal Grey
- ORBIT LOCK (3 PACK) Gun Metal Grey SOLD OUT!
- A lightweight and compact locking carabiner for anchors and rigging
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net
- SOLD OUT!
The body design of the Orbit Lock adds strength and rigidity while maintaining a truly utilitarian size for everything from anchors and rigging to attaching auto-blocking belay devices where a compact D tends to fit better than larger HMS style carabiners. The proprietary SphereLock nose makes clipping ropes, webbing, chains and pro easy.
Raumer Anellox 10mm hanger
- Raumer Anellox 10mm hanger
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 10 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for bulk buy pete@accessgear.net
The Raumer Anellox 10mm hanger is the revolutionary new anchor designed to be used with very long bolts or screws Multi Monti. New form that allows a precise and comfortable housing of the bolt in the anchor, speeding up the work. Totally new shape has been designed with a new radius that allows multidirectional traction; you can indeed use it in the three directions, unlike with the old model it is also ideal for equipping roofs or overhangs. It allows the creation of complex rigging systems. The 10 mm hole means it can be attached to the rock using expansion bolts or M10 screw anchors
Extreme 2 Mesh canyon pack
- Extreme 2 Mesh canyon pack
- Black/Red
- The best Build Quality!!
- The best drainage possible
- Very comfortable – 65mm padded shoulder straps and 65mm Waist band
- Padded back
- Built in Floatation (unless you are carrying heavy metal objects)
- Cord gear loop with PVC tube cover
- 2 x gear loops
- Strong roomy lid, enough for PLBs emergency gear or what ever you can get in
- Strong Handle on back
- Hanging Handle inside strong webbing
- Single ACCESS GEAR made Metal buckle on lid for speed!
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10years!!
- The base is the toughest material possible with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Coloured draw cord
- Stands up alone – A feature we value as canyoners
- Simply the Best quality materials used on all parts as ever
- Aprox 45ltrs including lid
- Colours Red/Black
- Can make special orders on request. (This takes time ;-))
- Contact pete@accessgear.net
Our best bag ever we believe. A continuation on the reputation of our original Extreme Mesh canyoning bag used across NZ, we have upgraded the design to higher comfort level a single metal buckle on the lid, a true unique, robust and functional canyoning bag with all the features needed for what you love to do. CANYONING! We can make special orders/custom runs etc pete@accessgear.net Extremely well thought out design. Light in weight /Super Strong in action. High build quality!!!
TRIPLE CHAIN Ø6 L= 37cm A316L
- Raumer 6mm triple chain links for permanent anchor stations and joining hangers together
- 37cm long
- Connect this chain using 2 x stainless steel maillon’s
- Great for connecting anchors or replacing rope/webbing anchors with these permanent anchors
- Durable and suitable for all environments. Like all Raumer anchors, since 2013 made exclusively in AISI 316L Stainless Steel.
- Finished in a pale grey to lessen the visual impact.
- This chain can be clipped by 2 persons simultaneously
- Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
- Weight = 186 gr
- Contact pete@accessgear.net
ORBIT LOCK
- A lightweight and compact locking carabiner for anchors and rigging, 46 grams each!
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Weight 46 Grams
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net
The body design of the Orbit Lock adds strength and rigidity while maintaining a truly utilitarian size for everything from anchors and rigging to attaching auto-blocking belay devices where a compact D tends to fit better than larger HMS style carabiners. The proprietary SphereLock nose makes clipping ropes, webbing, chains and pro easy.
IRIS 9mm CAVING
- Diameter 9 mm
- Colour – White with fleck
- Material PA (polyamid)
- Relative mass of core 58.9%
- Relative mass of sheath 41.1%
- Rope elongation3.4%
- Rated 21.30 kN
- 54 g/m
- Type B
- Certified EN 1891
- Shrink less
- A superb personal rope for skilled cavers
- Price p/m
- Contact – mailto:pete@accessgear.net
AustriAlpin No MAD (BLACK)
- AustriAlpin No MAD
- Special hard coated BLACK colour
- specially formed figure-8 for canyoning
- Different grades of friction possible,
- Rope size 8.5mm – 11mm
- CE/UIAA cert
- Length 130mm
- Width 90mm
- Weight 107g
- Rated 35kN
- Material Aluminium alloy
- https://www.youtube.com/watch?v=tGQ3cqF9AxE
- Contact – PLEASE ENQUIRE – CLICK HERE
Petzl Oscillante
- Material(s): aluminum side plates, nylon sheave
- Certification(s): CE EN 12278, UIAA
- Weight 42 g
- 7mm-11mm
- 71% Efficiency
- Working load 4kN 2 strands 2 kN one Strand
- Breaking Load 15kN
- Aditional info and overseas orders pete@accessgear.net
Light weight hauling/rescue option
Extreme 2 Mesh canyon pack
- Extreme 2 Mesh canyon pack
- Yellow /Blue Extreme 2 mesh
- Black/Red colour here https://accessgear.net/products-page/canyoning-packs/extreme-2-mesh-canyon-pack/
- The best Build Quality!!
- The best drainage possible
- Very comfortable – 60mm padded shoulder straps 60mm Waist band
- Padded back
- Built in Floatation (unless you are carrying heavy metal objects)
- Cord gear loop with PVC tube cover
- 2 x gear loops
- Strong roomy lid, enough for PLBs emergency gear or what ever you can get in
- Strong Handle on back
- Hanging Handle inside strong webbing
- Single ACCESS GEAR made Metal buckle on lid for speed!
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10years!! https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- The base is the toughest material possible with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Coloured draw cord
- Stands up alone – A feature we value as canyoners
- Simply the Best quality materials used on all parts as ever
- Aprox 45ltrs including lid
- Colours Yellow/Blue
- Can make special orders on request. (This takes time ;-))
- Contact pete@accessgear.net
Our best bag ever we believe. A continuation on the reputation of our original Extreme Mesh canyoning bag used across NZ and Australia for over 10 years, we have upgraded the design to higher comfort level a single metal buckle on the lid, a true unique, robust and functional canyoning bag with all the features needed for what you love to do. CANYONING! We can make special orders/custom runs etc pete@accessgear.net Extremely well thought out design. Light in weight /Super Strong in action. High build quality!!
DOUBLE CHAIN Ø6 L= 25cm A316L
- Raumer 6mm double chain links
- 25cm long
- Connect this chain using 2 x stainless steel maillon’s
- Great for connecting anchors or fixing rope/webbing anchors that need replacing with permanent anchors
- Durable and suitable for all environments. Like all our anchors, since 2013 made exclusively in AISI 316L.
- Finished in a pale grey to lessen the visual impact.
- Chain can be clipped by 2 persons simultaneously
- Weight = 125 gr
- Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
- Contact pete@accessgear.net
Allenox 8mm hanger (offset)
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 8 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for bulk buy pete@accessgear.net
You can use it in the three directions, and is also ideal for equipping roofs or overhangs. This anchoring ring is very appreciated in caving and rescue because it allows the creation of complex rigging systems.
NEOPRENE SOCKS ABBS 3 MM
- 3 MM NEOPRENE SOCKS
- 3 mm neoprene socks.
- Pattern in 3 pieces. Glued and blindstitched.
- PU printing sole.
- S, L or XL Sizes available
VT Prusik 7mm
- VT Prusik 7mm
- The VT is a versatile open-end prusik that can be used to tie:
- Symmetric Prusik
- Asymmetric Prusik (Schwabisch/Distal)
- Valdotain Tresse
- French Prusik
- Overall Length: 32″ (81cm)
- MBS End to End: 11.3 kN (2,500 lbf)
- MBS Basket: 22.6 kN (5,000 lbf)
- For personal use on ropes 8 mm to 9.5 mm
Kordas Iris 9mm (60m) Pink/Lilac
- Kordas Iris 9mm (60m) Pink/Lilac
- Length 60m
- Colour pink and purple
- Material PA (polyamid)
- Relative mass of core 58.9%
- Relative mass of sheath 41.1%
- Rope elongation 3.4%
- Rated 21.30 kN
- 54 g/m
- Type B
- Certified EN 1891
- Pre shrunk
- A superb personal rope for skilled canyoners
- https://accessgear.net/products-page/canyoning-rope/iris-9mm/
- Contact – mailto:pete@accessgear.net
A semi-static rope for intensive use in technical canyons. For those who seek a rope which is lightweight and manageable. Available in high visibility pink/lila bi-colour. SUMMUM is the constructive System of the KORDA’S third generation. This joins the already known Estability and Titan System, a chemical fusion and a physical reinforcement, achieving with this a maximum union between core and sheath and an even higher safety, thanks to the addition of the advantages of the two different systems with proved experience. This is the maximum safety that can be offered to the rope users. The only Bi colour ropes in the world are made by Kordas
Petzl Mini prusik minding pulley
- Petzl Mini prusik-minding pulley.
- 25mm aluminium sheave, sealed ball bearings:
- Efficiency 91%.
- Ropes 7-11mm dia.
- WLL 5kN UIAA
- Breaking load 23kN
- 80g
- 7 < 11mm rope.
Special side plates designed for use with a Prusik friction hitch in progress capture systems Sheave mounted on sealed ball bearings for excellent efficiency Compact and lightweight
GUIDE LOCK carabiner (Camp)
- GUIDE LOCK carabiner Camp)
- Camp brand
- A Very strong and durable quality carabiner for heavy use! 32Kn
- Keylock nose for clipping into anchors
- Standard(s): EN 362 – EN 12275
- Height (mm) : 112
- Width (mm): 63
- Gate Opening (mm): 18
- Major Axis (kN): 32
- Minor Axis (kN): 10
- Open Gate (kN): 10
- Lock Type: Screw Gate, Key Lock
- Material: Aluminum alloy
- Contact pete@accessgear.net for inquiry’s and bulk orders
Smooth operating, super strong D screw gate carabiner with a keylock closure to reduce snagging. A great choice for serious mileage.
Raumer Hanger 10mm
- Raumer Hanger 10mm
- Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality.
- Plate for multi directional traction.
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Material: Stainless Steel AISI 316L
- Made in Italy
- Marine version also available now!
- Contact for bulk buy pete@accessgear.net
Plate that has become a classic in the mountaineering and climbing world. Ideal for climbing, mountaineering and rescue. Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality. Plate for multi directional traction. Wide hole that allows two carabiners to be inserted easily and simultaneously Surface made in an opaque matt grey which makes the hanger as invisible as possible, thus reducing the environmental impact. Low Cost.
Mini Canyon Pack
- Mini Canyon Pack
- Small but so tough!!
- Made for lightweight trips or carrying smaller amounts of gear.
- Perfect for speedy canyon descents with lightweight rope
- Based on Access Gears successful canyon bags, but SMALLER!
- Padded shoulder straps.
- Proper sewn on waist band
- Gear loops inside
- Access Gears own unique buckle
- Available in Red, Yellow or Blue. (If available)
- Bag size 20ltrs/Lid 3ltrs Aprox
- Proper Zipped Lid with mesh inside for drainage
- Very strong bag – Built to last
- Massive drainage
- Floatation inside of bag
- Base made from extremely wear/cut resistant material
- From the grass roots of NZ canyoning
- Super cute! But very very tough!
- Contact pete@accessgear.net For overseas orders
NEOPRENE HOOD WITH VISOR
- A neoprene hood – Visor included
- A great extra to keep your head warm.
- One size fits all m++
- There are holes at the ear but – You should check and possibly make a couple of bigger holes at the ear if you want to hear your buddies well 🙂
Petzl Superavanti (New 2021)
- Reinforced for durability:
– leg loops reinforced with thermoplastic polyurethane (TPU) for greater resistance to abrasion
– gear loops in extremely durable high-modulus polyethylene (HMPE)
– high-strength polyester webbing retains smooth adjustment qualities over time
– attachment points entirely reinforced in high-modulus polyethylene (HMPE), for great durability
– rear buckle with wear protector webbing flap - Efficient rope ascents:
– rope ascent efficiency is optimized, thanks to the lower position of the attachment points
– two gear loops on each side, for transport and organization of gear - Adapts to any body type:
– comes in two sizes, allowing you to switch from a children’s size to an adult size
– extensive waistbelt and leg loop adjustment options to fit a wide range of users
– differently colored safety stitching, for quick identification of harness size (yellow stitching for Size 1, black stitching for Size 2) - SIZING BELOW or contact pete@accessgear.net
Color(s) orange/black orange/black Size 1 2 Waist belt 60-95 cm 90-105 cm Leg loops 42-62 cm 52-72 cm Weight 410 g 450 g
Petzl STRATO® VENT
- Petzl STRATO® VENT
- Lightweight and comfortable design:
two-part liner, EPP
-CENTERFIT feature allows perfect centering of the helmet on the head, thanks to its two side adjustment wheels
FLIP&FIT system allows the headband to be positioned in a low position, guaranteeing that the helmet fits securely on the head. - The system folds into the shell for easy storage and transportation
– comes with changeable absorbent comfort foam - Protection designed for work at height and on the ground:
(EN 12492) or on the ground (EN 397).
– shock absorption achieved through deformation of the liner
– ventilation holes allow airflow through the helmet - available in four colors: white, yellow, red and black
- Overseas or inquiries Here
- Head circumference: 53-63 cm
- Weight: 415 g
- Certification CE, EN 12492, ANSI Z89.1 Type I Class C
The clip has two positions, corresponding to these two uses: high strength, limiting the risk of losing the helmet during a fall, and low strength, limiting the risk of strangulation if the helmet is snagged while the user is on the ground – shock absorption achieved through deformation of the liner – ventilation holes allow airflow through the helmet available in four colors: white, yellow, red and black Material(s): ABS (acrylonitrile butadiene styrene), EPP (expanded polypropylene), EPS (expanded polystyrene), nylon, polycarbonate, high-strength polyester, polyethylene
Canyoning Rope
- Canyoning Rope
- Kordas Dana 10
- EN 1891 certified – This is really important please ask!
- The most popular rope used all over New Zealand for good reason
- Well tested for years
- Colors – Orange, Pistachio, Fuchsia
- Sheath core fusion
- Finish Durability: high resistance to abrasion with a nicer touch
- Dry treated Finish TOTAL DRY: thermochemical with fluorocarbon finish
- Diameter 9,9 mm
- Material PA (polyamid)
- Relative mass of sheath 39.4%
-
Core percentage 60,6%
- Rope elongation 2.7%
- Strength 27,80 kN
- Strength in knot 15kN
- Type A https://www.sacidkordas.com/wp-content/uploads/2020/08/DANA-10-2020-ES-EN.pdf
- Weight 63,1 g/m
- Shrink less Canyoning rope
- Sheath slippage 0%
- Price p/m
- More info here on Kordas Dana 10 https://www.sacidkordas.com/en/dana-10/
- Contact for whole spool. PLEASE ENQUIRE – CLICK HERE
The number 1 selling – Used all over New Zealand for a reason. This semi static canyoning rope is made for larger groups Highly manageable and easy to handle and highly visible. There is no need to pre- soak this rope it is preshrunk. Some ropes lose up to 8% of there length on the first use! Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of socking or the cover slipping over the rope. This rope gives a better dimensional stability over its lifetime. Significant reduction of progressive shrinkage of the rope over time. This finish makes it unnecessary to wet the rope before us. The first time you wet it will not shrink and lose between 4 and 8% . Finish Durability: high resistance to abrasion with a nicer touch Finish TOTAL DRY: thermochemical with fluorocarbon finish. The rope is waterproof. Absorbs less water, lasts longer and does not freeze. Great colours and massively popular in europe!
Bluewater VT Prusik 8mm
- Bluewater VT Prusik 8mm
- Made by BlueWater this VT Prusik is the real deal.
- Made from Technora material
- Rated 20kN across from eye to eye
- Rated 29kN Basket
- Two sewn eyes
- 31 inches – 79 cm
- Technora Sheath – This is heat resistant way above other materials.
- Bar tacked using Technora thread
- Manufacturing date and ID number
- Made in the USA
- How to tie a VT here – http://www.netknots.com/rope_knots/valdotain-tresse
- Watch this video https://www.youtube.com/watch?v=Z-xjqI1WOY8
- Testing here https://www.youtube.com/watch?v=szd5upswbVQ
- This specialty design features a tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from flattening and binding up. A computerized large gauge sewing machine is used to bar tack a devilishly strong stitch with our custom Technora thread. This thread / stitch combination yields superior strength and overall durability. Manufactured in the U.S.A.The VT Prusik is a versatile open-end Prusik. Use to tie:
Symmetric Prusik, Asymmetric Prusik (Schwabisch/Distal), Valdotain Tresse, French PrusikThe VT Prusik 8mm performs well when used for ascending, self-belay while rappelling, as a traveling rope grab, or in conjunction with a Prusik minding pulley in haul systems.Overall length: 33″
For use on ropes 8mm – 13mm in diameterTensile Strengths:
End to End: 4,400 lbf
Basket: 6,500 lbf
The original Bluewater VT prusik 8mm – A European idea based from taking strands out of a climbing rope. Much improved buy Rich Carlson and Bluewater using Technora material which is heat resistant so doesn’t melt in use. Don’t be fooled by inferior products – This is it! This specialty design features a tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from flattening and binding up. A computerized large gauge sewing machine is used to bar tack a devilishly strong stitch with our custom Technora thread. This thread / stitch combination yields superior strength and overall durability. Manufactured in the U.S.A. The VT Prusik is a versatile open-end Prusik. Use to tie: Symmetric Prusik, Asymmetric Prusik (Schwabisch/Distal), Valdotain Tresse, French Prusik The VT performs well when used for ascending, self-belay while rappelling, as a traveling rope grab, or in conjunction with a Prusik minding pulley in haul systems. Overall length: 33″ For use on ropes 8mm – 13mm in diameter Tensile Strengths: End to End: 4,400 lbf Basket: 6,500 lbf
Petzl Partner (pulley)
- Petzl Partner (pulley)
- Extremely lightweight and ultra-compact pulley
- Quick and easy installation due to the swinging side plates
- Sheave mounted on sealed ball bearings for excellent efficiency
- Material(s): aluminum side plates, aluminum sheave
- Certification(s): CE EN 12278, UIAA
- Weight 56g
- 7mm – 11mm
- Efficiency 91%
- Working load 5kN
- Breaking Load 15kN
- Contact pete@accessgear.net
NIMBUS LOCK
- Compact HMS belay and rappel carabiner with secure screw lock closure
- New screw gate is lightweight and easy to handle
- Proprietary SphereLock nose makes clipping ropes and webbing easy
- Laser etched marking to indicate if the lock is open or closed
- Height (mm): 101
- Width (mm): 71
- Gate Opening (mm): 22
- Major Axis (kN): 21
- Minor Axis (kN): 9
- Open Gate (kN): 6
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 12275 H
- Contact pete@accessgear.net for inquiries or bulk orders
The Nimbus Lock has all of the benefits of a full-utility HMS locking carabiner in a compact size. The unique shape ideally positions ropes for smooth belays and rappels and the proprietary SphereLock nose makes clipping ropes and webbing easy.
Hanger 12mm 316L Stainless Steel
- 12mm hole
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Material: Stainless Steel AISI 316L
- Made in Italy
- Certified UIAA 123-2 Rock anchor
- Contact for bulk buy pete@accessgear.net
Certifications CE EN 795:2012 – Anchors – type A Complies with EN 959:2007 – Rock anchors UIAA 123-2
Eazi-fit Knee Protectors
- Eazi-fit Knee Protectors
- Make caving, gardening and kneeling great again, use Knee Protectors
- Often worn under overalls
- A must for lava caves
- Save your knees
- Simple velcro fit, fits anyone.
- These last for a long time.
- Overseas buyers contact pete@accessgear.net
Eazi-fit Knee Protectors
I have a pair of these that have lasted well over 10 years!
Canyoning pack – Extreme 2
- Canyoning pack – Extreme 2
- Review here – https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- Massive drainage
- Very comfortable
- 60mm padded shoulder straps
- 60mm Waist band
- Padded back
- Built in Floatation
- Cord gear loop with PVC tube cover
- Strong roomy lid, enough for PLBs emergency gear or what ever
- Strong Handle on back
- Hanging Handle inside (Orange) webbing
- Single ACCESS GEAR made Metal buckle on lid for speed.
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10 years.
- Ultra hard wearing material on bottom with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Draw cord
- Stands up alone – A feature we value as canyoners.
- Best quality materials used on all parts as ever.
- Aprox 45ltrs including lid.
- Colours possible are Yellow, Red, Blue, not always on hand.
- Contact for availability.
- Can make special orders on request. (This takes time ;-))
- Contact pete@accessgear.net
The Canyoning pack – Extreme 2 is a further upgrade on the original hardcore New Zealand canyon pack- Building on the reputation from our original Extreme canyoneering bag used across NZ,since 2010 we have upgraded the design to higher comfort level and added a lid. (a Access Gear first in 2010) A true unique, robust and functional canyoning bag with all the features needed for what you love to do. CANYONING! We can make special orders/custom runs etc pete@accessgear.net Extremely well thought out design. Light in weight /Super Strong in action.
NEOPRENE GLOVES 2 MM
- 2 mm Super-Stretch neoprene gloves
- Glued and blindstitched.
- PU anti-slipping on palm and fingers.
- Perfomed pattern.
- M,L,XL sizes available
Kordas Dana 9mm Canyoning Rope p/m
- Color – Yellow, Pistahio or Purple
- Diameter 9 mm
- Material PA (polyamid)
- Relative mass of sheath 41,7%
- Rope elongation 3,8%
- Strength 22,15 kN
- Strength in knot 12kN
- Type B
- Weight 54,0 g/m
- Shrink less
- Sheath slippage 0%
- For experienced canyoners .
- EN 1891 certified
- Priced p/m
- Contact for spool prices PLEASE ENQUIRE – CLICK HERE
- SOLD OUT!
A semi-static rope for the more technical and demanding canyoners amongst you. For those who seek a rope which is lightweight and manageable. The rope does not need wetting before use, as it is pre-shrunk at the factory. Did you know rope can shrink up to 8% after you buy it! Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of stocking or slip the cover over the rope. Rope gives a better dimensional stability over its lifetime. Significantly reduces the progressive shrinkage of the cord over time. This finish makes it not necessary to wet them before use and that the first time you wet it will not shrink (you won’t lose between 4 and 8% of rope) Finish Durability: high resistance to abrasion with a nicer touch Finish TOTAL DRY: thermochemical with fluorocarbon finish. The rope is waterproof. Absorbs less water, lasts longer and does not freeze
Black Diamond Half Dome helmet
- A great all round helmet
-
Weight : [S/M] 310 g (11 oz) [M/L] 340 g (12 oz)
-
Size Range : [S/M] 48 – 57 cm (19 – 22.5 in) [M/L] 55 – 61 cm (22 – 24 in)
- Colours Grey, Orange, or White (check for availability)
- Contact pete@acessgear.net
Black Diamonds durable, comfortable and supremely adjustable workhorse. Comes in two sizes, please ask what is in stock at time of ordering.
Canyoning Pack (Guide)
- Canyoning Pack (Guide) Access Gear
- The original Extreme canyon bag was Designed in conjunction with canyon guides to produce a hard wearing bag for repeated arduous use. This is the result of an upgrade The new ‘Guide pack‘
- From the basics of the original bomb proof NZ canyon bag! (Nothing outlasts this bag)
- Old style here https://accessgear.net/products-page/canyoning-bags/extreme-canyoneering-bag/
- Now with Padded shoulder straps.
- Extremely tough plastic mesh – very well draining
- Fully tested by canyon guides throughout NZ for many years.
- Simple gear loops inside 2x.(same as past, but better)
- Able to stand up alone for rope packing
- Seams reinforced with extra webbing
- More mesh – more drainage.
- More eyelets in the base – more drainage still.
- 2 x simple hanging loops.(Add your own choice of lanyard)
- The base is a new and better shape, now made with way harder wearing material.
- The bag is more ergonomic than ever before.
- Padded shoulder straps.
- Provision for a waist belt, if you want to use one, which you may well not.
- An optional removable waist belt and optional sleeve for foam.( please ask)
- Back carry handle.
- Very well tested throughout NZ
- Bi-colour bags are now optional at request, like these (see photos).
- 670 mm (h) x 480 mm (w) Flat
- 50+ litres approx.
- More info – pete@accessgear.net
Canyoning Pack (Guide) ‘Extreme Canyon Bag’ remake……. The original Extreme model is the biggest selling canyoning pack in New Zealand, for good reason. These packs have endured years and years of hard guiding and recreation. (nothing outlasted these) We have upgraded and renamed it. Keeping the hard wearing basics and adding more comfort at the same time. Our mission has and always will be, to make the best quality gear that lasts the test of time.
Edelrid Canyoning Rescue knife
- Rescue knife for cutting rope and webbing when canyoning/caving or working.
- ergonomically shaped handle with finger hole for a secure grip when swimming
- high quality stainless steel
- rounded point for additional safety
- robust plastic holder for attachment to a canyoning harness
- Comes with lanyard attached
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Developed specifically according to the requirements of canyoning guides, who work closely together with the Edelrid designers, this knife has an ergonomically shaped handle that allows a secure grip when swimming. The tip of its stainless steel blade is rounded to prevent injuries and the blade also has a slightly curved form to make cutting a rope easier in an emergency.
Camp Core Lock HMS Carabiner
- Camp Core Lock HMS Carabiner
- Extremely smooth HMS belay and rappel carabiner with secure screw lock closure
- New screw gate is lightweight and easy to handle
- Large gate opening and proprietary SphereLock nose make clipping ropes and webbing easy
- Laser etched marking to indicate if the lock is open or closed
- Height (mm): 114
- Width (mm): 77
- Gate Opening (mm): 27
- Major Axis (kN): 23
- Minor Axis (kN): 11
- Open Gate (kN): 6
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 H
- Contact pete@accessgear.net for inquiry’s and bulk orders
The unique shape of the Core Lock HMS carabiner creates a very wide gate opening and positions ropes for the smoothest belays and rappels. The proprietary SphereLock nose makes clipping ropes and webbing easy.
HCR Hanger 10mm (For Marine environments) Best resistance ever!
- Highly resistant to saline corrosion: Also called HCR
- The anchors have been marked with a fish symbol and the initials “INOX”.
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- CE EN 795:2012 – Anchors – type A
- Complies with EN 959:2007 – Rock anchors
- UIAA 123-2
- Made in Italy
- Marine version!!!! HIGH CORROSION RESISTANCE or HCR
- Contact for bulk buy pete@accessgear.net
This Raumer hanger has become a classic in the mountaineering and climbing world. Ideal for climbing, mountaineering, caving, canyoning and rescue. Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality. Hanger for multi directional traction. Now in this ‘Marine’ version for a longer lasting option in the harshest environments!
3 MM NEOPREN SOCKS. (REINFORCED)
- 3 MM NEOPREN SOCKS with REINFORCED BOTTOM
- 3 mm neoprene socks
- pattern in 3 pieces
- glued and blindstitched.
- Sole reinforced with RUBBER FLEX 06.
- Available in S,M,L,XL
Bolts for climbing
- Bolts for climbing (May vary from picture)
- 10mm x 86mm DUPLEX
- 316 Stainless Steel DUPLEX Expansion bolt (Certified)
- Certified https://fiproductmedia.azureedge.net/media/Certification%20Documents/ETA%20European%20Technical%20Assessment/fischer/ZD_ETAB_F_07-0211-1_SEN_AIP_V1.pdf
- Performance documentation
- https://fiproductmedia.azureedge.net/media/Certification%20Documents/DOP%20Documents/fischer/ZD_DOP_EN_FBN-II_DOP-0192_ETA-07_0211.pdf
- New Zealand Speleology Society – Members subsidy contact pete@accessgear.net with your NZSS Number
- Bulk buyers pete@accessgear.net
- Other bolts available just ask.
- Just add a 10mm hanger https://accessgear.net/products-page/climbing-hangers-and-bolts/hanger-10mm-316ss/
Kong Slyde
- Kong Slyde
- Aluminium Alloy
- 44 grms
- Make a adjustable lanyard
- Shock absorbing
Self-locking plate Slyde (even though it was not designed to be an “energy dissipator”) it will also reduce the force of a fall, by acting as a shock absorber. The Slyde is ordinarily used as an adjustable lanyard.
Access Gear 200m Rope bag
- Access Gear 200m Rope bag
- A Large volume, big burly rope bag, with comfort!! (yes it does exist)
- Padded shoulder straps.
- Very strong bag/material as you would expect from Access Gear!
- 2 x Hanging loops one is a handle.
- 2 x loops inside.
- A couple of eyelets in base.
- Pocket inside with foam for comfort.
- Base made from incredibly resilient material.
- A very well thought out design for comfort and volume. (Not just a sack on your back!)
- 70lts aprox.
- Royal Blue colour – Other colours please ask pete@accessgear.net
- Extras available too! ASK 🙂
Carry 200m or a Vast amount of equipment to your job site!
Arborists, Industrial operations, Harwoods hole, Skytower, Rescue operations, SAR this is it!
There was clearly a need for a large volume rope bag/gear bag with comfort. Access Gear have produced just this. Its massive volume means you can take a lot of gear with you (or a really big lunch) with relative ease. All without suffering due to an uncomfortable bag. The gear will weigh the same but this will help you out. Do ask for more info.
Petzl Boreo Helmet
- Petzl Boreo Helmet
- Rugged:
– hard outer shell is impact and scratch resistant for optimal durability
– hybrid construction with thick ABS shell, an EPP foam liner and an EPS foam liner makes it compact on the head
– soft headband conforms perfectly to the shape of the head and folds into the shell for storage and transportation - Head-covering design for optimal protection against lateral, front and rear impact:
– carries Petzl’s TOP AND SIDE PROTECTION product label
– head-covering shape, lower in the rear, offers reinforced protection - Versatile, for a variety of activities:
– suitable for , caving, canyoning, climbing, mountaineering, via ferrata,
– four clips for headlamp attachment - Material(s): ABS shell, expanded polypropylene (EPP) liner, expanded polystyrene (EPS) liner, polyester webbing
- Red, Blue, Green,White when available. Please Ask
- Certification(s): CE EN 12492, UIAA
- 48-58 cm S-M
- 53-61 cm M-L
- SOLD OUT!
Fina 8.5mm (RED)
- Fina 8.5mm RED
- Diameter 8,5 mm
- Material PA (polyamid)
- Relative mass of sheath 42,8%
- Rope elongation 4,6%
- Rated Strength 20,3 kN
- Rated Strength in knot 12kN
- Type B
- Weight 48,3 g/m
- Shrink less
- Sheath slippage 0%
- EN 1891 certified
- Price per metre
The lightest and of least volume semi-static rope. For use by expert canyoners and cavers! Perfect for expeditions and exploration. Its TITAN SYSTEM and highly resistant sheath offer safety features far higher than would be expected from its reduced size.
Made for highly skilled canyoners where weight is a priority. The Korda’s Titan system is more than just a finishing. It is a , patented rope manufacturing system which bestows significant improvements and characteristics on the rope. Until now, ropes basically are made out of two structures: the core and the sheath. Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of stocking or slip the cover over the rope. Rope gives a better dimensional stability over its lifetime. Significantly reduces the progressive shrinkage of the rope over time. This finish makes it not unecessary to wet it before use, it will not shrink (you won’t lose between 4 and 8% of rope on fist wetting) Finish – Durability: high resistance to abrasion with a nicer touch The Titan system incorporates a third structure constituted by a series of filaments running parallel to the rope axis inside the sheath structure, thus transforming it into an element of “armour plating”. The rope does not need wetting before use, as it is pre-shrunk at the factory. From the reel directly to the vertical..
Access Gear Caving Rack
- Access Gear Caving Rack – SHORT VERSION!!
- No one else makes these.
- Short rack. For skilled cavers! 200mm long.
- All new bars, thicker walled tube for way more wear resistance.
- Ask about our thick or extra thick walled bars. You choose!
- Single or double ropes.
- 5 bars for great variability in friction.
- All bars are interchangeable – so longer life still.
- Stainless steel construction.
- Weight aprox- 320 grams depending on bar thickness.
- Less annoying than the long version in a tight spot.
- Doesn’t snag as easy.
- Fits your standard caving rack bars.
- *Fit for 8.5mm – 11mm rope* You will need to test your rope.
- *with the understanding* 8.5mm rope is fast! when new, and SOME old in situ 10 or 11mm rope just won’t bend to fit a short rack.
- Contact pete@accessgear.net for more details.
Being 200mm total in length this little beauty works just like its longer version and has the thick walled bars to last a long long time! Ask about buying the U frame by its self pete@accessgear.net for info. Twice the use of traditional caving rack bars. Will fit your standard rack bars. Access Gear Caving Rack. 3mm thick bars means one third more time on rope before moving them around. All bars are interchangeable – so longer life still. Perfect for expedition caving.
‘Simple’ rope bag
- ‘Simple’ rope bag
- A simple rope bag
- Big enough for general use (100m+)
- Strong thick material and strong sewing.
- Nothing fancy, just very high quality.
- 38ltrs ish!
- Plain with style!
- Red, Black or Blue possible
- Size 620mmH x 320mmW Aprox!
- Contact – pete@accessgear.net for more options
Nothing fancy – Just a good quality rope bag made from quality (non stinky materials) ie high quality European PVC
Petzl PULSE 8mm
- Petzl PULSE 8mm
- Caving anchor.
- Quick to use:
- Material(s): stainless steel, aluminum
- Certification(s): CE EN 795 B
- Drilling diameter 8mm
- Drilling depth 5 cm
- instantly placed by activating the release plunger
- anchor is completely removed by pressing on the release plunger and pulling on the hanger
- easy to install and remove
– locking wrench for extended use or use with groups
– twisted hanger designed to hold the connector parallel to the wall
– interchangeable hanger - More responsible equipment practice for caving:
– the anchor does not rust underground
– the condition of the anchor can be checked - https://www.petzl.com/INT/en/Sport/Anchors/PULSE
Petzl Spatha ( Knife)
- Petzl Spatha
- Smooth/serrated combo blade easily cuts ropes and cordage
- Hole for attaching the knife to the harness a carabiner
- Notch in the blade for opening the knife with bare hands
- Textured wheel for opening the blade when wearing gloves
- Mechanism for locking the blade in the open position
- Stainless steel blade for improved durability
- 43g
- in Yellow or Blue where available!
The SPATHA clippable knife is designed to accompany the caver canyoner or climber on every outing. The profile of the blade allows easy cutting of ropes and cordage. It has a carabiner hole for attaching the knife to the harness. It is easy to manipulate with its textured wheel, even when wearing gloves, and can be locked in the open position.
Beal Asymmetrical carabiner – Triple locking
- Asymmetric screwgate karabiner for lanyards or belay devices
- Its design and shape make it particularly easy to use at the end of a lanyard to clip to a belay.
- When a belay device is used, this asymmetrical karabiner ensures that the device is always guided towards the karabiner’s apex.
- Keylock system
- Lanyards and belaying with a device
- 26kN
- 8kN minor axis
- Belaying and Abseiling
A lanyard/belay carabiner with the added security of a triple lock gate.
Access Gear Caving Rack
- Access Gear Caving Rack
- Made to endure – all bars are interchangeable.
- Used by 100s of cavers.
- All new bars are now even thicker walled tube even for more wear resistance (Updated July 2019)
- Can be used for any rope diameter from 8.5mm – 12mm
- Single or double ropes
- 5 bars for greater variability in friction
- ALL 316 Stainless steel construction/316 Bars
- Weight aprox- 349 gram
- An amazing update on a great product
- Simply longest lasting and ever better value
- Caving racks were made all across New Zealand in the 80s influenced by US designs.
A harder wearing choice for deep cavers! Thicker bar walls longer lasting.
MURUCK (Caving harness) AV
- A very Comfortable Caving Harness
- French styling
- CERTIFIED, EN 12277 Type C
- Very high abrasion resistant strap, with a special weaving
- One sheathed gear loop and a mobile webbing gear loop
- This caving harness is easily adjustable.
- Removable protection in PVC for the thighs.
- 01 XS-M: waist from 55 cm to 75 cm and thigh loop from 45 cm to 60 cm (yellow tie-in sheathing) Not always available. Please ask!
- 02 M-L: waist from 55 cm to 100 cm and thigh loop from 55 cm to 70 cm (blue tie-in sheathing) Not always available. Please ask!
- 03 XL: waist from 55 cm to 125 cm and thigh loop from 65 cm to 80 cm (mauve tie-in sheathing) Not always available. Please ask!
- pete@accessger.net
Sit-harness for caving. Totally adjustable, at waist band and thighs, by steel ladder lock buckles. Two lower sheathed tie-in point for a good performance climbing up the rope. Special 44mm webbing with very high abrasion resistance and special weaving. One colour per size. A fixed and a mobile sheathed gear loop in flat webbing. Removable PVC reinforcement for the thighs (reference AVCA45 Thighprotect). This caving sit-harness is perfectly suitable for collective use as easy to adjust.
Beal Be link Screwgate
- Asymmetric carabiner
- Great for cows tails and belaying
- Major axis 27kN
- Open gate 8kN
- Minor axis 8kN
- UIAA Certified
Best for cows tails and lanyards.
Raumer Belay Station 10mm + Ring 316 SS
- Raumer Belay Station 10mm + Ring 316 SS
- Click on photo for full picture.
- Material: Stainless Steel AISI 316L
- Weight: 296gr
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- CE EN 795:2012 – Type A anchors
- Complies with EN 959:2007 – Rock Anchors
- UIAA
Raumer Belay Station 10mm + Ring 316 SS is a High quality certified stainless steel 316 belay station.
Scurion Battery (4 Cell) 7Ah
- Scurion Battery (4 Cell) 7Ah
- 7 Ah batteries
- 50Wh
- 190g
See the runtime chart here – https://www.scurion.ch/jm19/en/lamps-en-eg/model-overview/scurion-1500-en-gb/37-infos/52-maximum-run-time.html
OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Our lamps are optimized for efficiency. LEDs, converter electronics, batteries, optical and thermal concept, even the cabling is fine-tuned to get the maximum amount of light from one battery charge. When not running on full power all the time, one 4-cell battery pack can last for days. Boost mode? For a few minutes? – Not with a Scurion®! Our lamps have a very effective heatsink and temparature control – Just use them on full power when you want and as long as you want!
Kordas Accessory Cord 6mm
- 6 mm Kordas accessory cord.
- Strength 8.5 kN
- Tie your own prusiks
- Yellow, Red or Green when available
- CE 0120
- Price per metre or contact for whole spool.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
One of the most usefull pieces of gear that you should always carry.
Access Gear Caving Rack bars
- Caving rack bars
- Harder wearing replacement cave rack bars
- Twice the use of traditional caving rack bars
- 316 Stainless Steel
- These will fit your standard rack https://accessgear.net/products-page/ascenders-and-decenders/access-gear-caving-rack-2/
- 2.35 mm thick bars or the very thick 3.3mm means a lot more time on rope before moving them around.
- All bars are interchangeable – so longer life still.
- Perfect for expedition caving
- A full 5 x bars per set.
- Contact pete@accessgear.net
A simple upgrade for your caving rack that will last a long time. Much better that thin walled bars. Extremely accurate cutting so real value for money these will endure and are all interchangeable so no worn out bars on your caving expedition
Suspension Bag
Simple bag for suspending from a harness or object.
- Draw cord
- PVC ripstop
- 2 x Hanging loops
- 1 drain hole on btm of bag ( if needed)
- 10 lires Aprox
- OVERSEAS ORDERS OR BANK DEPOSITS – PLEASE ENQUIRE – CLICK HERE
Beal Be One Screwgate Carabiner
- Compact, lightweight, easy to handle design for belaying and top roping
- Pear shaped for use with belay devices that are use in conjunction with a dedicated carabiner
- Screwgate
- Keylock nose prevents snagging
- Enlarged receiving zone with a 12mm rope contact surface
- Strength – Closed Gate 24kN
- Strength – Open Gate 7kN
- Strength – Minor Axis 7kN
- Weight 86g
- UIAA Certified
- SOLD OUT
Dyneema Foot loop
- Dyneema Foot loop
- Using Genuine Dyneema cord
- Strong stitched webbing and cord
- Adjustable with hardened aluminium slider
- Double thick Nylon webbing for feet (webbing stays open when needed)
- D ring for tidy hanging on harness
- Very thick clear glue heat shrink over top of bartack stitch
- We broke a footloop to test its strength!! Breaking at the adjustment buckle – 6.2kN seems very reasonable for a non PPE footloop to us.
After using many types of foot loops, I eventually decided to make a hybrid all around version incorporating my thoughts and other cavers ideas – ( you know who you are) this is the result. Strength/wear resistance, ease in use, hardened aluminium and the best materials. Hanging D-ring
Raumer Double chain Belay Station + Two rings
- Raumer Double chain Belay Station + Two rings
- Double chain belay station
- Stainless steel AISI 316L, which offers a higher resistance to marine corrosion than AISI 304.
- Radial R = 27 kN Extraction R = 25 kN Weight = 590 gr
- Drill Ø10mm
- 2 Chains and 2 Round Rings Ø10
Kordas Accessory Cord 7mm
- Certified auxiliary rope (EN-564)
- 7mm
- Perfect for prusiks
- 12.5kN ((EN-564 certified)
- Green, Yellow or Red (depending on stock available)
- Kordas brand (made in Spain)
- Overseas orders contact pete@acessgear.net
Great prusik cord, soft to the touch, grips rope as it should.
Holdall (Small)
Similar to the large holdall, tough and resilient. Throw in wetsuits, dive gear, caving overalls, gumboots, ropes – just about anything wet or dirty. Hose out and go again.
Smart enough for airport travel. Also great in the car – molds to the boot space available.
- PVC ripstop
- Plastic two way zip that does not rust and can be locked or cable tied together
- Good dive bag – water resistant.
- 600mm(l) x 300mm(w) x 300mm(h), 50 litres approx
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLCK HERE
Other colours and sizes can be made to order.
Cowstail double 60cm/30cm
NO LONGER SOLD as it is potentially unsafe – we have better options available, please ask.
Belt Buckle 316 stainless steel
- 316 Stainless steel
- Made for re-threading 50mm webbing
- Make your own belt or whatever
- 3 mm thick x 69 mm x 41 mm external measurements
- OVERSEAS ORDERS OR BANK DEPOSITS – PLEASE ENQUIRE –CLICK HERE
Kong Oka
- Canyoning Descender
- Weight: 95g
- Size: 94mm x 141mm
- For rope size 7,8-12,7mm
- Many ways to use this technically designed descender
- Spare rubber connecter for carabiner/descender connection
- SOLD OUT!!!
Kordas Accessory Cord 8mm
- Kordas Accessory Cord 8mm
- 8mm Cord Kordas brand
- Works very well as prusic cord on 10mm rope
- Diameter: Ø 8 mm.
- Weight : 40 gram per meter
- Max. Breaking Strength: 1540 daN
- Material: Nylon (Polyamide 6)
- Yellow Blue or Red (depending on stock available)
- Kordas brand (made in Spain)
- Overseas orders contact pete@acessgear.net
- Tested by a UIAA-approved institute for breaking strength.
- CE 0120 EN 564
- Made in Spain by Kordas
8mm cord has many uses from prussic to anchor building etc. This cord works on muddy caving ropes.
Holdall (Large)
Huge bag, tough and resilient. Throw in wetsuits, dive gear, caving overalls, gumboots, ropes – just about anything wet or dirty. Hose out and go again.
Smart enough for airport travel. Also great in the car – molds to the boot space available.
- PVC ripstop
- Plastic two way zip that does not rust and can be locked or cable tied together
- Good dive bag – water resistant.
- Large 800mm(l) x 350mm(w) x 330mm(h), 90 litres approx
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Other colours and sizes can be made to order.
Multi Monti Plus Screw Anchor Ø10×80 Zinc/Nickel coated (Latest version)
- The original screw anchor now with better upgraded model
- Drill Ø 8mm hole with quality drill bit!
- Ø 10mm x 80mm
- Now with more holding power and larger thread
- longer lasting leading cutting edge, way better than others for ease of use
- Zinc/Nickel coated for better resistance
- 13mm hex head
- Works perfectly with Allenox 10mm
- Build strong removable anchors.
- Reusable – Not more than 3 times!
MULTI-MONTI anchors are a innovative self-threading screw system, and are highly resistant and practical. The first part of the Multi-Monti thread is characterised by thread serration / teeth. When screwed, the anchor cuts into the material and creates the space for the rest of the screw. Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage. The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused. This procedure should not be employed more than three times on rock and only once on granite.
15m Canyoning throw line
- Bag colours available – Pistahio .
- For canyoners
- Vivid Yellow cord
- Light weight at 250 gms
- Very well made
- 6 mm cord
- 15m long
- Bag may vary – please ask
- PLEASE ENQUIRE – CLICK HERE
For that moment that may just happen in fast flowing water!
Small Bag
- PVC ripstop
- Single side strap for suspending bag
- Drawstring
- Many other uses
- 280mm(h) x 120mm(w) 100mm (d)
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Beal triple locking carabiner
- Large HMS belaying karabiner with triple action locking gate (3 MATIC).
- Particularly suited to ropework with double ropes (clove hitch and Italian hitch).
- The generous contact surface area enables smooth working of ropes even when wet.
- Keylock system
- Multi use.
- 26 kN (2600 kg)
- 8kN Minor axis
- SOLD OUT
Contact pete@access gear.net
A large HMS carabiner with the extra security of a triple locking mechanism.
Croll L (Large)
- Croll L (Large)
- Material(s): aluminum frame, stainless steel cam, nylon safety catch
- Weight: 140 g
- Efficiency optimized for wide-diameter ropes:
- Rope compatibility: 8 to 13 mm
- Certification(s): CE EN 567, UIAA
- Weight: 140 g
- The Croll for larger ropes is back!
- Contact pete@accessgear.net
Mini D Karabiner
- Singing Rock Mini D
- Color: various
- Weight: 25 g • 0.88 oz
- Material: aluminium alloy (anodized)
- Strength major axis: 6 kN
- Gate opening (d): 14 mm
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Although not for climbing this is suitable for some non PPE tasks such as – Attaching a chest harness to a D mailion for the frog climbing system. Attaching to your helmet when flaking your rope into a bag for storage. Small tools like bolting gear etc. 6kN is quite a lot really! 🙂
Edelrid Hannibal
- Edelrid Hannibal
- Suitable for single ropes from 7.8 – 12 mm
- Internal rubber ring to hold the carabiner in place – prevents dangerous cross loading
- Geometry designed specifically for canyoning
- Different braking positions due to horns
- High-strength aluminum alloy
- Aluminum
- Certification: EN 15151-2
- Weight: 105 g
- https://www.youtube.com/watch?v=xd0doYWFWds&t=2s
- Contact pete@accessgear.net for more info
The Hannibal by Edelrid is a figure of eight abseil device designed specifically for canyoning with different braking positions.
Petzl Rollclip Z
- Petzl Rollclip Z
- Material(s): aluminum
- Min. rope diameter: 7 mm
- Max. rope diameter: 13 mm
- Sheave diameter: 18 mm
- Maximum working load: 2 x 2 = 4 kN
- Efficiency: 85 %
- Major axis strength: 20 kN
- Minor axis strength: 8 kN
- Open gate strength: 7 kN
- A really nice piece of kit!
Easier handling: – sheave mounted on sealed ball bearings for excellent efficiency – gate opening on the non-pulley side, to facilitate installation on devices – Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place H cross-section of carabiner: – ensures an improved strength-to-weight ratio – protects markings from abrasion – SCREW-LOCK: the manual screw-lock with red band provides a visual warning when the carabiner is unlocked
Small Kit Bag ( With Mesh for water drainage )
Great bag for carrying your srt gear when canyoning or in wet caves, or anywhere that involves lots or water. Good for shorter lengths of rope i.e or rigging in canyons etc!
- Free Draining strong black mesh
- adjustable shoulder strap.
- one webbing loop on side for attachment to harness.
- 400 mm (h) x 300 mm (w)
- 9 litres approx.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
This bag is great when you have little to carry or you have some great friends who carry all the gear for you! It is also very useful for holding anything whilst canyoning e.g smaller lengths of rope for rigging etc.
Webbing 15mm
- Very high quality 15 mm tubular webbing.
- Red, Black, when available!
- UIAA Certified
- 13.4 KN rated minium strength.
- Price per metre or contact for whole spool.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- UIAA Certified webbing https://theuiaa.org/documents/safety-standards/103_UIAA_Tape%20V3_2018.pdf
- Check your webbing supplier for lesser quality – This product is excellent.
- Contact pete@accessgear.net
Petzl Huit
Petzl Huit
- Square shape helps reduce rope twist and girth hitch formation
- Compact and lightweight
- Small hole can be used with thin ropes if necessary, or as a belay plate
- Material(s): aluminum
- Weight: 100 g
- Rope compatibility: 8 to 13 mm (single and half ropes)
- https://www.petzl.com/INT/en/Professional/Descenders/HUIT
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Petzl Tibloc
- Petzl Tibloc
- Extremely compact and lightweight:
- An efficient piece of basic equipment
- Can be used as a progress capture device in a hauling system or for ascending ropes
- Material(s): stainless steel
- Weight: 35 g
- Rope compatibility: 8 to 11 mm
- Certification(s): CE EN 567, EAC
Material(s): Stainless steel Weight: 39 g Rope compatibility: 8 to 11 mm rope with a locking carabiner Certification(s): CE EN 567, UIAA
Ring Hanger 10mm
- Ring Hanger 10mm
- The most popular ring hanger out there
- 316L Stainless Steel
- Plate bent at 40°
- Stainless Steel Round Ring Ø 10 mm bolt needed
- The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility.
- The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
- Low friction rope retrieval as the weight is spread over 360°.
- Made in Italy
- Contact for bulk pricing pete@accessgear.net
A very popular Ring Hanger 10mm used for mountaineering, climbing and canyoning anchor, used to equip simple, efficient and secure belays at a very competitive price. Used in pairs (for obvious safety reasons); usually with one as the load-bearing anchor and the other as a passive back-up. CE EN 795:2012 – Anchors type A Complies with EN 959:2007 – Rock anchors Weight: 132 gr Thick: 3,5 mm Dimensions: 44 x 92 mm Static Shear Strenght: 25 KN Extraction Static Strenght: 29 KN Usable by 1 person at a time UIAA 123 – 2
Raumer ROCK hanger Ø10 + 2 round rings hanger inox Ø10
- Raumer ROCK hanger Ø10 + 2 round rings
- Hanger inox Ø10
- Stainless Steel AISI 316L Bolt Hanger with 2 x round rings
- 10mm hole for fixing
- Weight: 225 gr
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Usable by 1 person at a time
- Easier rope pull down with double ring
A quality Stainless Steel AISI 316L Bolt Hanger with 2 x rings.
Access Gear Mesh Zip Bag
Perfect storage for wet items, due to the fact it allows them to dry.
- Sturdy mesh
- Hanging loop on side
- 300 mm zip along top
- 300 mm x 300 mm
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
PETZL SHUNT
- PETZL SHUNT
- Easy to install on the rope
- Smooth clamping surfaces won’t damage rope
- May be used to ascend single or doubled rope
- Material(s): aluminum frame
- Weight: 188 g
- Rope compatibility: single ropes 10-11 mm or doubled ropes 8-11 mm
- Certification(s): CE EN 567, UIAA
Petzl St’Anneau Sling 120cm
- Petzl St’Anneau
- Useful 120cm length
- Made in France
- Red/white
- 22kN rated CE UIAA EN566
- Dynema 40g
- Nice and light weight!
Petzl Basic ascender
- Petzl Basic
- Material(s): aluminum frame, stainless steel for the cam, nylon for the trigger
- Weight: 85 g
- For use with single ropes between 8 and 11 mm
- Certification(s): CE EN 567, UIAA
- Made in: France
- Contact pete@accessgear.net
Compact ascender with excellent grip Can be used for rope ascent on a fixed line or as progress capture in a hauling system Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes) Stainless steel cam has better resistance to corrosion Lower attachment hole large enough for two carabiners (lanyard and foot loop) Upper connection hole for guiding the rope
Kordas Iris, 10mm Abseiling rope
- Kordas Iris, 10mm Abseiling rope
- Color White – Red and green stripes
- Superb abseiling rope!
- Total binding of the sheath to the core
- Diameter 9.9 mm
- Material PA (polyamid)
- Relative mass of sheath 45%
- Rope elongation 2.6%
- Strength 26 kN
- Type A
- Weight 67 g/m
- Shrinkless https://www.sacidkordas.com/en/shrink-study-on-ropes/
- Sheath slippage 0%
- EN 1891 certified
- Hard wearing
- Priced p/m or contact pete@accessgear.net for spool price and overseas inquiries.
Complete with 0% shrinkage a lovely to handle rope for groups and intense use. Did you know you can loose up to 8% of your rope when it first gets wet, but not with Kordas ropes – they are preshrunk! Kordas ropes also have no sheath slippage. Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of stocking or slip the cover over the rope. Rope gives a better dimensional stability over its lifetime. Significantly reduces the progressive shrinkage of the cord over time. This finish makes it not necessary to wet them before use and that the first time you wet it will not shrink (you won’t lose between 4 and 8% of rope) Finish Durability: high resistance to abrasion with a nicer touch Finish TOTAL DRY: thermochemical with fluorocarbon finish. The rope is waterproof. Absorbs less water, lasts longer and does not freeze
MiniMi Pink, Green or Purple
- AustriAlpin
- HMS Carabiner ( smaller than Rondo)
- Pink, Green or Purple
- Ideal carabiner for all-around use.
- Contact pete@accessgear.net
Small, light and practical – the MiniMi is the high-performance little brother of the Rondo. The MiniMi also benefits from a fresh design and the round profile which allows for both fluid and secure rope management. The MiniMi is made with a self-cleaning screwgate and thus combines all positive qualities in a small and usable carabiner model.
Petzl Ascention ( Right hand ascender)
- Petzl Ascention
- Ascender for ascending rope.
- Material(s): aluminum, stainless steel, plastic, rubber, nylon
- Weight: 165 g
- Rope compatibility: 8 to 13 mm
- Certification(s): CE EN 567, UIAA
Designed for ascending a rope Simple to use, and effective: – ergonomic molded handle allows a comfortable yet powerful grip – wide opening allows the handle to be easily grasped, even with thick gloves. – ergonomic upper part to maximize power when pulling with two hands – safety catch is totally integrated into the body of the ascender to help prevent snagging – toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or dirty ropes…) – wide lower hole allows the carabiners of the CONNECT ADJUST lanyard and FOOTAPE or FOOTCORD footloop to be easily attached – upper hole for clipping a carabiner around the rope Available in left-handed and right-handed versions
Small Kit Bag
Great bag for bolting or carrying your srt gear when caving made from PVC ripstop.
- adjustable shoulder strap.
- one webbing loops on side for attachment to harness.
- 400 mm (h) x 300 mm (w)
- 9 litres approx.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
MINI D screw lock
- D shape
- screw lock
- suitable for holding some device on your harness etc.
- Colour: black + gold/silver
- Weight: 28 g • 1 oz
- Material: aluminium alloy (anodized)
- Strength major axis: 3 kN
- Gate opening (d): 12 mm
- This carabiner is not intended for climbing or belaying!
Petzl Torse
- Petzl Torse
- Simple construction
- Rapid buckle facilitates placement and removal of the strap on the harness
- DoubleBack buckle for quick, precise adjustment
- Superior quality webbing for excellent durability
Specifications Material(s): aluminum DoubleBack adjustment buckle, plastic rear buckle, abrasion resistant polyester webbing References References C26 2 Weight 90 g Guarantee 3 years Packing 1
Petzl Croll S
- Petzl Croll S
- Smaller and lighter than the L model
- Stainless steel wear plate improves durability
- Catch is opened by pinching for simple quick manipulation
- Lower hole angled to keep the CROLL chest ascender flat
- Upper hole for attaching a chest strap to keep the rope clamp in position
- Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch
Weight: 85 g
Rope compatibility: 8 to 11 mm
Certification(s): CE EN 567, UIAA - Add one of these https://accessgear.net/products-page/caving-harnesses/av-speleoshoulder/
- Petzls website – https://www.petzl.com/INT/en/Sport/Ascenders/CROLL-S
- Contact here
Description Efficient and easy to use during rope ascents: – used with the BASIC ascender or the ASCENSION handled ascender for rope ascents – lower hole is angled to keep the chest ascender flat – upper hole for attaching a TORSE shoulder strap to keep the ascender in position – catch is opened by pinching, for simple, quick manipulation Reinforced for durability: – stainless steel wear plate for improved durability – stainless steel cam has better resistance to corrosion Adapted for intensive caving: – compatible with ropes measuring 8 to 11 mm in diameter – lightweight, only 85 g – toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes…) Specifications Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch Weight: 85 g Rope compatibility: 8 to 11 mm Certification(s): CE EN 567, UKCA, UIAA
Access Gear 2 Ltr Pod Bag (bolt bag)
- Access Gear 2 Ltr Pod Bag (bolt bag)
- Access Gear original bag + option for mesh
- Great for rigging tools/Bolts etc
- Two hanging loops
- Very tough made to last!
- Hooded top for gear security
- 2 ltrs approx
-
As an option ask for mesh on bottom for drainage, Since 2012 Access Gear original.
-
The original, strongest well tested – since 2010.
- Made in New Zealand
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
A smaller version of the 7 ltr which is also available with mesh on the bottom.
7 Ltr Pod Bag
- 7 Ltr Pod Bag
- The original bag Since 2010 (Copied but never bettered)
- Now also available with a Bit of pipe for stiffening the top! (See pictures of colour options)
- 3 great options – 1 Solid base 2. Mesh base 3. with pipe for stiffening.
- Great for industrial abseilers
- Two hanging loops
- Two internal loops
- Very tough
- 7 ltrs approx
-
Also available now with mesh on the bottom for drainage, Since 2013, our idea 😉
- Made in New Zealand
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Please ask for colour choice on the day. Also available with mesh on the bottom for drainage!
Petzl Pantin ( Right foot ascender)
- Material(s): aluminum frame, stainless steel cam, nylon, Dyneema® straps
- Weight: 85 g
- Rope compatibility: 8 to 13 mm
- The PANTIN is not an item of PPE
Designed to make rope ascents more efficient and less tiring Cam facilitates rope glide on the first few meters Toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes…) Stainless steel cam has better resistance to corrosion Mechanism is totally integrated into the body of the ascender to help prevent snagging Releases from the rope with a simple backwards movement of the foot Foot strap is 100 % Dyneema® to resist abrasion Easy adjustment with DoubleBack buckle Comes in two versions: PANTIN right foot and PANTIN left foot
Petzl Spirit Screw – Lock
- Petzl Spirit Screw lock
- Carabiner optimized for lightness and durability
- very compact shape is ideal for belay stations
- H-shaped cross section offers an improved strength/weight ratio
- wider contact surfaces for better rope glide and reduced wear on the carabiner
- Easy to use, for efficient handling:
- SCREW-LOCK locking sleeve for good handling and effective locking
- Red visual indicator facilitates checking that the carabiner is locked
- nose and Keylock system helps avoid the carabiner snagging during maneuvers
- carabiner designed for better rope glide and to ensure good positioning of the belay device
- shape adapted for easy tying or untying of a clove hitch
- SOLD OUT
Kordas Kloe 9,8mm Dynamic rope
- Kordas Kloe 9,8mm Dynamic rope
- Sheath and the core completely bonded Kordas with SUMMUM system
- Total dry treatment
- Durability
- Pink/Black or Green/Black
- Light and flexible
- Great for cows tails
- Rated EN 892
- Price per Meter
- How to tie your own cows tails – https://www.youtube.com/watch?v=Nz3czTQTSa8
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
Single dynamic climbing rope EN-892 Kloe 9.8 is the first dynamic rope that includes de innovative SUMMUM system, which is exclusive of Korda’s and joins Estability and Titan System technology to guarantee the maximum bonding of the sheath and the core. Thanks to Summum and the resistant sheath it offers the maximum durability of the rope without giving up the lightness and manageability. – See more at: http://www.sacidkordas.com/en/sport/escaladaalpinismo/kloe-98#sthash.6aiAM9qO.dpuf
Rope Protectors (Large)
Great for protectiong your ropes from sharp edges. Handrails, gutters, rocks etc
- Double Canvas or PVC ripstop
- Very hardwearing
- Velcro fastening
- 750mm long
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Pod Bag
- Pod Bag
- Access Gear Original
- PVC ripstop. VERY STRONG!
- Two webbing loops on side for attachment to harness.
- 400 mm (h) x 200 mm (w)
- 14 litres approx.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- Open, bucket like bag with drawstring to close. Superb industrial abseilers bag – also great for lighting riggers etc. Great access to tools when hanging off a rope.
Pod Bag Open, bucket like bag with drawstring to close. Superb industrial abseilers bag – also great for lighting riggers etc. Great access to tools when hanging off a rope.
Raumer 316SS Resin Anchor 12mm
- Raumer 316SS Resin Anchor 12mm
- Weight: 235 gr
- Dimensions of the shank: Ø 12 x 150 mm
- Static Shear Strenght: 35 KN
- Extraction Static Strenght: 35 KN
- Material: Stainless Steel AISI 316L
- Certifications
Compliance certificate EN 959:2007 – Rock Anchors
Compliance certificate UNI 11578:2015 – type A Anchor
UIAA 123 – 2
Certifications Compliance certificate EN 959:2007 – Rock Anchors Compliance certificate UNI 11578:2015 – type A Anchor UIAA 123 – 2
Petzl Omni Triact lock
- Petzl Omni Triact lock
- Multi-directional carabiner
- Fasten the harness by joining the two attachment points
- Used for connecting a CROLL ( chest ascender)
- Strength: 15 kN (in all directions)
- Keylock system helps prevent the carabiner snagging during manoeuvres
- TRIACT-LOCK: automatic locking with triple-action gate opening
Simply the best central harness connector. Easy to put on and off.
PETZL MICRO TRAXION
PETZL MICRO TRAXION
- Ultra-light and ultra-compact progress capture pulley (volume and weight 50 % less than the MINI TRAXION)
- Sealed ball bearings provide excellent efficiency (91 %)
- Cam can be locked in open position so device can be used as a simple pulley. Works even on frozen or muddy ropes.
- For use on 8 – 11 mm diameter ropes
- Rope installation diagrams engraved inside pulley
- Designed for crevasse rescue, hauling, self-rescue and as an emergency ascender
Specifications
- Weight: 85 g
- Certification(s): CE EN 567, UIAA
- Min. rope diameter: 8 mm
- Max. rope diameter: 11 mm
- Sheave type: sealed ball bearings
- Sheave diameter: 25 mm
- Working load: 2 x 2.5 kN
- Breaking strength: 7,5 x 2 kN
- Working load as progress capture pulley: 2.5 kN
- Breaking strength as progress capture pulley: 4 kN
- Efficiency: 91 %
Kordas 9mm Merce Climbing rope
- Kordas 9mm Merce Climbing rope
- Dynamic Half rope.
- Durable
- Stability (Sheath and core bonded)
- Dry treated
- Black/red/yellow
- Light and flexible
- Great for light weight cows tails
- How to tie your own cows tails – https://www.youtube.com/watch?v=Nz3czTQTSa8
- Rated EN 892
- Price per Meter
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
Would you like to check out all the information about this product in PDF format? Now you can download easily Merce 9 Korda’s technical manual http://www.sacidkordas.com/sites/default/files/merce_9_en_2016-01.jpg
Access Gear/Mesh Throw Bag (the original)
Good canyoning throw bag, or great for arborist work.
The original full draining throw bag since 2010.
- PVC ripstop
- Double internal loops for tying rope off
- Two handles
- Extremely Tough
- Superb drainage
- Stands up alone
- Drawstring top closure
- 320 mm (h) x 250 mm (w)
- 13 litres approx
- White mesh or black mesh.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- DISCONTINUED WE HAVE BETTER OPTIONS NOW – PLEASE ASK!
Petzl Attache
- Petzl Attache
- Carabiner optimized for lightness and durability:
- very compact shape is ideal for belay stations
- H-shaped cross section offers an improved strength/weight ratio
- wider contact surfaces for better rope glide and reduced wear on the carabiner
- Easy to use, for efficient handling:
- SCREW-LOCK locking sleeve for good handling and effective locking
- visual indicator facilitates checking that the carabiner is locked
- nose and Keylock system helps avoid the carabiner snagging during maneuvers
- carabiner designed for better rope glide and to ensure good positioning of the belay device
- shape adapted for easy tying or untying of a clove hitch
Raumer Marine grade stainless steel Ø10
- Raumer Marine grade stainless steel Ø10
- Marine grade P anchor!!
- Weight: 148 gr
- Dimensions of the shank: 10 x 120 mm
- Static Shear Strenght: 30 KN
- Extraction Static Strenght: 30 KN
- Usable by 1 person at a time
- Warranty: 3 years
- Certifications
- Compliance certificate EN 959:2007 – Rock Anchors
- Compliance certificate UNI 11578:2015 – Devices type A
- UIAA 123 – 2
“MARINE” Version , highly resistant to saline corrosion. These anchors have been marked with a fish symbol and the initials “INOX”. Good for sea spray areas.
Rope Protector(Small)
- Rope-protector small
- Ideal where weight is an issue – eg. caving/canyoning/climbing
- Single layer PVC ripstop
- Webbing underneath for extra wear resistance
- Velcro fastening
- 500 mm long
- Webbing loop for holding in place
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Petzl Foot Tape
- Petzl Foot Tape
- Attaches to the ASCENSION ascender for rope ascents
- Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into
- Adjustable elastic keeps feet in the loop with any type of shoe
- DoubleBack buckle easily and quickly adjusts length of foot loop
- Material(s): nylon, steel
- Weight: 65 g
Rope Marker pens (Kordas)
- For marking your ropes
- From Kordas
- Will not damage your rope
- Red or black
- Mark the middle and the ends for clarification
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE CLICK HERE
Simple preventative measure.
Stainless Steel AISI 316L Bolt Hanger – “ALIEN” Ø10
- 316SS double hole hanger
- Radial R the lower hole = 27 kN
- Estraction R in the upper hole = 16 kN
- Weight = 57 gr
Rig from one hole and clip the other. Added possibility’s for use. High quality 316 Stainless Steel.
Bolts Stainless Steel (Certified) 120mm
- 10mm x 120mm
- Stainless Steel expansion bolt
- Just add a 10mm hanger
- Certified CE 0679
- New Zealand Speleology Society – Members subsidy contact pete@accessgear.net with your NZSS Number
- Bulk buyers pete@accessgear.net
- Other bolts available just ask.
Pull Down Cord 6mm
- 6 mm pull down cord.
- Colours vary – Red, Blue or Yellow.
- Approx breaking load 700 KGs (Not rated for abseiling)
- Made in the New Zealand
- Save weight
- Price per metre or contact for whole spool.
- Contact for post prices
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Made for the marine industry this high quality cord will save you carrying what you don’t need to. In the right situation, half your rope and carry 6mm pull down cord instead. Made in NZ. Not rated for climbing.
Maillon Rapid Delta 7mm Stainless Steel (PPE)
- Stainless Steel
- 7mm Delta
- 59 grams
- Breaking Load 31kN
- Certified PPE – Individual number!
- The only Delta with a EN cert!
Delta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.
Petzl Footcord
- Petzl Footcord
- Attaches to Ascenders for rope ascents
- 100 % Dyneema for increased durability
- Elastic keeps foot in loop. It is adjustable in length, so it works with any type of shoe and stores easily when not in use
- Plate for adjusting foot loop length
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Material(s) : Dyneema, aluminum Weight : 40 g!
Cord lock for 5-7mm cord
- Large cord lock for your all bags
- Will fit 5 – 7mm cord
- Strongly sprung and easy to use
- Upgrade your bag with this.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
Forget your plastic cord locks these will keep your bag in order.
Access Gear Extreme Canyoneering Bag
- The original bomb proof NZ canyon bag! ( Nothing outlasts this bag)
- very well tested throughout NZ for over 7 years.
- Extremely tough plastic mesh – very well draining
- Fully tested by canyon guides throughout NZ
- Double internal loops for tying rope off
- Able to stand up alone for rope packing
- All seams reinforced with extra webbing
- Four drain holes in bottom.
- Double webbing on shoulder straps
- 700 mm (h) x 480 mm (w)
- 44 litres approx
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Access Gear – Belt.
- Access Gear – Belt.
- A High quality, easy to use belt
- Hardened Aluminum
- High quality 25mm 1300kg breaking strain webbing!
- Choose your colour – Black, Red, Blue or Gold.
- Four sizes Small- 75cm >85cm Med – 85cm >95cm
- Large 95cm >105cm X Large 105cm > 115cm
- There is a bit of flexibility in the sizing – a couple of cm either way!
- Webbing standard is black, but red is available on request.
- MADE IN NEW ZEALAND
- OVERSEAS ORDERS OR BANK DEPOSITS – PLEASE ENQUIRE
- CLICK HERE
Maillon Rapide Peguet 6mm Stainless Steel (Not PPE)
- Genuine Maillon Rapides made in France
- 6mm
- Stainless Steel
- B/L 32kN
- A high quality screwlink but not rated as PPE
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
‘Aqua’ Blue ( Canyoning/Canyoneering gear bag)
- Aqua’ Blue ( Canyoning/Canyoneering gear bag)
- Aqua Blue perfect size for general canyoning
- Best for taller canyoners or 180cm + (over 5ft 11Inches)
- Made for best drainage ever (see quality mesh)
- Wear area uses super tough Black material
- Takes kegs and drums perfectly
- Rounded bottom for less wear while climbing down rock/waterfalls
- Sternum strap
- Waist Band
- Hanging loops inside and outside of lid
- Padded shoulder straps
- Pocket inside lid for small gear storage etc. Includes cord loop inside for keys
- Four gear loops inside of bag and one on right shoulder strap
- Padded back
- Extra foam inside pocket in bag. Removable for emergencies etc.
- 72cm h x 20cm d x 31cm w – 45 litres aprox+inside lid space.
- Overseas orders contact pete@accessgear.net
- 1.7kgs Aprox
This new design is lighter These new ‘Aqua’ canyoning bags will cater for you extremely well, with all the features you need in one hard wearing pack.
Kordas Iris 10mm p/m
- Kordas Iris 10mm
- Min. breaking force 27.30 kN
- Min. breaking strength of 15 kN knot
- Diameter 10 mm
- Weight 63.1 g / m
- Elongation 50-100 kg 3.6%
- Material: polyamide
- color: Green /Yellow
- Relative mass of sheath: 42%
- No slippage of sheath!
- Shrinkless Type A
- EN 1891 certified
- Price per meter
- Spool PLEASE ENQUIRE – CLICK HERE
A semi-static rope for intensive use … the only two-colored rope on the market, available in clearly visible Orange / Fushia color combination. SUMMUM is the constructive system of the Korda’s third generation. This joins the already known Estability and Titan System, a chemical fusion and a physical reinforcement, Achieving withthis a maximum union between core and sheath and an even higher safety, thanks to the Addition of the advantages of the two different systems with Proved experience. This is the maximum safety that, until now, can be offered to the rope users.
Maillon Rapide Peguet 6mm Oval Steel (Not PPE)
- 6mm Oval (Not PPE)
- Zinc plated Steel
- 35 grams
- WLL 400kg
- B/L 2000kg
- The quality brand Peguet
The best quality brand.
Kordas Monik Climbing rope 60M length
- Kordas Monik Climbing rope 60M length
- 60m x 9.6mm Kordas Monik Climbing rope
- EN-892 Rated single rope
- NEW colours Bright Pink and Vivid Yellow
- Total dry treatment
- Durability
- Light and flexible
- No shrinkage like some ropes!
- Complete bonding of the sheath to the core! (Kordas were the pioneers of this)
- Outstanding performance for such a rope size
- Diameter 9,6 m
- Weight per meter 60g
- Weight core 38g
- Core percentage 63,3%
- Sheath slippage 0%
- Elongation 6,5%
- Impact force 830 daN
- Number of falls 7
- Dynamic elongation 34%
Review here – https://accessgear.net/wp-content/uploads/2017/08/Micheals-review.pdf
OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
Single dynamic climbing rope cuerda_simple.jpg EN-892 Monik 9,6 is a very compact and light rope for those experts climbers who want to minimize the ropes volume and height without giving up the safety. Outstanding performance for such a rope size. It includes the Estability finishing, exclusive of Korda’s, who have been the pioneer of the union of sheath and the core, avoiding the unpleasant sock effect.
Maillon Rapide Peguet wide 7mm (PPE) Stainless Steel
- 7mm Wide (PPE)
- Stainless Steel
- 35 grams
- B/L 40kN
- The quality brand Peguet
- UIAA Certified
- PPE carry individual numbers on each piece. https://accessgear.net/wp-content/uploads/2020/08/Peuget-Maillon-Rapides-PPE-2.pdf
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Access Gear Mini Cave pack/ Rigging bag
- Access Gear Mini Cave pack/ Rigging bag
- 7/8 litres aprox
- Adjustable Shoulder straps
- Made to last
- Hanging loop
- 2 x drawcords to keep your gear where you want it
- Can be use in addition to large bag and taken where you don’t need a normal sized bag
- Best materials use
- Ask for colours available – Orange Red, Pink,Purple,Blue,Green. If available!
- A super version of this is available for an additional $20 Not all colours available (material costs only)
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE CLICK HERE All prices include NZ tax at 15%
A really tough small bag, good enough for dragging around in a cave. This also doubles as a great rigging bag that can handle the new ‘small’ rotary hammer drills that are available these days plus all the usual rigging gear. If you decide to go for the upgraded material option, you won’t be let down. Either of these material options will be good for many years to come.
Beal Dyneema webbing
- Beal Dyneema webbing
- Highly resistant to breakage and abrasion and easy to knot.
- Certification(s): CE0120, EN 565, UIAA.
- Wide: 15 mm.
- Weight per metre: 27 g.
- Static strength: 1500 daN.
- Strength with water knot 2000 daN
- Sold by the meter
- Purple colour only
- contact pete@accessgear.net
Beal Dyneema webbing is amazing. With a huge advantage over traditional webbing for abrasion resistance and knotability when wet this is very useful stuff. I also have a personal belief that this may well be a lot better in UV exposure – Yet to see proof yet though!! Tying 2 x hangers together as a belay station is easier and much better than with traditional 15mm Nylon webbing.
Access Gear Mesh rope bag 60m/9mm (with flotation)
- Mesh rope bag 60m/9mm
- Sharp new design!
- Takes 50m of 10mm rope or 60m of 9mm easily
- Fits into Access Gear Canyoning bags
- Bright Green Pink or Burnt Orange
- Strong shoulder straps
- Stainless steel eyelets
- Draw cord
- Tie off points inside
- 400mm x 260mm
- Great canyon rigging/rope bag
- 2 x strong handles
- Use as a Super light weight canyon bag.
- Floatation inside – works for most rope, test yours first!
- Bag stands up for flaking rope.
- Overseas orders pete@accessgear.net
If you need a bag that speeds up your canyoning descent this will do the trick. By keeping the rope separate, this bag will allow you to keep rigging efficiently and work as a team. The new design fits into your canyoning bag better than the previous round shape, it also has shoulder straps now! Floating/non-floating options; with/without straps contact for orders!
Beal Dyneema cord 5mm
- Beal Dyneema cord 5mm
- Beal brand – Not to be confused with inferior products – this is 100% Dyneema
- Very high abrasion resistance
- Incredibly strong and lightweight
- 1200 daN (kgs) Breaking strength in a single strand
- 1500 daN (kgs) Breaking strength in a loop (with triple fishermans)
- 15g p/m
- Certified consistancy – CE UIAA
- Sold by the meter or contact for spool price
- pete@accessgear.net
Use a triple fishermans with this slippery but incredibly strong resiliant product.
Raumer hammer hex convertion
- Converts 13mm (8mm bolt) to 17mm (10mm bolt) hex
- Fits on the Raumer hammer
- Alan key fitting 2 mm hexagonal key with chrome vanadium
- The adaptor is extremely easy to install, using all the tools provided in the kit:
Maillon Rapide Peguet oval 7mm PPE (Stainless steel)
- Genuine Maillon Rapides made in France
- 8mm PPE
- Stainless Steel
- Good for connecting to hangers etc
- B/L 45 kN
- UIAA Certified
- PPE carry individual numbers on each piece.https://accessgear.net/wp-content/uploads/2020/08/Peuget-Maillon-Rapides-PPE-2.pdf
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Access Gear Mesh rope bag 30m (With flotation)
- Access Gear Mesh rope bag 30m (With flotation)
- Sharp new design! .
- Takes 30m of 10mm rope or 40m of 9mm easily
- Fits into Access Gear Canyoning bags
- Bright Green or vivid Blue
- Stainless steel eyelets
- Draw cord
- Tie off points inside
- Great canyon rigging/rope bag
- 2 x hanging handles ( no shoulder straps on this one)
- Floatation inside – works for most rope, test yours first!
- Bag stands up for flaking rope.
- Overseas orders pete@accessgear.net
If you need a bag that speeds up your canyoning descent this will do the trick. By keeping the rope separate this bag will allow you to keep rigging efficiently and work as a team. The new design fits into your canyoning bag better than the previous round shape.
Maillon Rapide Peguet screwlink wide 7mm (PPE) Steel
- 7mm Wide (PPE)
- Zinc plated Steel
- 35 grams
- B/L 25kN
- The quality brand Peguet
- UIAA Certified
- PPE carry individual numbers on each piece. https://accessgear.net/wp-content/uploads/2020/08/Peuget-Maillon-Rapides-PPE-2.pdf
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Maillon Rapide Peguet oval 8mm PPE (Stainless steel)
- Genuine Maillon Rapides made in France
- 8mm PPE
- Stainless Steel
- Good for connecting to hangers etc
- B/L 55 kN
- UIAA Certified
- PPE carry individual numbers on each piece. https://accessgear.net/wp-content/uploads/2020/08/Peuget-Maillon-Rapides-PPE-2.pdf
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Access Gear Mesh Expedition Bag (Updated 3/12/18)
- Access Gear Mesh Expedition Bag
- Better than ever
- These have been used for 9 years across New Zealand’s wild canyons.
- Hardest wearing mesh available
- Sits flat on your back unlike a sack!
- Hardest wearing material on Base area for the ultimate wear resistance.
- Handle on front
- Colours available on request.
- Padded Shoulder straps
- Padded Waist band
- Hanging loops inside and outside of lid
- Internal floatation
- Hard Wearing Mesh on back of bag
- Zipped Lid with mesh for drainage
- Stainless Steel eylets
- 4 Internal Loops
- Extra pocket inside/Rope Store, floatation etc
- 700 mm (h) x 450 mm (w)
- 50 litres approx + 5 litres in lid
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
- Made in New Zealand by us
- Why compromise.
- Review Here
- Purpose made for canyoning.
The first all mesh bag available that we know of – since 2013. With all this mesh, this bag is free draining to say the least! Contact us for available colours. Tried and tested design throughout New Zealand’s wild canyons Simply the highest draining canyoning bag. Ask anyone who owns one about the quality of these. Made for canyoning!
Bolting hammer (Raumer)
- Bolting hammer (Raumer)
- Used for bolting of Climbs Caves or canyons
- Pitch rigging
- Beautifully crafted nicely balanced solid hammer
- Rubber handle
- Stainless steel shaft with 3mm cord 1.5 m long as leash
- Weight: 600 grams
- Length: 26 cm
- Well balanced
- https://www.youtube.com/watch?v=vScT05QfSUY
- 2 x Hex head fittings 13mm plus with the possibility of an 17mm adaptor for bottom hex (extra $22) see above https://accessgear.net/products-page/extras/raumer-hammer-hex-convertion/
A superb bolting hammer with an 8mm nut key and additional 10mm as an option!
Access Gear Expedition Canyoning Bag 2 (Updated 3/12/18)
- Access Gear Expedition Canyoning Bag 2
- Updated and better than ever.
- Lighter in weight but just as tough!
- Simply the toughest bag available.
- Fully tested throughout NZ for over 9 years!
- Handle on front
- Red Or Yellow or Blue
- Padded Shoulder straps
- Padded Waist band
- Hanging loops inside and out of lid
- Internal floatation
- Hardest Wearing Mesh ever
- Zipped Lid with mesh for drainage
- Extra piping for strength on bottom
- Stainless Steel eyelets
- 4 Internal Loops
- Extra pocket inside/Rope Store, more flotation etc
- 700 mm (h) x 450 mm (w)
- 45 litres approx + 5 litres in lid
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
- Made in by us in New Zealand
- The original bomb proof canyoning bag that lasts, tried and tested for over 7 years.
- Superb quality, why compromise?
- From the grass roots of NZ canyoning
- Review here
This bag has all of the extras that you have asked for – Extra loops inside – there are now four. A new heavy duty grab handle on the front of the bag. Made from the best hard wearing material available. Not justa sack on ya back! Made for one purpose – CANYONING!
Raumer Stainless Steel RING Ø10mm
- Raumer Stainless Steel RING Ø10mm
- Abseil ring Stainless steel AISI 316L ring
- Welded with TIG (Tungsten Inert Gas)
- Inner diameter = 32 mm.
- Cost effective option other than a Stainless Steel maillon.
- Tie on rope or webbing for descending.
- Weight = 82 gr
- R = 40 KN
- 10mm for frequently visited canyons/caves because its super hard wearing.
- Overseas orders contact pete@accessgear.net
Maillon Rapide Peguet oval 8mm PPE (Steel)
- Genuine Maillon Rapides made in France
- 8mm PPE
- Zinc plated Steel
- Good for connecting to hangers etc
- BL 35 kN
- UIAA Certified
- PPE carry individual numbers on each piece. https://accessgear.net/wp-content/uploads/2020/08/Peuget-Maillon-Rapides-PPE-2.pdf
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Raumer Stainless Steel RING Ø8mm
- Raumer Stainless Steel RING Ø8mm
- Stainless steel Ø8 mm AISI 316L ring
- Welded using TIG (Tungsten Inert Gas)
- Internal diameter of 23mm.
- Smooth and polished
- Weight: 40 gr
- R= 30 kN
- Makes for an easy clean rope pull down!
- 8mm for infrequently visited canyons/caves
Useful for decsending canyons and caves if threaded onto rope or rated webbing. Makes for an easy clean rope pull down Cheaper option than stainless steel maillons! 316L SS
Maillon Rapide Peguet Steel wide 8mm PPE
- Genuine Maillon Rapides made in France
- Steel
- Good for connecting to hangers etc
- Wide mouth is more versatile
- Rated 33 kN
- 8mm PPE
- Good for connecting to hangers etc
- UIAA Certified
- PPE carry individual numbers on each piece. https://accessgear.net/wp-content/uploads/2020/08/Peuget-Maillon-Rapides-PPE-2.pdf
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Arborists Pod Mesh bag
- Arborists Pod Mesh bag
- Very well tested bag
- Very tough
- Original Access Gear idea/model now remade because of demand.
- 430mm x 250mm Handles your 60m line with ease.
- Super tough mesh on bottom section
- Shoulder straps – adjustable
- Corded Hood on top to stop debris etc.
- Tough quality you can rely on.
- Orange, Yellow or Red if available!
- The original – Don’t accept copies, this is it!
Made to last, some of our original models are out there from well over 10 years, still going hard out. - Contact pete@accessgear.net
The original – Don’t accept copies, this is it! Made to last, some of our original models are out there from well over 10 years, still going hard out.
QUICK LINK STAINLESS 8mm (Certified)
- 8 mm
- 76 g, 2.7 oz
- For FIXED ANCHORS, INDUSTRIAL, RIGGING
- CE certified stainless steel oval quick links for setting up rappels, equipping anchors and fixing quickdraws.
- The 8 mm requires a 14 mm open-end wrench.
- Gate opening 11.5mm
- Height 74mm
- Width 39mm
- Strength – Major 50kN
- Strength -Minor 10kN
- UIAA
MINI CANYONING rope bag
- Takes 30m of 8.5mm rope Or pull cord bag 60m+
- Based on our other quality rope bag
- 2 x Red loops inside for tying rope off.
- Fast draining
- Genuinely well made and very tough! Can be made from even more robust materials to order.
- Single loop for clipping to carabiner
- floatation inside (other options available for lighter weight)
- Handles 60m+ of 6mm pull cord – depending on the stiffness of your cord it will take lots more.
- Eyelet in bottom
- Closes tightly with eyelets and cord. No added hood to get in the way when flaking your rope.
- Red is standard.
Size H310mm x W220mm x D150mm
Contact pete@accessgear.net
Another well thought out very tough bag. Based on our other rope bags with the best materials that have been well tested for years. Floatation is standard, but is up to you – Please ask if you require non floating bags. Made to order. Used in canyons for rope management the simple single loop is all that you need to clip on to your harness. Other uses include SAR, arborists, riggers etc, anyone who need a tough free draining small bag.
13mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 13mm spanner
- Fits 8mm bolts
- Weight: 60 gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down.
A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Bolting bag/Surveying bag
- Bolting bag/Surveying bag
- Velcro and buckle closure (no loss of equipment)
- Loops inside for bolts
- Internal elastic loop for hammer
- Hammer kept inside of bag (Hammer not included)
- Drill bit compartment – takes 200mm+ long drill bits!
- Adjustable shoulder strap with stainless steel buckle
- Belt loop to clip on harness
- 25cm x 25cm x 7cm approximately. (not too big, not too small)
- Other specific options (just ask)
- Makes a perfect surveying bag or bolting bag
- Mesh option for canyon bolting!! (Another first from Access Gear we believe)
- Colour options on request.
- Contact pete@accessgear.net
After using various methods/bags/pockets etc for bolting in caves and canyons, we have put all these ideas together to make a specific bag that really is designed for purpose. Not too big, not too small, with velcro and buckle closure, it holds your gear where you need it, inside the bag! This bag doubles as a perfect surveying bag – material options available to suit your needs. We generally use heavy duty materials due to its contents for bolting, but surveyors will be happy with a lighter weight version. Let us know what you want, we will make a bag to suit your job!
Camp QUICK LINK STAINLESS STEEL 10mm
- Camp
- STAINLESS STEEL QUICK LINK 10mm
- 138gm
- For FIXED ANCHORS, INDUSTRIAL, RIGGING
- CE certified stainless steel oval quick links for setting up rappels, equipping anchors and fixing quickdraws.
- The 10mm requires a 17 mm open-end wrench.
- Gate opening 13mm
- Height 89mm
- Width 47mm
- Strength – Major 55kN
- Strength -Minor 10kN
- UIAA
- How strong are these Camp Quicklinks https://www.youtube.com/watch?v=h7rg20Fy4cc
Camp QUICK LINK STAINLESS STEEL 10mm Oval quick links for high strength fixed connections. Manufactured from stainless steel for outdoor installations or corrosive environments. Available in two sizes: 8 mm (requires 14 mm open-end wrench) or 10 mm (requires 17 mm open-end wrench).
17mm Ring Spanner with cord attached
- 17mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 17mm spanner
- Fits 10mm bolts
- Weight: 120gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down.
A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Access Gear Shopping bag (super heavy duty)
- Super strong shopping bag/beach bag
- Made to last and last (We have our original- 9 years and it is in perfect nick!)
- Another Access Gear original
- Handles a day at the beach or market, beer or potatoes etc…..
- Washable
- 350mm x 320mmx 210mmWe have our original from 8 years and it is still in perfect nick!
- Colours possible Red, Yellow, Blue Orange etc,
- White mesh or Black mesh possible please ask.
- As an option I have been ask to add flotation – Must be a wet day!! 🙂
Maillon Rapide D shape steel
- Genuine Maillon Rapides made in France
- 10mm
- Steel
- Good for connecting all you gear on your harness
- Rated 45 kn
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Central focus point. For connecting all your gear for caving harnesess
Access Gear Double ended rope bag
- Access Gear Double ended rope bag
- UPDATED 11/22
- Mesh bag for massive drainage
- Simple shoulder straps/flip straps
- Strong Hanging loops either end of bag
- Bag can be flipped for access to other end of rope for speedy use.
- Fits 60m of 9mm easily or 60m x 10mm at a push
- Fits perfectly into an Access Gear canyoning bag – Floatation now included!
- https://accessgear.net/products-page/bags-and-extras/canyoning-pack-extreme-2-new-11012/
- Other sizes made to order – just ask
A simple well made bag, with 2 x ends for speedy access to your rope!! Massive drainage to avoid carrying weight of water. 🙂
19mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 19mm spanner
- Fits 12mm bolts
- Weight: 115 gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down
A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Wetsuit protection (Bum Protector)
- Made by us in NZ
- Protection when sliding whilst canyoning
- Saves wetsuit damage
- 25mm join for longer lasting
- Heavy duty fabric
- Will fit harnesses up to 60mm webbing.
- Welded for strength!
- A must for every canyoner
- Updated now 15/10/19
- This fits very well – no flappy bits!
- 2 sizes available s/m or m/l
Contact pete@accessgear.net with any questions
Petzl Connect Adjust
- Petzl Connect Adjust
- Length: 15 – 95 cm
- Weight: 125 g
- Certification(s): CE, UIAA 109
- Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
- Single positioning lanyard with adjustable arm
- The ADJUST rope adjuster’s ergonomic shape offers quick, precise adjustment
- Lanyard adjusts from 15 to 95 cm
- The connector is held in position by a rubber ring, to facilitate clipping
- Dynamic rope lanyard
- More info – https://www.petzl.com/INT/en/Sport/Lanyards/CONNECT-ADJUST
to reduce the force transmitted to the user in the event of a short fall (1) Used with a locking carabiner Attaches to the belay loop of the harness with a girth hitch (1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
Access Gear – Load release system ( Not PPE)
- Access Gear – Load release system
- Release a test load smoothly, and simply.
- No cutting!
- Release with a pull cord at a safe distance
- Can be used as a swing release (needs understanding)
- Re use time and time again
- Not PPE
- Handles a couple of kN with ease
- Made by Access Gear in New Zealand
- Carabiners not included
- Colours vary.
- Contact pete@accessgear.net
A classic way to release a weight with smooth accuracy – No cutting needed.
Petzl Paw
- Petzl Paw
- For easily organizing the work station and creating multi-anchor systems
- 19 mm holes allow the locking sleeves of most carabiners to pass through
- made of forged aluminum for an excellent strength-to-weight ratio
- durable markings, thanks to the recessed area in the center of the plate
- Available in Gold
- Material(s): aluminum
- Breaking strength: 36 kN
- Certification(s): CE, NFPA 1983 General Use
- OVERSEAS ORDERS OR BANK DEPOSITS –
- PLEASE ENQUIRECLICK HERE
Swing (Camp) lanyard personal anchor
- Adjustable positioning lanyard for attaching to anchors
- Ergonomic adjuster for quick and easy adjustment
- Unique design allows adjustment even under load
- 9.7 mm dynamic rope lanyard
- Adjustable from 20-100 cm
- Large connection hole accommodates all sizes of locking carabiners
- Attaches to the tie-in point of the harness with a girth hitch
- Weight: 145g
- CE 0123 UIAA
- Rope diameter: 9.7mm
- Use any carabiner you like!
- https://www.youtube.com/watch?v=PAf3VTHY0hs
- SOLD OUT!
Adjustable lanyard for quick, easy and safe positioning at anchors. The lanyard remains girth hitched to the tie-in point of the harness and attaches to the anchor using a standard locking carabiner. Once connected, simply pull on the free end of the lanyard to tension into the anchor or hold the device open with the thumb lever to release tension. 9.7 mm dynamic rope. Adjustable from 20 – 100 cm.
Polyglut (wetsuit repair and seamsealer)
- Wetsuit seam sealer and coating for wear resistance
- Use on Neoprene or Nylon
- Seam seal caving overalls
- For knee protection, build up three layers for robust protection
- Designed to reinforce and protect knees, elbows and sewing lines
- 100ml
MULTIANCHOR Rigging plate (Camp)
- MULTIANCHOR Rigging plate (Camp)
- Strong aluminum alloy plate with 5 holes.
- Orange
- Dimensions: 93 x 72 x 8mm
- Holes: 5 x 19mm
- Strength: 30kN
- Weight: 70g
Fenix HM65R
- Fenix HM65R
- Amazing value for powerful headlamp or back up caving lamp
- Independant Spot and floodlight by way of two easy to operate buttons
- Cree XM-L2 U2 white, XP-G2 R5 neutral white LED, with a lifespan of 50,000 hours.
- Powered by one 18650 (Supplied) rechargeable Li-ion battery or two 3V/CR123A batteries
- Constant current circuit guarantees longer runtime
- Dual top switches for easy and fast operation
- USB Type-C charging, 1.5A large current
- Quality aluminum, magnesium and PC material, lightweight and durable
- Waterproof IP68
- Toughened ultra-clear glass lens with an anti-reflective coating
- 3.17″ Length x 2.17″ Width x 1.57″ Height (80.5 x 55x 40 mm)
- 3.42 oz / 97 grams (excluding battery)
- Runtimes here – hm65r-spec-chart
- For runners look at the – https://accessgear.net/products-page/lamps-and-spares/fenix-headlamp-hm65r-t/
HM65R Weight: 3.4 oz. (97g) excluding battery HM65R Battery: One included 18650 rechargeable Li-ion battery or two CR123A batteries Included: ARB-L18-3500 rechargeable li-ion battery, headband, top headband, headband mount, spare O-ring, USB Type-C charging cable An Amazing headlamp with extremely bright leds. Camping, clamping, caving, climbing, this fits on a helmet or directly to your head. A must for adventureres.
Petzl Dual Connect Adjust
- Petzl Dual Connect Adjust
- An Adjustable double lanyard!
- Fixed arm length: 45 cm
- Adjustable arm length: 15 to 95 cm
- Weight: 160 g
- Certification(s): CE, UIAA 109
- Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
- Contact pete@accessgear.net
Adjustable double lanyard allows users to tether themselves to an anchor and install a rappel system in multi-pitch climbing and mountaineering Double lanyard with one fixed arm and one adjustable arm: – 45 cm fixed arm – 15 to 95 cm adjustable arm – the ADJUST rope adjuster’s ergonomics make it easy to manipulate, for quick and precise adjustment of the adjustable arm – dynamic rope lanyard, to reduce the force transmitted to the user in the event of a short fall (1) Easy to use: – the connector is held in position by a rubber ring, to facilitate clipping – one-handed adjustment – used with two SPIRIT SCREW-LOCK-type locking carabiners – attaches to the belay loop with a simple girth hitch (1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
Buckle 25mm Stainless Steel
- Stainless Steel
- Great for small projects
- Small hole for cord etc.
- Make your own adjustable 25mm webbing straps.
- Webbing also available on request just ask
- A quality product
We encourage you to make something. If you can’t buy it make it yourself!!
Battery (2 Cell)
…For Scurion Lamps. We only use best quality, highest available capacity cells from top brands like Panasonic, Sanyo or Samsung. All battery packs contain a protection circuitry that ensures safe operation.
This makes sense for short trips, if you don’t need the full capacity of the four cell pack and if you want to reduce the weight.
OVERSEAS ORDERS OR BANK DEPOSITS – PLEASE ENQUIRE – CLICK HERE
Scurion® Module battery
- New battery module for ‘basic’ models and Scurion Dive only.
- 6.8Ah Panasonic batteries 49Wh
- 20 -40% extra runtimes
OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE All prices include NZ tax at 15%
Our lamps are optimized for efficiency. LEDs, converter electronics, batteries, optical and thermal concept, even the cabling is fine-tuned to get the maximum amount of light from one battery charge. When not running on full power all the time, one 4-cell battery pack can last for days. Boost mode? For a few minutes? – Not with a Scurion®! Our lamps have a very effective heatsink and temparature control – Just use them on full power when you want and as long as you want!
AV Fornocal trousers ( Canyoning or Caving)
- AV Fornocal trousers
- Complement to the Taka canyoning jacket
- Use this combination for caving, canyoning.
- Great for prospecting for caves
- Polyamide coated trousers for protection of the neoprene canyoning suit.
- Buttock reinforcement without central stitching, + knee reinforcement.
- Velcro fastening with nylon clip together belt to hold ya pants up!
- Wear resistant material (used for caving suits)
- Sizing available S/M/L
- Weight 600 g
- Blue/Black
Whilst wondering around in the bush its a great thing to be wearing a pair of resistant trousers that you can also use for caving + canyoning – Sorta makes sense really. These compliment the Taka jacket.
Blade Mount
…For Scurion lamps. Designed to fit onto traditional lamp holders.
OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
9V Adaptor
…For Scurion lamps. Made to run your lamp on the lower settings.
This is a simple backup power lead for your lamp, just add one 9v battery .
OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Scurion® Dive Lamp
- Scurion® Dive Lamp
- Helmet lamp, light output 1500 lm max
- Battery capacity: 4-cell li-ion module, 7.2 V, 5.2 Ah, 37 Wh
- Depth rating: – NOW –150m !
- Lamp head: 166 g, Battery case: 290 g, Battery module 205 g
- Material: Aluminium, black anodized
- Color temperature: 6000K or 3000K
- Spot: Half angle 6.5° + room light (lambert distribution, half angle 60°)
- This lamp comes with 1 x 4 cell battery
- Individually tested
- Note – Colour options are now an extra $35
OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE CLICK HERE All prices include NZ tax at 15%
What’s different with the Scurion® dive lamp – Comfort – No delay due to lamp change before and after diving a sump. – No overheating problems outside of the water. – The weight of the lamp on the helmet is no issue outside of the water. Brightness – We provide the most up-to-date LED technology. Flexible, individually programmable light distribution Maxiumum run time, as every component from LED to cable is tuned for maximum efficiency
Scurion 700
- Scurion 700
- Genuine measure of light output
- Waterproof IP 68
- Constant current regulated brightness (independent on battery voltage)
- Microprocessor control for Li-Ion power reduction
- Bar display for remaining battery capacity
- Transport lock
- Aluminium battery box
- fully programmable to user´s preferences
- completely nonmagnetic – no magnetic switch disturbing your compass
- 500 ANZI Lumen – 250 Lm spot and 250 Lm wide angle
- wide angle tilted by 15° downwards
- colour temperature ~6000 Kelvin – nice, pure white!
- This lamp comes with one four cell battery 6.8Ah!
- Note – Colour options are now an extra $35
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE All prices include NZ tax at 15%
Scurion lamps are made in Switzerland, sold throughout New Zealand and Australia and used throughout the world. Quality, consistency, reliability and great service. The favourite of speleologists. Why compromise with your primary piece of caving equipment?
Scurion® 700 ‘basic’
- Scurion® 700 ‘basic’
- Genuine measure of light output
- Waterproof IP 67 – 1m ( Not for diving)
- Constant current regulated brightness (independent on battery voltage)
- Microprocessor control for Li-Ion power reduction
- Bar display for remaining battery capacity
- Transport lock
- Engineered plastic battery case
- Battery module
- Fully programmable to user´s preferences
- Completely nonmagnetic – no magnetic switch disturbing your compass
- 500 ANZI Lumen – 250 Lm spot and 250 Lm wide angle
- Wide angle tilted by 15° downwards
- Colour temperature ~6000 Kelvin – nice, pure white!
- This lamp comes with one four cell battery
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE All prices include NZ tax at 15%
You can program the settings of your lamp to any combination of spot and wide angle LED. This table shows the resulting run times. Assuming you have the spot on setting 4 and wide angle is off, you get 10.3h. Using the wide angle on setting 3 and spot on 2, the lamp will work for 21h.
Scurion®900
- Scurion®900
- Genuine measure of light output
- rugged, waterproof aluminium cases:
The battery case is machined from a solid block of aircraft grade aluminium: It is lightweight, yet strong as steel. The battery case lid has an o-ring seal, making it watertight. - constant current regulated brightness (independent on battery voltage)
- microprocessor control for Li-Ion power reduction
- bar display for remaining battery capacity
- fully programmable to user´s preferences
- optional UV-LED and projector for bar display
- completely nonmagnetic – no magnetic switch disturbing your compass
- new: 800 ANZI Lumen – 220 Lm spot and 550 Lm wide angle
- new: wide angle tilted by 15° downwards
- colour temperature ~6000 Kelvin – nice, pure white!
- this lamp comes with one four cell battery
- Note – Colour options are now an extra $35
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE All prices include NZ tax at 15%
Scurion lamps are made in Switzerland, sold throughout New Zealand and Australia and used throughout the world. Quality, consistency, reliability and great service. The favourite of speleologists. Why compromise with your primary piece of caving equipment?
Scurion®1500+warm-white option
- Scurion®1500+warm-white option
- High CRI ‘Warm White
- Genuine measure of light output tested
- rugged, waterproof aluminium cases:
The battery case is machined from a solid block of aircraft grade aluminium: It is lightweight, yet strong as steel. The battery case lid has an o-ring seal, making it watertight. - constant current regulated brightness (independent on battery voltage)
- microprocessor control for Li-Ion power reduction
- bar display for remaining battery capacity
- fully programmable to user´s preferences
- completely nonmagnetic – no magnetic switch disturbing your compass
- 840 ANZI Lumen – spot and wide angle each 420 Lm
- new: wide angle tilted by 15° downwards
- Nice warm white
- this lamp comes with 1 x 4 cell batteries
- Note – Colour options are now an extra $35
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE All prices include NZ tax at 15%
Scurion lamps are made in Switzerland, sold throughout New Zealand and Australia and used throughout the world. Quality, consistency, reliability and great service. The favourite of speleologists. Why compromise with your primary piece of caving equipment?
Scurion 1500
- Scurion 1500
- Made in Switzerland
- A genuine measure of light output!
- rugged, waterproof aluminium cases:
The battery case is machined from a solid block of aircraft grade aluminium: It is lightweight, yet strong as steel. The battery case lid has an o-ring seal, making it watertight. - constant current regulated brightness (independent on battery voltage)
- microprocessor control for Li-Ion power reduction
- bar display for remaining battery capacity
- fully programmable to user´s preferences
- completely nonmagnetic – no magnetic switch disturbing your compass
- new: 1300 ANZI Lumen – spot and wide angle each 650 Lm
- wide angle tilted by 15° downwards
- colour temperature ~6000 Kelvin – nice, pure white!
- this lamp comes with 1 x 4 cell battery
- Note – Colour options are now an extra $35
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE CLICK HERE All prices include NZ tax at 15%
- More info here – https://www.scurion.ch/jm19/en/lamps.html
Scurion lamps are made in Switzerland, sold throughout New Zealand and Australia and used throughout the world. Quality, consistency, reliability and great service. The favourite of speleologists. Why compromise with your primary piece of caving equipment?