Petzl Pirana Guide
- Petzl Pirana Guide
- The Petzl Pirana guide is an adjustable friction descender with spur and locking loop for canyoning intended for independent users and guides. It has three rope installation options and allows the degree of friction to be adjusted before starting the descent. A friction spur allows for increased braking power during the descent. The plastic ring keeps the connector in the correct position to facilitate rope installation while the device is attached to the harness, limiting the risk of the device falling.
- Material(s): Aluminum frame, thermoplastic elastomer (TPE) positioning ring
Weight: 110 g
Rope compatibility: 8 to 13 mm - Contact –
pete@accessgear.net
Nano Traxion
Nano Traxion the smaller version of the Micro Traxion
- Weight: 53 g
- Certification(s): CE EN 567, UIAA
- Min. rope diameter: 7 mm
- Max. rope diameter: 11 mm
- Sheave type: sealed ball bearings
- Sheave diameter: 18 mm
- Breaking strength: 2 x 7,5 = 15 kN
- Breaking strength as progress capture pulley: 4 kN
- Efficiency: 91 %
- Review here https://www.youtube.com/watch?v=-uNrvrC-_k4&t=910s
More Details
Ultra-light and compact: – only 53 g – very compact – hole allows a Sm’D carabiner to be connected to the pulley with a cord, making the device loss-proof Designed for rescue High efficiency: – sealed ball bearings provide excellent efficiency (91 %) – locks even on frozen or muddy ropes – for use on 7 to 11 mm diameter ropes – rope installation diagrams engraved inside pulley
Petzl COEUR PULSE 12mm
- Petzl Coeur Pulse
- Material(s): 316L stainless steel
- Certification(s): CE EN 795 B
- Reusable
- 12mm x 60mm
- Easy to use:
– simple, rapid installation and removal, without tools, allowing it to be reused
– locking function limits the risk of involuntary removal - Easy clipping:
– the wide, ergonomic connection hole facilitates carabiner clipping
– the width of the hole allows installation of two carabiners at the same time - Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection holeNB : For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges
-
Contact pete@accessgear.net
More Details
– simple, rapid installation and removal, without tools, allowing it to be reused (1) – locking function limits the risk of involuntary removal Easy clipping: – the wide, ergonomic connection hole facilitates carabiner clipping – the width of the hole allows installation of two carabiners at the same time Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection hole Hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use (1) For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges.
Petzl Fractio caving harness (Size 2)
- Adjustable double waistbelt
- Very comfortable
- Leg loops reinforced with TPU for greater resistance to abrasion
- Two Dyneema® equipment loops are extremely durable
- High-strength polyester webbing for excellent durability
- Extensive adjustment options provided by the double waistbelt and leg loops, to fit a wide range of users
- Aluminum attachment points facilitate installation of the ventral connector and extend harness life
- Rear buckle with wear protector webbing flap
- SOLD OUT –
More Details
A very comfortable harness for caving due to its double waist band. Very simple to use. Hard wearing for a hard wearing environment.
Petzl ST Anneau sling 60cm
- Petzl ST Anneau sling 60cm
- A lighter alternative to the all-nylon slings, these are color coded yellow
- Lighter and more flexible than nylon slings
- Very abrasion resistant
- Width: 12 mm
- Strength: 22 kN
- Certification(s): CE, UIAA
Petzl Oscillante
- Material(s): aluminum side plates, nylon sheave
- Certification(s): CE EN 12278, UIAA
- Weight 42 g
- 7mm-11mm
- 71% Efficiency
- Working load 4kN 2 strands 2 kN one Strand
- Breaking Load 15kN
- Aditional info and overseas orders pete@accessgear.net
Petzl Mini prusik minding pulley
- Petzl Mini prusik-minding pulley.
- 25mm aluminium sheave, sealed ball bearings:
- Efficiency 91%.
- Ropes 7-11mm dia.
- WLL 5kN UIAA
- Breaking load 23kN
- 80g
- 7 < 11mm rope.
More Details
Special side plates designed for use with a Prusik friction hitch in progress capture systems Sheave mounted on sealed ball bearings for excellent efficiency Compact and lightweight
Petzl Superavanti (New 2021)
- Reinforced for durability:
– leg loops reinforced with thermoplastic polyurethane (TPU) for greater resistance to abrasion
– gear loops in extremely durable high-modulus polyethylene (HMPE)
– high-strength polyester webbing retains smooth adjustment qualities over time
– attachment points entirely reinforced in high-modulus polyethylene (HMPE), for great durability
– rear buckle with wear protector webbing flap - Efficient rope ascents:
– rope ascent efficiency is optimized, thanks to the lower position of the attachment points
– two gear loops on each side, for transport and organization of gear - Adapts to any body type:
– comes in two sizes, allowing you to switch from a children’s size to an adult size
– extensive waistbelt and leg loop adjustment options to fit a wide range of users
– differently colored safety stitching, for quick identification of harness size (yellow stitching for Size 1, black stitching for Size 2) - SIZING BELOW or contact pete@accessgear.net
More Details
Color(s) orange/black orange/black Size 1 2 Waist belt 60-95 cm 90-105 cm Leg loops 42-62 cm 52-72 cm Weight 410 g 450 g
Petzl STRATO® VENT
- Petzl STRATO® VENT
- Lightweight and comfortable design:
two-part liner, EPP
-CENTERFIT feature allows perfect centering of the helmet on the head, thanks to its two side adjustment wheels
FLIP&FIT system allows the headband to be positioned in a low position, guaranteeing that the helmet fits securely on the head. - The system folds into the shell for easy storage and transportation
– comes with changeable absorbent comfort foam - Protection designed for work at height and on the ground:
(EN 12492) or on the ground (EN 397).
– shock absorption achieved through deformation of the liner
– ventilation holes allow airflow through the helmet - available in four colors: white, yellow, red and black
- Overseas or inquiries Here
- Head circumference: 53-63 cm
- Weight: 415 g
- Certification CE, EN 12492, ANSI Z89.1 Type I Class C
More Details
The clip has two positions, corresponding to these two uses: high strength, limiting the risk of losing the helmet during a fall, and low strength, limiting the risk of strangulation if the helmet is snagged while the user is on the ground – shock absorption achieved through deformation of the liner – ventilation holes allow airflow through the helmet available in four colors: white, yellow, red and black Material(s): ABS (acrylonitrile butadiene styrene), EPP (expanded polypropylene), EPS (expanded polystyrene), nylon, polycarbonate, high-strength polyester, polyethylene
Petzl Partner (pulley)
- Petzl Partner (pulley)
- Extremely lightweight and ultra-compact pulley
- Quick and easy installation due to the swinging side plates
- Sheave mounted on sealed ball bearings for excellent efficiency
- Material(s): aluminum side plates, aluminum sheave
- Certification(s): CE EN 12278, UIAA
- Weight 56g
- 7mm – 11mm
- Efficiency 91%
- Working load 5kN
- Breaking Load 15kN
- Contact pete@accessgear.net
Petzl Boreo Helmet
- Petzl Boreo Helmet
- Rugged:
– hard outer shell is impact and scratch resistant for optimal durability
– hybrid construction with thick ABS shell, an EPP foam liner and an EPS foam liner makes it compact on the head
– soft headband conforms perfectly to the shape of the head and folds into the shell for storage and transportation - Head-covering design for optimal protection against lateral, front and rear impact:
– carries Petzl’s TOP AND SIDE PROTECTION product label
– head-covering shape, lower in the rear, offers reinforced protection - Versatile, for a variety of activities:
– suitable for , caving, canyoning, climbing, mountaineering, via ferrata,
– four clips for headlamp attachment - Material(s): ABS shell, expanded polypropylene (EPP) liner, expanded polystyrene (EPS) liner, polyester webbing
- Red, Blue, Green,White when available. Please Ask
- Certification(s): CE EN 12492, UIAA
- 48-58 cm S-M
- 53-61 cm M-L
- SOLD OUT!
Petzl PULSE 8mm
- Petzl PULSE 8mm
- Caving anchor.
- Quick to use:
- Material(s): stainless steel, aluminum
- Certification(s): CE EN 795 B
- Drilling diameter 8mm
- Drilling depth 5 cm
- instantly placed by activating the release plunger
- anchor is completely removed by pressing on the release plunger and pulling on the hanger
- easy to install and remove
– locking wrench for extended use or use with groups
– twisted hanger designed to hold the connector parallel to the wall
– interchangeable hanger - More responsible equipment practice for caving:
– the anchor does not rust underground
– the condition of the anchor can be checked - https://www.petzl.com/INT/en/Sport/Anchors/PULSE
Petzl Spatha ( Knife)
- Petzl Spatha
- Smooth/serrated combo blade easily cuts ropes and cordage
- Hole for attaching the knife to the harness a carabiner
- Notch in the blade for opening the knife with bare hands
- Textured wheel for opening the blade when wearing gloves
- Mechanism for locking the blade in the open position
- Stainless steel blade for improved durability
- 43g
- in Yellow or Blue where available!
More Details
The SPATHA clippable knife is designed to accompany the caver canyoner or climber on every outing. The profile of the blade allows easy cutting of ropes and cordage. It has a carabiner hole for attaching the knife to the harness. It is easy to manipulate with its textured wheel, even when wearing gloves, and can be locked in the open position.
Croll L (Large)
- Croll L (Large)
- Material(s): aluminum frame, stainless steel cam, nylon safety catch
- Weight: 140 g
- Efficiency optimized for wide-diameter ropes:
- Rope compatibility: 8 to 13 mm
- Certification(s): CE EN 567, UIAA
- Weight: 140 g
- The Croll for larger ropes is back!
- Contact pete@accessgear.net
Petzl Rollclip Z
- Petzl Rollclip Z
- Material(s): aluminum
- Min. rope diameter: 7 mm
- Max. rope diameter: 13 mm
- Sheave diameter: 18 mm
- Maximum working load: 2 x 2 = 4 kN
- Efficiency: 85 %
- Major axis strength: 20 kN
- Minor axis strength: 8 kN
- Open gate strength: 7 kN
- A really nice piece of kit!
More Details
Easier handling: – sheave mounted on sealed ball bearings for excellent efficiency – gate opening on the non-pulley side, to facilitate installation on devices – Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place H cross-section of carabiner: – ensures an improved strength-to-weight ratio – protects markings from abrasion – SCREW-LOCK: the manual screw-lock with red band provides a visual warning when the carabiner is unlocked
Petzl Huit
Petzl Huit
- Square shape helps reduce rope twist and girth hitch formation
- Compact and lightweight
- Small hole can be used with thin ropes if necessary, or as a belay plate
Material(s): aluminum- Weight: 100 g
- Rope compatibility: 8 to 13 mm (single and half ropes)
- https://www.petzl.com/INT/en/Professional/Descenders/HUIT
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Petzl Tibloc
- Petzl Tibloc
- Extremely compact and lightweight:
- An efficient piece of basic equipment
- Can be used as a progress capture device in a hauling system or for ascending ropes
- Material(s): stainless steel
- Weight: 35 g
- Rope compatibility: 8 to 11 mm
- Certification(s): CE EN 567, EAC
More Details
Material(s): Stainless steel Weight: 39 g Rope compatibility: 8 to 11 mm rope with a locking carabiner Certification(s): CE EN 567, UIAA
PETZL SHUNT
- PETZL SHUNT
- Easy to install on the rope
- Smooth clamping surfaces won’t damage rope
- May be used to ascend single or doubled rope
- Material(s): aluminum frame
- Weight: 188 g
- Rope compatibility: single ropes 10-11 mm or doubled ropes 8-11 mm
- Certification(s): CE EN 567, UIAA
Petzl St’Anneau Sling 120cm
- Petzl St’Anneau
- Useful 120cm length
- Made in France
- Red/white
- 22kN rated CE UIAA EN566
- Dynema 40g
- Nice and light weight!
Petzl Basic ascender
- Petzl Basic
- Material(s): aluminum frame, stainless steel for the cam, nylon for the trigger
- Weight: 85 g
- For use with single ropes between 8 and 11 mm
- Certification(s): CE EN 567, UIAA
- Made in: France
- Contact pete@accessgear.net
More Details
Compact ascender with excellent grip Can be used for rope ascent on a fixed line or as progress capture in a hauling system Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes) Stainless steel cam has better resistance to corrosion Lower attachment hole large enough for two carabiners (lanyard and foot loop) Upper connection hole for guiding the rope
Petzl Ascention ( Right hand ascender)
- Petzl Ascention
- Ascender for ascending rope.
- Material(s): aluminum, stainless steel, plastic, rubber, nylon
- Weight: 165 g
- Rope compatibility: 8 to 13 mm
- Certification(s): CE EN 567, UIAA
More Details
Designed for ascending a rope Simple to use, and effective: – ergonomic molded handle allows a comfortable yet powerful grip – wide opening allows the handle to be easily grasped, even with thick gloves. – ergonomic upper part to maximize power when pulling with two hands – safety catch is totally integrated into the body of the ascender to help prevent snagging – toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or dirty ropes…) – wide lower hole allows the carabiners of the CONNECT ADJUST lanyard and FOOTAPE or FOOTCORD footloop to be easily attached – upper hole for clipping a carabiner around the rope Available in left-handed and right-handed versions
Petzl Torse
- Petzl Torse
- Simple construction
- Rapid buckle facilitates placement and removal of the strap on the harness
- DoubleBack buckle for quick, precise adjustment
- Superior quality webbing for excellent durability
More Details
Specifications Material(s): aluminum DoubleBack adjustment buckle, plastic rear buckle, abrasion resistant polyester webbing References References C26 2 Weight 90 g Guarantee 3 years Packing 1
Petzl Croll S
- Petzl Croll S
- Smaller and lighter than the L model
- Stainless steel wear plate improves durability
- Catch is opened by pinching for simple quick manipulation
- Lower hole angled to keep the CROLL chest ascender flat
- Upper hole for attaching a chest strap to keep the rope clamp in position
- Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch
Weight: 85 g
Rope compatibility: 8 to 11 mm
Certification(s): CE EN 567, UIAA - Add one of these https://accessgear.net/products-page/caving-harnesses/av-speleoshoulder/
- Petzls website – https://www.petzl.com/INT/en/Sport/Ascenders/CROLL-S
- Contact here
More Details
Description Efficient and easy to use during rope ascents: – used with the BASIC ascender or the ASCENSION handled ascender for rope ascents – lower hole is angled to keep the chest ascender flat – upper hole for attaching a TORSE shoulder strap to keep the ascender in position – catch is opened by pinching, for simple, quick manipulation Reinforced for durability: – stainless steel wear plate for improved durability – stainless steel cam has better resistance to corrosion Adapted for intensive caving: – compatible with ropes measuring 8 to 11 mm in diameter – lightweight, only 85 g – toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes…) Specifications Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch Weight: 85 g Rope compatibility: 8 to 11 mm Certification(s): CE EN 567, UKCA, UIAA
Petzl Pantin ( Right foot ascender)
- Material(s): aluminum frame, stainless steel cam, nylon, Dyneema® straps
- Weight: 85 g
- Rope compatibility: 8 to 13 mm
- The PANTIN is not an item of PPE
More Details
Designed to make rope ascents more efficient and less tiring Cam facilitates rope glide on the first few meters Toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes…) Stainless steel cam has better resistance to corrosion Mechanism is totally integrated into the body of the ascender to help prevent snagging Releases from the rope with a simple backwards movement of the foot Foot strap is 100 % Dyneema® to resist abrasion Easy adjustment with DoubleBack buckle Comes in two versions: PANTIN right foot and PANTIN left foot
Petzl Spirit Screw – Lock
- Petzl Spirit Screw lock
- Carabiner optimized for lightness and durability
- very compact shape is ideal for belay stations
- H-shaped cross section offers an improved strength/weight ratio
- wider contact surfaces for better rope glide and reduced wear on the carabiner
- Easy to use, for efficient handling:
- SCREW-LOCK locking sleeve for good handling and effective locking
- Red visual indicator facilitates checking that the carabiner is locked
- nose and Keylock system helps avoid the carabiner snagging during maneuvers
- carabiner designed for better rope glide and to ensure good positioning of the belay device
- shape adapted for easy tying or untying of a clove hitch
- SOLD OUT
Petzl Omni Triact lock
- Petzl Omni Triact lock
- Multi-directional carabiner
- Fasten the harness by joining the two attachment points
- Used for connecting a CROLL ( chest ascender)
- Strength: 15 kN (in all directions)
- Keylock system helps prevent the carabiner snagging during manoeuvres
- TRIACT-LOCK: automatic locking with triple-action gate opening
PETZL MICRO TRAXION
PETZL MICRO TRAXION
- Ultra-light and ultra-compact progress capture pulley (volume and weight 50 % less than the MINI TRAXION)
- Sealed ball bearings provide excellent efficiency (91 %)
- Cam can be locked in open position so device can be used as a simple pulley. Works even on frozen or muddy ropes.
- For use on 8 – 11 mm diameter ropes
- Rope installation diagrams engraved inside pulley
- Designed for crevasse rescue, hauling, self-rescue and as an emergency ascender
Specifications
- Weight: 85 g
- Certification(s): CE EN 567, UIAA
- Min. rope diameter: 8 mm
- Max. rope diameter: 11 mm
- Sheave type: sealed ball bearings
- Sheave diameter: 25 mm
- Working load: 2 x 2.5 kN
- Breaking strength: 7,5 x 2 kN
- Working load as progress capture pulley: 2.5 kN
- Breaking strength as progress capture pulley: 4 kN
- Efficiency: 91 %
Petzl Attache
- Petzl Attache
- Carabiner optimized for lightness and durability:
- very compact shape is ideal for belay stations
- H-shaped cross section offers an improved strength/weight ratio
- wider contact surfaces for better rope glide and reduced wear on the carabiner
- Easy to use, for efficient handling:
- SCREW-LOCK locking sleeve for good handling and effective locking
- visual indicator facilitates checking that the carabiner is locked
- nose and Keylock system helps avoid the carabiner snagging during maneuvers
- carabiner designed for better rope glide and to ensure good positioning of the belay device
- shape adapted for easy tying or untying of a clove hitch
Petzl Foot Tape
- Petzl Foot Tape
- Attaches to the ASCENSION ascender for rope ascents
- Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into
- Adjustable elastic keeps feet in the loop with any type of shoe
- DoubleBack buckle easily and quickly adjusts length of foot loop
- Material(s): nylon, steel
- Weight: 65 g
Petzl Footcord
- Petzl Footcord
- Attaches to Ascenders for rope ascents
- 100 % Dyneema for increased durability
- Elastic keeps foot in loop. It is adjustable in length, so it works with any type of shoe and stores easily when not in use
- Plate for adjusting foot loop length
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Petzl Connect Adjust
- Petzl Connect Adjust
- Length: 15 – 95 cm
- Weight: 125 g
- Certification(s): CE, UIAA 109
- Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
- Single positioning lanyard with adjustable arm
- The ADJUST rope adjuster’s ergonomic shape offers quick, precise adjustment
- Lanyard adjusts from 15 to 95 cm
- The connector is held in position by a rubber ring, to facilitate clipping
- Dynamic rope lanyard
- More info – https://www.petzl.com/INT/en/Sport/Lanyards/CONNECT-ADJUST
More Details
to reduce the force transmitted to the user in the event of a short fall (1) Used with a locking carabiner Attaches to the belay loop of the harness with a girth hitch (1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
Petzl Paw
- Petzl Paw
- For easily organizing the work station and creating multi-anchor systems
- 19 mm holes allow the locking sleeves of most carabiners to pass through
- made of forged aluminum for an excellent strength-to-weight ratio
- durable markings, thanks to the recessed area in the center of the plate
- Available in Gold
- Material(s): aluminum
- Breaking strength: 36 kN
- Certification(s): CE, NFPA 1983 General Use
- OVERSEAS ORDERS OR BANK DEPOSITS –
- PLEASE ENQUIRECLICK HERE
Petzl Dual Connect Adjust
- Petzl Dual Connect Adjust
- An Adjustable double lanyard!
- Fixed arm length: 45 cm
- Adjustable arm length: 15 to 95 cm
- Weight: 160 g
- Certification(s): CE, UIAA 109
- Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
- Contact pete@accessgear.net
More Details
Adjustable double lanyard allows users to tether themselves to an anchor and install a rappel system in multi-pitch climbing and mountaineering Double lanyard with one fixed arm and one adjustable arm: – 45 cm fixed arm – 15 to 95 cm adjustable arm – the ADJUST rope adjuster’s ergonomics make it easy to manipulate, for quick and precise adjustment of the adjustable arm – dynamic rope lanyard, to reduce the force transmitted to the user in the event of a short fall (1) Easy to use: – the connector is held in position by a rubber ring, to facilitate clipping – one-handed adjustment – used with two SPIRIT SCREW-LOCK-type locking carabiners – attaches to the belay loop with a simple girth hitch (1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.