Dyneema Cord 5mm (copy)
- Sheath and core DB-UHMWPE Beal Dyneema Copy
- An alternative to the Beal Pure Dyneema cord
- Pull tested in a loop to 15kN
- Make your own footloops
- V threads – Use a double or triple fishermans to secure this very slippery cord!!
AV Mazerin Harness
- AV Mazerin Harness
- Canyoning and Caving harness
- Designed for the canyons of La Reunion island
- For easier PPE monitoring, each personal protective equipment has an individual number on the year of manfacture label.
- Individually numbered harness with a honest certification CE, EN 12277+A1 :2018 TypeC https://www.aventureverticale.com/en/canyoning/sit-harness-avca04.html
- Extremely good seated position very comfortable harness
- Made for vertical Canyoning/Caving
- low attachment point because ascending is way easier (when needed)
- Add D shape triple locking carabiner https://accessgear.net/products-page/carabiners-and-maillon-rapides/carabiner-triad-3lock/
- Comes with bum protector included!
- Comfort belt is an extra for those that need a little more.
- Sizes available please ask! pete@accessgear.net
- AV Mazerin Harness sizing –
- XS-M: maxi waist 95 cm (yellow attachment point)
ML: maximum waist circumference 115 cm, (blue attachment point)
XL: maximum waist circumference 135 cm (purple attachment point) - Monitor harness with a pants-shaped protection, an integrated knife-holder and a tie designed especially for bags. Efficient for both canyoning and caving.Designed according to the size and vertical height of the steep canyons on the Island of Reunion but also to meet the requirements and needs related to daily supervision, the Mazerin has been created for professionals who often use the rope climbing up system.Like a seat harness, the pant-shaped protection helps you to remain in a well-seated position while suspended in the air for long periods of time.The mobile leg loops that maintain the butt support strap in place are quick to take on and off, and relieve the groin from friction during approaches, exits, or transitions.Tried and tested over many years and on several expeditions, this monitor sit-harness, with its strap to hold knives, its strap provided especially for bags, has proven its ability to perform for both canyoning and caving.

After trying this AV Mazerin harness on, I realised how I have been wearing an uncomfortable harness for many years! A must for canyoning.
Camp Turbolock
- Camp Turbolock is a progress capture pulley designed to be exceptionally compact robust and efficient.
- Very high efficiency pulley (95%).
- Inner sheave diameter mm 41
- Rope diameter Min mm 8
- Rope diameter Max mm 13
- Working load Max 2,5 kN x 2 = 5 kN
- Breaking load kN 23
- Sheave material Aluminum alloy
- CE EN12278 – CE EN567 – CE EN12841/B
- https://www.youtube.com/watch?v=_YXKo1u_12s
Designed for operation with one hand. A cleverly designed locking mechanism allows the rope to be inserted without removing the device from the anchor, it cannot be opened when the pulley is loaded. A toothed cam is designed for an immediate and strong grab on ropes from 8 to 13 mm.
This cam is enabled and disabled with a protected switch inside the flanges to prevent accidental opening. One movement to open the cam for easier insertion or removal of the rope. Or use the device as a non-locking simple pulley. Two movements to enable the cam.
The two attachment points (main attachment point and the becket hole) allowing for rotation of carabiners for ease of use.
Large diameter sheave with sealed ball bearings – very high efficiency (95%).
Robust construction features hot forged side plates, precision milled aluminum alloy sheave, and stainless steel cam, rivets and pins.
Static X 9mm Fast
- Static X FAST 9mm
- A Non Certified, well tested, Ultra Static rope for experienced users.
- Pull Tested tied in a Figure 8 knot to over 14kN
- B/L unknotted over 20kN
- Diameter 9 mm
- Colour – White with Yellow Red fleck (this may change)
- Material – 100% HTP polyester
- Relative mass of sheath 59%
- Relative mass of core 41%
- Rope elongation @1kN <1%(Aprox)
- 74g/m
- Price p/m
- Made in NEW ZEALAND.
- Contact – pete@accessgear.net
- An incredibly static rope – Not to be confused with a semi static rope. Understand falling on this could cause injury. Only use on bomb proof anchors with no slack in the system. Very hard wearing, great for very skilled cavers or used as a pull down rope where a super static rope is needed.
- This rope does not fit into any certifications for rope or cord. A very fast rope to descend on, especially when new!
- We recommend the use of more friction to begin with……. Do ask if you don’t know.
- Knots easily, but is very firm.
- Very hard wearing.
- Ascending is very smooth.
- Questions – pete@accessgear.net
Petzl Pirana Guide
- Petzl Pirana Guide
- The Petzl Pirana guide is an adjustable friction descender with spur and locking loop for canyoning intended for independent users and guides. It has three rope installation options and allows the degree of friction to be adjusted before starting the descent. A friction spur allows for increased braking power during the descent. The plastic ring keeps the connector in the correct position to facilitate rope installation while the device is attached to the harness, limiting the risk of the device falling.
- Material(s): Aluminum frame, thermoplastic elastomer (TPE) positioning ring
Weight: 110 g
Rope compatibility: 8 to 13 mm - Contact –
pete@accessgear.net
Bear Claw lanyard
- Bear Claw lanyard – very strong
- 40+kgs B/L
- Yellow, Green, or Orange
- Use it on the Axe aventures knife https://accessgear.net/products-page/all-products/bear-claw-alternative-axe-aventures-knife/
Bear Claw (alternative) Axe Aventures knife
- Bear Claw (alternative) Axe Aventures knife
- Stainless Steel SS 420
- A solid emergency knife option for canyoning
- Similar to the CRKT Bear Claw. Made by French company Axe Aventures
- Almost identical in size.
- Comes in its own box including 2 x zip ties and silicon grease.
- Buy a strong lanyard here – 40kgs breaking is a lot! https://accessgear.net/products-page/all-products/bear-claw-lanyard/
- Or make your own lanyard…..
Camp 10.5 mm Express Dyneema Runner
- Camp 10.5 MM EXPRESS DYNEEMA RUNNER 60 CM
- Camp Brand
- Sewn rings of 10.5 mm Dyneema® webbing available in 2 lengths 60, 120
- Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
- Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm
- The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.
- Contact pete@accessgear.net for more info
Camp 10.5 MM EXPRESS DYNEEMA RUNNER 120 CM
- Camp 10.5 MM EXPRESS DYNEEMA RUNNER 120 CM
- Camp Brand
- Batch numbered
- Serial numbered
- Sewn rings of 10.5 mm Dyneema® webbing available in 2 lengths 60, 120
- Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
- Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm has many uses. Temporary lanyard, Anchor,Extended Draw, Footloop in ascending etc……
- The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.
- Certified EN566:2017 ( Be aware some state ‘complies with the certification’ but actually is not certified)
- Contact pete@accessgear.net for more info
DOUBLE CHAIN Ø6 L= 25cm A316L
- Raumer 6mm double chain links
- 25cm long
- Connect this chain using 2 x stainless steel maillon’s
- Great for connecting anchors or fixing rope/webbing anchors that need replacing with permanent anchors
- Durable and suitable for all environments. Like all our anchors, since 2013 made exclusively in AISI 316L.
- Finished in a pale grey to lessen the visual impact.
- Chain can be clipped by 2 persons simultaneously
- Weight = 125 gr
- Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
- Contact pete@accessgear.net
3Ltr pod bag
- 3 Ltr Pod Bag
- The original bag Since 2010 (Copied, but never bettered)
- Now also available with a Bit of pipe for stiffening the top! (See pictures of colour options)
- 3 great options – 1 Solid base 2. Mesh base 3. With pipe for stiffening top.
- Access Gear quality
- Great for industrial abseilers
- Two hanging loops
- Very tough
- 3 ltrs approx
-
Available with mesh on the bottom for drainage, Since 2013, our idea 😉
- Made in New Zealand
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
CRKT Bear Claw
- CRKT Bear Claw™
- Orange colour for visibility
- Ultimate Durability: AUS 8 is corrosion resistant
- Extremely Sharp: Veff Serrations™ provide superior cutting power of rope and straps
- Strong and Lightweight: Glass-reinforced nylon handle is durable and lightweight
- Exceptional Grip: Textured handle provides grip in wet conditions
- Gear Compatible: Durable glass-reinforced nylon sheath with mounting options
- https://www.youtube.com/watch?v=-jnZUTVflp8
-
MEASUREMENTS
Blade Length 2.39″ (60.58 mm)
Blade Thickness 0.13″ (3.40 mm)
Overall Length 5.69″ (144.48 mm)
Weight 3.20 oz. (90.72 g)
Iguazu Wetsuit (Seland brand)
- Iguazu Wetsuit (Seland brand)
- Double lined 6/5/4 mm Canyoning Steamer. With hood and Warm Plush in most of the suit, which makes it a very warm suit.
• Chest and back in 6 mm; abdomen, thighs and lumbars in 5 mm and 4 mm in the
extremities.
• Very warm suit with Warm Plush on fabric trunk, thighs and hood.
• Seams protected on the outside and sealed on the inside.
• Ultrastretch neoprene on shoulders, head and extremities.
• Small Diamond additional reinforcement (high resistance material against abrasion)
on hip pad,elbow and knees.
• RUBBER FLEX 06 reinforcement on hip pad, elbow and knees.
• Adjustable hood to the face with rubber inside and Warm Plush inside.
• Frontal closing system with YKK zipper.
• Front pocket to keep camera and additional pocket with cord to keep the whistle (not
included).• Water drainage holes (on back and front pocket).
COLOUR: Red and black. - ASK for Available sizing!
Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
For more info or advanced orders – Contact pete@accessgear.net
Vertical Evolution 10mm Canyoning hanger
- Vertical Evolution – 10mm Canyoning hanger
- CERTIFIED EN 959
- Radial 32kN
- Axial 22kN
- Light weight! 65gr
- Stainless steel AISI 316L
- Can effectively be used with concrete screws
- Tie directly into the hanger
- perfect for expedition rigging in caves or canyons
- Pulldown the rope easily whist canyoning.
- Rescue opps as part of a 3 point anchor system.

Vertical Evolution – 10mm Canyoning hanger is the simple quality all round answer for your rigging in caves and canyons.
Sling 15cm (Perfect for a Canyon Quick Draw)
- A high quality 27kN CE and UIAA sling
- Bluewater dyneema sling
- Comes with 2 x rubber keepers to keep the carabiners in place. (Like the green one on the right)
- Green, Red, Purple if available
- 15cm long
Any questions – Contact pete@accessgear.net
AV Speleoshoulder
- AV Speleoshoulder
- One size fits all chest harness for caving. Not PPE.
- 38mm webbing for comfortable chest strap, each adjustable by a double loop.
- Four webbing loops for hanging small caving equipment (wrench, etc…) or lanyards.
- The chest ascender is held by a narrow central strap.
- “Use with a sit-harness”
- contact pete@accessgear.net
TRIPLE CHAIN Ø6 L= 37cm A316L
- Raumer 6mm triple chain links for permanent anchor stations and joining hangers together
- 37cm long
- Connect this chain using 2 x stainless steel maillon’s
- Great for connecting anchors or replacing rope/webbing anchors with these permanent anchors
- Durable and suitable for all environments. Like all Raumer anchors, since 2013 made exclusively in AISI 316L Stainless Steel.
- Finished in a pale grey to lessen the visual impact.
- This chain can be clipped by 2 persons simultaneously
- Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
- Weight = 186 gr
- Contact pete@accessgear.net
AV Fast Canyon
- AV-fast-canyon
- A Canyoning harness
- Perfect entry level canyon harness
- Fast adjusting buckles
- S/M Black Yellow. M/L Red & Black
- Wetsuit protection included in price!!
- 560g
- Individually dated and numbered for greater monitoring
- Genuinely certified in France – CE, EN 12277 Type C
- 01 XS-M: waist from 50 cm to 75 cm and thighs from 30 to 55 cm maxi (yellow belay loop)
- 02 M-L: waist from 50 cm to 100 cm and thighs from 30 to 70 cm maxi (blue belay loop)
- 03 XL: waist from 50 cm to 125 cm and thighs from 30 to 85 cm maxi (mauve belay loop, black Spankprotect)
- 04 XXL: waist from 50 cm to 150 cm and thighs from 30 to 100 cm maxi (black belay loop, black Spankprotect)

A really nice canyon harness with included bum protector. For this price its a very good deal!
MOLINA CANYONING Steamer Womens Suit (Seland Brand)
SELAND MOLINA CANYONING STEAMER Womens Suit (Seland Brand)
BLACK/GREY/GREEN (LADIES)
Double-lined 4/3 mm Canyoning Steamer special for canyoning guides.
NEW!: Sealed seams outside, new closure system and YKK frontal zipper.
ULTRASTRETCH neoprene (superelastic) on the whole suit.
WARM PLUSH inside to keep warm. Body in 4 mm.
Sleeves in 3 mm, which provides greater comfort and movement.
NEW! Front pocket to keep the camera and additional pocket with cord to keep the whistle (not included).
Horizontal frontal zipper. Below hip pad, and bottom legs part
with Small Diamond, to protect better this area and RUBBER FLEX 06
reinforcement on the hip pad, elbow and knees.
Pre order please
Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
Contact pete@accessgear.net
Canyoning Technical Manual
Canyoning Technical Manual 2021
Main Author and Illustrations by Grant Prattley
Contributing Author Daniel Clearwater
- Clear diagrams with clear writing
- A5 sized 148mm x 210mm
- 180 pages in full colour
- 200+ drawings
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- The essential canyoning technical manual for aquatic canyons covering core canyoning practices. Recreational canyoners will find this manual very useful, especially those coming from other disciplines such as climbing, caving and kayaking. It will also be very useful for guiding and leading as, in addition to the core practices, group techniques are covered.

The essential canyoning technical manual for aquatic canyons covering core canyoning practices. Recreational canyoners will find this manual very useful, especially those coming from other disciplines such as climbing, caving and kayaking. It will also be very useful for guiding and leading as, in addition to the core practices, group techniques are covered.
Guide XL Screw Gate
- Guide XL Screw Gate
- Camp Brand
- Very strong and durable carabiner for heavy use
- Large gate opening and keylock nose make clipping ropes and webbing easy
- Screwgate with key lock closure
Weight | 82g |
Certification | EN 12275 (B), EN363 (B) |
Major Axis (kN) | 28 |
Minor Axis (kN) | 9 |
Open Gate (kN) | 8 |
Gate Opening (mm) | 23 |
Carabiner Length (mm) | 117 |
Carabiner Width (mm) | 75 |
Material | Aluminum alloy |
An oversized version of our popular Guide carabiner with a unique shape that gives it an excellent strength-to-weight ratio and a huge gate opening for easy handling with ropes and rigging. An excellent choice for anchors and rigging.
Infierno Wetsuit (Seland Brand)
Double-lined 4/3 mm Canyoning Steamer special for canyoning guides.
NEW!: Sealed seams outside, new closure system and YKK zipper.
ULTRASTRETCH neoprene (superelastic) on the whole suit.
WARM PLUSH inside to keep warm. Body in 4 mm.
Sleeves in 3 mm, which provides greater comfort and movement.
NEW! Front pocket to keep the camera and additional pocket with cord to keep the whistle (not included).
Horizontal frontal zipper. Below hip pad, and bottom legs part
with Small Diamond, to protect better this area and RUBBER FLEX 06
reinforcement on the hip , elbow and knees.
Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
ASK for Available sizing!
Contact pete@accessgear.net
SAR Canyon Pack
- SAR Canyon Pack
- Review of an Access Gear pack here https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- Made for Search and Rescue by Access Gear
- The SAR Canyon Pack is Perfect for overnight missions/expedition canyoning trips
- Based on Access Gears very strong and successful canyon bags, but BIGGER!
- Very well Padded shoulder straps and waist band
- Gear loops inside\Hanging loops outside
- Available in Red, Yellow or Blue.
- Bag size 60ltrs/Lid 5ltrs Aprox
- Proper Zipped Lid with mesh inside for drainage
- Very strong bag – Built to last
- Very strong base best material and build quality throughout
- Massive drainage
- Floatation/padding inside of bag
- Base made from extremely wear/cut resistant material.
- From the grass roots of NZ canyoning
- More details on request.
- Comfort and strength
- Contact pete@accessgear.net For overseas orders

The quality bag that will endure made here in New Zealand for Search and Rescue or those overnight missions where you need a lot of gear! Comfort and strength. Superb quality as you would expect from Access Gear.
Canyoning Jacket
- Canyoning Jacket
- Waterproof jacket in high resistant polyurethane coated polyamide
- Blue colour.
- Extra warmth and wind protection
- Fits over wetsuit for canyoning.
- Large armhole with raglan sleeve for a easy movement
- Fleece lined collar. Self grip fastening.
- Shoulder reinforcement
- A double breast pocket closed by Self velcro fastener.
- Velcro adjustment for the cuffs.
- Extra warmth and protection over wetsuit for canyoning.
- Hood inside collar.
- S ,M, L or XL depending on availability.
Kordas Monik 9.7mm Dynamic Rope
- Kordas Monik 9.7mm Dynamic Rope
- Per/Meter
- Outstanding performance for such a rope size.
- DYNAMIC EN:892
- Diameter 9,6 mm
- Weight per meter 60g
- Weight core 38g
- Core percentage 63,3%
- Sheath slippage 0%
- Elongation 6,5%
- Impact force 830 daN
- Number of falls 7
- Dynamic elongation 34%
- By the meter Vivid Pink or Green
- https://www.sacidkordas.com/en/producte/monik-96-copia/
- Contact for spool prices – pete@accessgear.net
- Review here – https://accessgear.net/wp-content/uploads/2017/08/Micheals-review.pdf

A very robust 9.6mm single rated dynamic rope from Kordas. Monik 9,6 is a very compact and light single rope for those experts climbers who want to minimize the ropes volume and height without giving up the safety and the durability of the rope. Outstanding performance for such a rope size.
CAMP NITRO LOCK
CAMP NITRO LOCK
One of the lightest HMS locking carabiners in the world. The Nitro Lock has been optimized to maximize both safety and performance. I-Beam construction delivers a high strength-to-weight ratio while still maintaining a rope friendly radius. The SphereLock nose makes clipping ropes and webbing easy.
- Our lightest HMS locking carabiner
- New screw gate is lightweight and easy to handle
- Sophisticated shape creates a high strength-to-weight ratio
- SphereLock nose makes clipping ropes and webbing easy
- Laser etched marking to indicate if the lock is open or closed
- MaterialAluminum
- Gate Type Screw gate
- Major Axis Strength 22 kN
- Minor Axis Strength 9 kN
- Open Gate Strength 6 kN
- Gate Clearance 24 mm (0.94 in)
- Length 106 mm (4.17 in)
- Width 75 mm (2.95 in)
- Weight 56 g (2.0 oz)
- Contact pete@accessgear.net
Petzl COEUR PULSE 12mm
- Petzl Coeur Pulse
- Material(s): 316L stainless steel
- Certification(s): CE EN 795 B
- Reusable
- 12mm x 60mm
- Easy to use:
– simple, rapid installation and removal, without tools, allowing it to be reused
– locking function limits the risk of involuntary removal - Easy clipping:
– the wide, ergonomic connection hole facilitates carabiner clipping
– the width of the hole allows installation of two carabiners at the same time - Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection holeNB : For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges
-
Contact pete@accessgear.net

– simple, rapid installation and removal, without tools, allowing it to be reused (1) – locking function limits the risk of involuntary removal Easy clipping: – the wide, ergonomic connection hole facilitates carabiner clipping – the width of the hole allows installation of two carabiners at the same time Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection hole Hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use (1) For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges.
Kordas Iris 9mm (Green/yellow)
- Diameter 9 mm
- Price p/m
- Colour Green and Yellow
- Material PA (polyamid)
- Relative mass of core 58.9%
- Relative mass of sheath 41.1%
- Rope elongation 3.4%
- Rated 21.30 kN
- 54 g/m
- Type B
- Certified EN 1891
- Pre shrunk
- A superb personal rope for skilled canyoners

A semi-static rope for intensive use in technical canyons. For those who seek a rope which is lightweight and manageable. Available in high visibility green/yellow bi-colour. SUMMUM is the constructive System of the KORDA’S third generation. This joins the already known Estability and Titan System, a chemical fusion and a physical reinforcement, achieving with this a maximum union between core and sheath and an even higher safety, thanks to the addition of the advantages of the two different systems with proved experience. This is the maximum safety that can be offered to the rope users. The only Bi colour ropes in the world are made by Kordas
CAMP OTTO FIGURE 8 (Standard)
- One of the lightest figure eights on the market
- Camps Standard Figure Eight offers a smooth rappel with minimal impact on the rope.
- The secret to rappelling on a figure eight without twisting the rope is to always feed the rope from directly below never hold the rope off to the side or at an angle.
- Rope Diameter Min (mm): 8
- Rope Diameter Max (mm): 13
- Contact pete@accessgear.net
CurTec 6 ltr drum
- CurTec 6 ltr drum
- After testing my own waterproof drums for over 20 years, I can see the value of having a simple, solid dry storage whist getting into your favourite places. This is it!
- Very good value for money, over time these out last dry bags x 10!
- 100% Waterproof – make sure the lid is tightened prior to getting wet.
- 6 liter
- 3.4ltr https://accessgear.net/products-page/all-products/curtec-drum/https://accessgear.net/products-page/extras/curtec-drum
- Fits in every Access Gear canyoning and cave pack.
- Perfect for keeping gear dry
- Emergency and medical supplies
- Food or cameras etc
- O’ring seal
- Made of polyethylene
- External dimensions: 195mm diametre, 265mm tall
- Opening: 132mm
- Internal depth: 240mm
- Weight: 425g
- Dry bags tend to leak because they are not waterproof, your gear will be wet and your sandwiches soggy, yuk!
- So much quicker to access your equipment than a dry bag.
- Contact pete@accessgear.net

A brilliant option that lasts the test of time. The drum is watertight – Just tighten the lid up prior to entering water 🙂
50mm Single PMP, Black & Green
- Axle: Ball Bearing
- Material: High Quality Aluminum
- Dimensions: 3.97” x 2.9” x 1.37”
- Weight: 6.3 oz (179g)
- Max. Rope: 1/2” (13mm)
- Sheave: 2” aluminum
- 3 Sigma MBS: 36kN (8,093 lbf)
- NFPA1983 Certified
- Made In USA

Prusik Minding Pulleys are especially versatile and may be used in many ways, from progress capture and hauling systems to crevasse rescue, high-lines and Tyrolean traverses. The wide base design maximizes the effectiveness of a Prusik hitch while a unique side plate formation allows the use of larger ropes in a compact pulley ideally suited for 8mm prusik. An oversized bell-shaped top hole accepts 2 large rescue carabiners or multiple small carabiners and allows the carabiners to be rotated freely and completely. Sealed ball bearings provide optimal efficiency and reduce the performance-robbing resistance that is inherent in most multiple component systems. In addition, sealed ball bearings are not prone to failure under misaligned loads or with twisted gear as can be the case with needle bearings. Solid side plates help prevent foreign object access and reduce snagging and are precisely tensioned for easy one-handed operation and secure placement at any point along the rope. FEATURES AND BENEFITS: UL certified to NFPA 1983 “G” General Use. High efficiency sealed ball bearings providing flawless function under conditions that would shut down lesser grade pulleys. Side plates are precisely tensioned for easy one-handed operation and secure placement at any point along the rope. Oversized top hole is designed for use with up to 2 rescue carabiners and is large enough to allow sleeve of locked carabiner to pass through. Low profile fasteners reduce snagging and hanging up when pulley is being moved. Wide base design works most efficiently with Prusik cords of up to 8mm. Made in the USA
Canyon Pack 3
- Canyon Pack 3
- New for 2022!
- Light weight 950gms
- Very strong build quality (best quality materials used)
- 2 x gear loops inside
- Massive drainage through very strong black mesh
- Quick release buckles
- 35Ltrs Aprox!
- Grab handle on back – easy to pick bag up on the go!
- Two strong hanging loops
- Well thought out, no nonsense style to keep the cost down.
- Colours possible Red, Yellow, Orange, Black, Navy Blue, Light Blue
- please ask for availability of colours 🙂
- Many Extras are possible – call Pete 021 1674675 or pete@accessgear.net for attention.

New for 2022, we at Access Gear have made a simple updated canyon bag for the New Year. Moving on from our first ever design but using more mesh than ever for drainage. Originally designed in 2008 – updated three times since – The first and original New Zealand made canyoning bag now updated. Made for purpose!
Atom Lock HMS
Camp brand Atom Lock is a high-strength HMS carabiner designed for belaying and rappelling. The proprietary SphereLock nose combines with a large gate opening to make clipping ropes and webbing easy.
- High-strength HMS carabiner with a secure screw lock closure
- New screw gate is lightweight and easy to handle
- Proprietary SphereLock nose make clipping ropes and webbing easy
- Laser etched marking to indicate if the lock is open or closed
WEIGHT (G) | 82 g |
SHAPE | Pear / HMS |
LOCKING | Screw |
STRAIGHT OR BENT | Straight |
FULL SIZE | Yes |
KEYLOCK | Yes |
SOLID OR WIRE | Solid |
GATE OPENING | 24 mm |
COLOUR | BLUE |
LOCK INDICATOR | Yes |
STRENGTHS (KN) | ![]() ![]() ![]() |
CAMP OTTO FIGURE 8 (large)
- CAMP OTTO FIGURE 8
- The larger version of Camps Standard Figure Eight for abseiling
- features a larger bottom hole that allows it to be used as a Sticht plate for belaying with single ropes.
- Due to thicker stock, it has even smoother action on rappels
- Rope Diameter Min (mm): 8
- Rope Diameter Max (mm): 13
- Colour Red
- Contact pete@accessgear.net
Canyoning pack – Extreme 2 Light
- Canyoning pack – Extreme 2 Light
- A thing of beauty and Nearly 400 Grams lighter than the Extreme 2 .
- Certainly NOT as tough as its heavier original, https://accessgear.net/products-page/access-gear-canyoning-packs/canyoning-pack-extreme-2-new-11012/ but still strong and available in HOT PINK or VIVID GREEN
- Review here – https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- Massive drainage
- Very comfortable
- 60mm padded shoulder straps
- 60mm Waist band
- Padded back
- Built in Floatation
- Cord gear loop with PVC tube cover
- Strong roomy lid, enough for PLBs emergency gear or what ever
- Strong Handle on back
- Hanging Handle inside (Orange) webbing
- Single ACCESS GEAR made Metal buckle on lid for speed.
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10 years.
- Ultra hard wearing material on bottom with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Draw cord
- Stands up alone – A feature we value as canyoners.
- Best quality materials used on all parts as ever.
- Aprox 45ltrs including lid.
- Colours possible are PINK or GREEN
- Contact for availability.
- 1380gms Aprox
- special order on request. (This takes time ;-))
- Contact pete@accessgear.net

After numerous requests we have finally made a HOT PINK Extreme 2 in a lighter weight fabric. Still strong BUT this is lighter in weight so will not be as hard wearing as the original model <<< *PLEASE NOTE* :-)
Curtec drum 3.6ltr
- Curtec drum 3.6ltr
- After testing my own waterproof drums for over 20 years, the value of having a simple solid dry storage place makes sense. This is it!
- Very good value for money, over time these out last dry bags x 10!
- 100% Waterproof – make sure the lid is tightened prior to getting wet.
- Curtec Drum 3.6 ltr
- 6 Ltr – https://accessgear.net/products-page/all-products/curtec-6ltr-drum/
- Fits in every Access Gear canyoning and cave pack.
- Perfect for keeping gear dry
- Emergency and medical supplies
- Food or cameras etc
- O’ring seal
- Made of polyethylene
- External dimensions: 195mm diametre, 170mm tall
- Opening: 132mm
- Internal depth: 150mm
- Weight: 350g
- Dry bags tend to leak because they are not waterproof your gear will be wet and your sandwiches soggy, yuk!
- So much quicker to access your equipment than a dry bag.
- Contact pete@accessgear.net

Curtec drum 3.6ltr – Perfect for dry storage of your gear. We have used these for 20 years – they only leak if you don’t screw the top up correctly :-)) This I found to be true……
Anellox 12mm hanger (offset)
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 12 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for availability pete@accessgear.net
Iris 9mm (Pink/Lilac)
- Iris 9mm
- Kordas
- Diameter 9 mm
- Price p/m
- Colour pink and purple
- Material PA (polyamid)
- Relative mass of core 58.9%
- Relative mass of sheath 41.1%
- Rope elongation 3.4%
- Rated 21.30 kN
- 54 g/m
- Type B
- Certified EN 1891
- Pre shrunk
- A superb personal rope for skilled canyoners

A semi-static rope for intensive use in technical canyons. For those who seek a rope which is lightweight and manageable. Available in high visibility pink/lila bi-colour. SUMMUM is the constructive System of the KORDA’S third generation. This joins the already known Estability and Titan System, a chemical fusion and a physical reinforcement, achieving with this a maximum union between core and sheath and an even higher safety, thanks to the addition of the advantages of the two different systems with proved experience. This is the maximum safety that can be offered to the rope users. The only Bi colour ropes in the world are made by Kordas
Seland Phuket Wetsuit Jacket 2 MM
- Sealand SUPER STRETCHY NEOPRENE JACKET
- 2 mm neoprene jacket.
- Super-stretchy
- Flatstitched
- RED/black color.
- These are fairy tight in sizing but are designed to be snug.
- L, or XL only
- Sizing here https://accessgear.net/2020/08/27/seland-wetsuits-from-access-gear-27-8-20/
AustriAlpin No MAD
- AustriAlpin No MAD
- Silver colour
- specially formed figure-8 for canyoning
- Different grades of friction possible,
- Rope size 8.5mm – 11mm
- CE/UIAA cert
- Length 130mm
- Width 90mm
- Weight 107g
- Rated 35kN
- Material Aluminium alloy
- https://www.youtube.com/watch?v=tGQ3cqF9AxE
- Contact – PLEASE ENQUIRE – CLICK HERE
Raumer Anellox 10mm hanger
- Raumer Anellox 10mm hanger
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 10 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for bulk buy pete@accessgear.net

The Raumer Anellox 10mm hanger is the revolutionary new anchor designed to be used with very long bolts or screws Multi Monti. New form that allows a precise and comfortable housing of the bolt in the anchor, speeding up the work. Totally new shape has been designed with a new radius that allows multidirectional traction; you can indeed use it in the three directions, unlike with the old model it is also ideal for equipping roofs or overhangs. It allows the creation of complex rigging systems. The 10 mm hole means it can be attached to the rock using expansion bolts or M10 screw anchors
Extreme 2 Mesh canyon pack (Black/Red)
- Extreme 2 Mesh canyon pack
- Black/Red
- The best Build Quality!!
- The best drainage possible
- Very comfortable – 65mm padded shoulder straps and 65mm Waist band
- Padded back
- Built in Floatation (unless you are carrying heavy metal objects)
- Cord gear loop with PVC tube cover
- 2 x gear loops
- Strong roomy lid, enough for PLBs emergency gear or what ever you can get in
- Strong Handle on back
- Hanging Handle inside strong webbing
- Single ACCESS GEAR made Metal buckle on lid for speed!
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10years!!
- The base is the toughest material possible with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Coloured draw cord
- Stands up alone – A feature we value as canyoners
- Simply the Best quality materials used on all parts as ever
- Aprox 45ltrs including lid
- Colours Red/Black
- Can make special orders on request. (This takes time ;-))
- Contact pete@accessgear.net

Our best bag ever we believe. A continuation on the reputation of our original Extreme Mesh canyoning bag used across NZ, we have upgraded the design to higher comfort level a single metal buckle on the lid, a true unique, robust and functional canyoning bag with all the features needed for what you love to do. CANYONING! We can make special orders/custom runs etc pete@accessgear.net Extremely well thought out design. Light in weight /Super Strong in action. High build quality!!!
HMS (Camp) Carabiner
- HMS (Camp) Carabiner
- Excellent belay carabiner with secure screw lock
- Large opening and keylock nose make clipping ropes and webbing easy
- Available in polished, blue.
- Standard(s): EN 362 – EN 12275
- Height (mm) : 116
- Width (mm): 73
- Gate Opening (mm): 23
- Major Axis (kN): 25
- Minor Axis (kN): 8
- SOLD OUT!

Large screw gate carabiner designed for belaying and rappelling with either a Munter hitch or standard belay device. Keylocking closure eliminates snagging.
Petzl Oscillante
- Material(s): aluminum side plates, nylon sheave
- Certification(s): CE EN 12278, UIAA
- Weight 42 g
- 7mm-11mm
- 71% Efficiency
- Working load 4kN 2 strands 2 kN one Strand
- Breaking Load 15kN
- Aditional info and overseas orders pete@accessgear.net
Extreme 2 Mesh canyon pack (Yellow/Blue)
- Extreme 2 Mesh canyon pack
- Yellow /Blue Extreme 2 mesh
- Black/Red colour here https://accessgear.net/products-page/canyoning-packs/extreme-2-mesh-canyon-pack/
- The best Build Quality!!
- The best drainage possible
- Very comfortable – 60mm padded shoulder straps 60mm Waist band
- Padded back
- Built in Floatation (unless you are carrying heavy metal objects)
- Cord gear loop with PVC tube cover
- 2 x gear loops
- Strong roomy lid, enough for PLBs emergency gear or what ever you can get in
- Strong Handle on back
- Hanging Handle inside strong webbing
- Single ACCESS GEAR made Metal buckle on lid for speed!
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10years!! https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- The base is the toughest material possible with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Coloured draw cord
- Stands up alone – A feature we value as canyoners
- Simply the Best quality materials used on all parts as ever
- Aprox 45ltrs including lid
- Colours Yellow/Blue
- Can make special orders on request. (This takes time ;-))
- Contact pete@accessgear.net

Our best bag ever we believe. A continuation on the reputation of our original Extreme Mesh canyoning bag used across NZ and Australia for over 10 years, we have upgraded the design to higher comfort level a single metal buckle on the lid, a true unique, robust and functional canyoning bag with all the features needed for what you love to do. CANYONING! We can make special orders/custom runs etc pete@accessgear.net Extremely well thought out design. Light in weight /Super Strong in action. High build quality!!
Allenox 8mm hanger (offset)
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 8 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for bulk buy pete@accessgear.net

You can use it in the three directions, and is also ideal for equipping roofs or overhangs. This anchoring ring is very appreciated in caving and rescue because it allows the creation of complex rigging systems.
Petzl Mini prusik minding pulley
- Petzl Mini prusik-minding pulley.
- 25mm aluminium sheave, sealed ball bearings:
- Efficiency 91%.
- Ropes 7-11mm dia.
- WLL 5kN UIAA
- Breaking load 23kN
- 80g
- 7 < 11mm rope.

Special side plates designed for use with a Prusik friction hitch in progress capture systems Sheave mounted on sealed ball bearings for excellent efficiency Compact and lightweight
Mini Canyon Pack
- Mini Canyon Pack
- Small but so tough!!
- Made for lightweight trips or carrying smaller amounts of gear.
- Perfect for speedy canyon descents with lightweight rope
- Based on Access Gears successful canyon bags, but SMALLER!
- Padded shoulder straps.
- Proper sewn on waist band
- Gear loops inside
- Access Gears own unique buckle
- Available in Red, Yellow or Blue. (If available)
- Bag size 20ltrs/Lid 3ltrs Aprox
- Proper Zipped Lid with mesh inside for drainage
- Very strong bag – Built to last
- Massive drainage
- Floatation inside of bag
- Base made from extremely wear/cut resistant material
- From the grass roots of NZ canyoning
- Super cute! But very very tough!
- Contact pete@accessgear.net For overseas orders
Canyoning Rope
- Canyoning Rope
- Kordas Dana 10
- EN 1891 certified – This is really important please ask!
- The most popular rope used all over New Zealand for good reason
- Well tested for years
- Colors – Orange, Pistachio, Fuchsia
- Sheath core fusion
- Finish Durability: high resistance to abrasion with a nicer touch
- Dry treated Finish TOTAL DRY: thermochemical with fluorocarbon finish
- Diameter 9,9 mm
- Material PA (polyamid)
- Relative mass of sheath 39.4%
-
Core percentage 60,6%
- Rope elongation 2.7%
- Strength 27,80 kN
- Strength in knot 15kN
- Type A https://www.sacidkordas.com/wp-content/uploads/2020/08/DANA-10-2020-ES-EN.pdf
- Weight 63,1 g/m
- Shrink less Canyoning rope
- Sheath slippage 0%
- Price p/m
- More info here on Kordas Dana 10 https://www.sacidkordas.com/en/dana-10/
- Contact for whole spool. PLEASE ENQUIRE – CLICK HERE

The number 1 selling – Used all over New Zealand for a reason. This semi static canyoning rope is made for larger groups Highly manageable and easy to handle and highly visible. There is no need to pre- soak this rope it is preshrunk. Some ropes lose up to 8% of there length on the first use! Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of socking or the cover slipping over the rope. This rope gives a better dimensional stability over its lifetime. Significant reduction of progressive shrinkage of the rope over time. This finish makes it unnecessary to wet the rope before us. The first time you wet it will not shrink and lose between 4 and 8% . Finish Durability: high resistance to abrasion with a nicer touch Finish TOTAL DRY: thermochemical with fluorocarbon finish. The rope is waterproof. Absorbs less water, lasts longer and does not freeze. Great colours and massively popular in europe!
Bluewater VT Prusik 8mm
- Bluewater VT Prusik 8mm
- Made by Bluewater this VT Prusik is the real deal.
- Made from Technora material
- Rated 20kN across from eye to eye
- Rated 29kN Basket
- Two sewn eyes
- 33 inches – 84cm
- Technora Sheath – This is heat resistant way above other materials.
- Bar tacked using Technora thread
- Manufacturing date and ID number
- Made in the USA
- How to tie a VT here – http://www.netknots.com/rope_knots/valdotain-tresse
- Watch this video https://www.youtube.com/watch?v=Z-xjqI1WOY8
- Testing here https://www.youtube.com/watch?v=szd5upswbVQ
- This specialty design features a tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from flattening and binding up. A computerized large gauge sewing machine is used to bar tack a devilishly strong stitch with our custom Technora thread. This thread / stitch combination yields superior strength and overall durability. Manufactured in the U.S.A.The VT Prusik is a versatile open-end Prusik. Use to tie:
Symmetric Prusik, Asymmetric Prusik (Schwabisch/Distal), Valdotain Tresse, French PrusikThe VT Prusik 8mm performs well when used for ascending, self-belay while rappelling, as a traveling rope grab, or in conjunction with a Prusik minding pulley in haul systems.Overall length: 33″
For use on ropes 8mm – 13mm in diameterTensile Strengths:
End to End: 4,400 lbf
Basket: 6,500 lbf

The original Bluewater VT prusik 8mm – A European idea based from taking strands out of a climbing rope. Much improved buy Rich Carlson and Bluewater using Technora material which is heat resistant so doesn’t melt in use. Don’t be fooled by inferior products – This is it! This specialty design features a tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from flattening and binding up. A computerized large gauge sewing machine is used to bar tack a devilishly strong stitch with our custom Technora thread. This thread / stitch combination yields superior strength and overall durability. Manufactured in the U.S.A. The VT Prusik is a versatile open-end Prusik. Use to tie: Symmetric Prusik, Asymmetric Prusik (Schwabisch/Distal), Valdotain Tresse, French Prusik The VT performs well when used for ascending, self-belay while rappelling, as a traveling rope grab, or in conjunction with a Prusik minding pulley in haul systems. Overall length: 33″ For use on ropes 8mm – 13mm in diameter Tensile Strengths: End to End: 4,400 lbf Basket: 6,500 lbf
Petzl Partner (pulley)
- Petzl Partner (pulley)
- Extremely lightweight and ultra-compact pulley
- Quick and easy installation due to the swinging side plates
- Sheave mounted on sealed ball bearings for excellent efficiency
- Material(s): aluminum side plates, aluminum sheave
- Certification(s): CE EN 12278, UIAA
- Weight 56g
- 7mm – 11mm
- Efficiency 91%
- Working load 5kN
- Breaking Load 15kN
- Contact pete@accessgear.net
Hanger 12mm 316L Stainless Steel
- 12mm hole
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Material: Stainless Steel AISI 316L
- Made in Italy
- Certified UIAA 123-2 Rock anchor
- Contact for bulk buy pete@accessgear.net

Certifications CE EN 795:2012 – Anchors – type A Complies with EN 959:2007 – Rock anchors UIAA 123-2
Canyoning pack – Extreme 2 – Light Blue
- Canyoning pack – Extreme 2
- Review here – https://canyonmag.net/explore/access-gear-expedition-canyoning-bag/
- Massive drainage
- Very comfortable
- 60mm padded shoulder straps
- 60mm Waist band
- Padded back
- Built in Floatation
- Cord gear loop with PVC tube cover
- Strong roomy lid, enough for PLBs emergency gear or what ever
- Strong Handle on back
- Hanging Handle inside (Orange) webbing
- Single ACCESS GEAR made Metal buckle on lid for speed.
- Super mesh featured on our Extreme canyoneering bag used across NZ for well over 10 years.
- Ultra hard wearing material on bottom with extra sewn webbing and eyelets.
- Stainless Steel eyelets
- Draw cord
- Stands up alone – A feature we value as canyoners.
- Best quality materials used on all parts as ever.
- Aprox 45ltrs including lid.
- Colours possible are Yellow, Red, Blue, Orange, Black possible.
- Contact for availability.
- Can make special orders on request. (This takes time ;-))
- Contact pete@accessgear.net

The Canyoning pack – Extreme 2 is a further upgrade on the original hardcore New Zealand canyon pack- Building on the reputation from our original Extreme canyoneering bag used across NZ,since 2010 we have upgraded the design to higher comfort level and added a lid. (a Access Gear first in 2010) A true unique, robust and functional canyoning bag with all the features needed for what you love to do. CANYONING! We can make special orders/custom runs etc pete@accessgear.net Extremely well thought out design. Light in weight /Super Strong in action.
NEOPRENE GLOVES 2 MM
- 2 mm Super-Stretch neoprene gloves
- Glued and blindstitched.
- PU anti-slipping on palm and fingers.
- Perfomed pattern.
- M,L,XL sizes available
Black Diamond Half Dome helmet
- A great all round helmet
-
Weight : [S/M] 310 g (11 oz) [M/L] 340 g (12 oz)
-
Size Range : [S/M] 48 – 57 cm (19 – 22.5 in) [M/L] 55 – 61 cm (22 – 24 in)
- Colours Grey, Orange, or White (check for availability)
- Contact pete@acessgear.net

Black Diamonds durable, comfortable and supremely adjustable workhorse. Comes in two sizes, please ask what is in stock at time of ordering.
Canyoning Pack (Guide)
- Canyoning Pack (Guide) Access Gear
- The original Extreme canyon bag was Designed in conjunction with canyon guides to produce a hard wearing bag for repeated arduous use. This is the result of an upgrade The new ‘Guide pack‘
- From the basics of the original bomb proof NZ canyon bag! (Nothing outlasts this bag)
- Old style here https://accessgear.net/products-page/canyoning-bags/extreme-canyoneering-bag/
- Now with Padded shoulder straps.
- Extremely tough plastic mesh – very well draining
- Fully tested by canyon guides throughout NZ for many years.
- Simple gear loops inside 2x.(same as past, but better)
- Able to stand up alone for rope packing
- Seams reinforced with extra webbing
- More mesh – more drainage.
- More eyelets in the base – more drainage still.
- 2 x simple hanging loops.(Add your own choice of lanyard)
- The base is a new and better shape, now made with way harder wearing material.
- The bag is more ergonomic than ever before.
- Padded shoulder straps.
- Provision for a waist belt, if you want to use one, which you may well not.
- An optional removable waist belt and optional sleeve for foam.( please ask)
- Back carry handle.
- Very well tested throughout NZ
- Bi-colour bags are now optional at request, like these (see photos).
- 670 mm (h) x 480 mm (w) Flat
- 50+ litres approx.
- More info – pete@accessgear.net

Canyoning Pack (Guide) ‘Extreme Canyon Bag’ remake……. The original Extreme model is the biggest selling canyoning pack in New Zealand, for good reason. These packs have endured years and years of hard guiding and recreation. (nothing outlasted these) We have upgraded and renamed it. Keeping the hard wearing basics and adding more comfort at the same time. Our mission has and always will be, to make the best quality gear that lasts the test of time.
ORBIT LOCK -3 PACK Orange
- Camp ORBIT LOCK -3 PACK Orange
- A lightweight and compact locking carabiner for anchors and rigging – 46 grams each
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net

The body design of the Orbit Lock adds strength and rigidity while maintaining a truly utilitarian size for everything from anchors and rigging to attaching auto-blocking belay devices where a compact D tends to fit better than larger HMS style carabiners. The proprietary SphereLock nose makes clipping ropes, webbing, chains and pro easy.
HCR Hanger 10mm (For Marine environments) Best resistance ever!
- Highly resistant to saline corrosion: Also called HCR
- The anchors have been marked with a fish symbol and the initials “INOX”.
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- CE EN 795:2012 – Anchors – type A
- Complies with EN 959:2007 – Rock anchors
- UIAA 123-2
- Made in Italy
- Marine version!!!! HIGH CORROSION RESISTANCE or HCR
- Contact for bulk buy pete@accessgear.net

This Raumer hanger has become a classic in the mountaineering and climbing world. Ideal for climbing, mountaineering, caving, canyoning and rescue. Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality. Hanger for multi directional traction. Now in this ‘Marine’ version for a longer lasting option in the harshest environments!
Bolts for climbing
- Bolts for climbing (May vary from picture)
- 10mm x 86mm DUPLEX
- 316 Stainless Steel DUPLEX Expansion bolt (Certified)
- Certified https://fiproductmedia.azureedge.net/media/Certification%20Documents/ETA%20European%20Technical%20Assessment/fischer/ZD_ETAB_F_07-0211-1_SEN_AIP_V1.pdf
- Performance documentation
- https://fiproductmedia.azureedge.net/media/Certification%20Documents/DOP%20Documents/fischer/ZD_DOP_EN_FBN-II_DOP-0192_ETA-07_0211.pdf
- New Zealand Speleology Society – Members subsidy contact pete@accessgear.net with your NZSS Number
- Bulk buyers pete@accessgear.net
- Other bolts available just ask.
- Just add a 10mm hanger https://accessgear.net/products-page/climbing-hangers-and-bolts/hanger-10mm-316ss/
Access Gear 200m Rope bag
- Access Gear 200m Rope bag
- A Large volume, big burly rope bag, with comfort!! (yes it does exist)
- Padded shoulder straps.
- Very strong bag/material as you would expect from Access Gear!
- 2 x Hanging loops one is a handle.
- 2 x loops inside.
- A couple of eyelets in base.
- Pocket inside with foam for comfort.
- Base made from incredibly resilient material.
- A very well thought out design for comfort and volume. (Not just a sack on your back!)
- 70lts aprox.
- Royal Blue colour – Other colours please ask pete@accessgear.net
- Extras available too! ASK 🙂
Carry 200m or a Vast amount of equipment to your job site!
Arborists, Industrial operations, Harwoods hole, Skytower, Rescue operations, SAR this is it!

There was clearly a need for a large volume rope bag/gear bag with comfort. Access Gear have produced just this. Its massive volume means you can take a lot of gear with you (or a really big lunch) with relative ease. All without suffering due to an uncomfortable bag. The gear will weigh the same but this will help you out. Do ask for more info.
Petzl Boreo Helmet
- Petzl Boreo Helmet
- Rugged:
– hard outer shell is impact and scratch resistant for optimal durability
– hybrid construction with thick ABS shell, an EPP foam liner and an EPS foam liner makes it compact on the head
– soft headband conforms perfectly to the shape of the head and folds into the shell for storage and transportation - Head-covering design for optimal protection against lateral, front and rear impact:
– carries Petzl’s TOP AND SIDE PROTECTION product label
– head-covering shape, lower in the rear, offers reinforced protection - Versatile, for a variety of activities:
– suitable for , caving, canyoning, climbing, mountaineering, via ferrata,
– four clips for headlamp attachment - Material(s): ABS shell, expanded polypropylene (EPP) liner, expanded polystyrene (EPS) liner, polyester webbing
- Red, Blue, Green,White when available. Please Ask
- Certification(s): CE EN 12492, UIAA
- 48-58 cm S-M
- 53-61 cm M-L
ORBIT LOCK (3 PACK) Gun Metal Grey
- ORBIT LOCK (3 PACK) Gun Metal Grey SOLD OUT!
- A lightweight and compact locking carabiner for anchors and rigging
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net
- SOLD OUT!

The body design of the Orbit Lock adds strength and rigidity while maintaining a truly utilitarian size for everything from anchors and rigging to attaching auto-blocking belay devices where a compact D tends to fit better than larger HMS style carabiners. The proprietary SphereLock nose makes clipping ropes, webbing, chains and pro easy.
Fina 8.5mm (RED)
- Fina 8.5mm RED
- Diameter 8,5 mm
- Material PA (polyamid)
- Relative mass of sheath 42,8%
- Rope elongation 4,6%
- Rated Strength 20,3 kN
- Rated Strength in knot 12kN
- Type B
- Weight 48,3 g/m
- Shrink less
- Sheath slippage 0%
- EN 1891 certified
- Price per metre
The lightest and of least volume semi-static rope. For use by expert canyoners and cavers! Perfect for expeditions and exploration. Its TITAN SYSTEM and highly resistant sheath offer safety features far higher than would be expected from its reduced size.

Made for highly skilled canyoners where weight is a priority. The Korda’s Titan system is more than just a finishing. It is a , patented rope manufacturing system which bestows significant improvements and characteristics on the rope. Until now, ropes basically are made out of two structures: the core and the sheath. Finishing STABILITY: total binding of the sheath and core. Elimination of the effect of stocking or slip the cover over the rope. Rope gives a better dimensional stability over its lifetime. Significantly reduces the progressive shrinkage of the rope over time. This finish makes it not unecessary to wet it before use, it will not shrink (you won’t lose between 4 and 8% of rope on fist wetting) Finish – Durability: high resistance to abrasion with a nicer touch The Titan system incorporates a third structure constituted by a series of filaments running parallel to the rope axis inside the sheath structure, thus transforming it into an element of “armour plating”. The rope does not need wetting before use, as it is pre-shrunk at the factory. From the reel directly to the vertical..
Petzl PULSE 8mm
- Petzl PULSE 8mm
- Caving anchor.
- Quick to use:
- Material(s): stainless steel, aluminum
- Certification(s): CE EN 795 B
- Drilling diameter 8mm
- Drilling depth 5 cm
- instantly placed by activating the release plunger
- anchor is completely removed by pressing on the release plunger and pulling on the hanger
- easy to install and remove
– locking wrench for extended use or use with groups
– twisted hanger designed to hold the connector parallel to the wall
– interchangeable hanger - More responsible equipment practice for caving:
– the anchor does not rust underground
– the condition of the anchor can be checked - https://www.petzl.com/INT/en/Sport/Anchors/PULSE
ORBIT LOCK
- A lightweight and compact locking carabiner for anchors and rigging, 46 grams each!
- New screw gate is lightweight and easy to handle
- Optimized design increases strength without increasing weight
- Slim nose profile features our proprietary SphereLock closure
- Laser etched marking to indicate if the lock is open or closed
- Available in 2 colors
- Height (mm): 98
- Width (mm): 58
- Gate Opening (mm): 17
- Major Axis (kN): 24
- Minor Axis (kN): 8
- Open Gate (kN): 8
- Weight 46 Grams
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 B
- Contact pete@accessgear.net

The body design of the Orbit Lock adds strength and rigidity while maintaining a truly utilitarian size for everything from anchors and rigging to attaching auto-blocking belay devices where a compact D tends to fit better than larger HMS style carabiners. The proprietary SphereLock nose makes clipping ropes, webbing, chains and pro easy.
GUIDE LOCK carabiner (Camp)
GUIDE LOCK carabiner Camp)
- Camp brand
- A Very strong and durable quality carabiner for heavy use! 32Kn
- Keylock nose for clipping into anchors
- Standard(s): EN 362 – EN 12275
- Height (mm) : 112
- Width (mm): 63
- Gate Opening (mm): 18
- Major Axis (kN): 32
- Minor Axis (kN): 10
- Open Gate (kN): 10
- Lock Type: Screw Gate, Key Lock
- Material: Aluminum alloy
- Contact pete@accessgear.net for inquiry’s and bulk orders

Smooth operating, super strong D screw gate carabiner with a keylock closure to reduce snagging. A great choice for serious mileage.
Raumer Belay Station 10mm + Ring 316 SS
- Raumer Belay Station 10mm + Ring 316 SS
- Click on photo for full picture.
- Material: Stainless Steel AISI 316L
- Weight: 296gr
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- CE EN 795:2012 – Type A anchors
- Complies with EN 959:2007 – Rock Anchors
- UIAA

Raumer Belay Station 10mm + Ring 316 SS is a High quality certified stainless steel 316 belay station.
Kordas Accessory Cord 6mm
- 6 mm Kordas accessory cord.
- Strength 8.5 kN
- Tie your own prusiks
- Yellow, Red or Green when available
- CE 0120
- Price per metre or contact for whole spool.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Dyneema Foot loop
Dyneema Foot loop
- Using Genuine Dyneema cord
- Strong stitched webbing and cord
- Adjustable with hardened aluminium slider
- Double thick Nylon webbing for feet (webbing stays open when needed)
- D ring for tidy hanging on harness
- Very thick clear glue heat shrink over top of bartack stitch
- We broke a footloop to test its strength!! Breaking at the adjustment buckle – 6.2kN seems very reasonable for a non PPE footloop to us.

After using many types of foot loops, I eventually decided to make a hybrid all around version incorporating my thoughts and other cavers ideas – ( you know who you are) this is the result. Strength/wear resistance, ease in use, hardened aluminium and the best materials. Hanging D-ring
Raumer Double chain Belay Station + Two rings
- Raumer Double chain Belay Station + Two rings
- Double chain belay station
- Stainless steel AISI 316L, which offers a higher resistance to marine corrosion than AISI 304.
- Radial R = 27 kN Extraction R = 25 kN Weight = 590 gr
- Drill Ø10mm
- 2 Chains and 2 Round Rings Ø10
NIMBUS LOCK
- Compact HMS belay and rappel carabiner with secure screw lock closure
- New screw gate is lightweight and easy to handle
- Proprietary SphereLock nose makes clipping ropes and webbing easy
- Laser etched marking to indicate if the lock is open or closed
- Height (mm): 101
- Width (mm): 71
- Gate Opening (mm): 22
- Major Axis (kN): 21
- Minor Axis (kN): 9
- Open Gate (kN): 6
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 12275 H
- Contact pete@accessgear.net for inquiries or bulk orders

The Nimbus Lock has all of the benefits of a full-utility HMS locking carabiner in a compact size. The unique shape ideally positions ropes for smooth belays and rappels and the proprietary SphereLock nose makes clipping ropes and webbing easy.
Kordas Accessory Cord 7mm
- Certified auxiliary rope (EN-564)
- 7mm
- Perfect for prusiks
- 12.5kN ((EN-564 certified)
- Green, Yellow or Red (depending on stock available)
- Kordas brand (made in Spain)
- Overseas orders contact pete@acessgear.net
Kong Oka
- Canyoning Descender
- Weight: 95g
- Size: 94mm x 141mm
- For rope size 7,8-12,7mm
- Many ways to use this technically designed descender
- Spare rubber connecter for carabiner/descender connection
- SOLD OUT!!!
Camp Core Lock HMS Carabiner
- Camp Core Lock HMS Carabiner
- Extremely smooth HMS belay and rappel carabiner with secure screw lock closure
- New screw gate is lightweight and easy to handle
- Large gate opening and proprietary SphereLock nose make clipping ropes and webbing easy
- Laser etched marking to indicate if the lock is open or closed
- Height (mm): 114
- Width (mm): 77
- Gate Opening (mm): 27
- Major Axis (kN): 23
- Minor Axis (kN): 11
- Open Gate (kN): 6
- Lock Type: Screw Gate
- Material: Aluminum
- Standard(s): EN 362 B – EN 12275 H
- Contact pete@accessgear.net for inquiry’s and bulk orders

The unique shape of the Core Lock HMS carabiner creates a very wide gate opening and positions ropes for the smoothest belays and rappels. The proprietary SphereLock nose makes clipping ropes and webbing easy.
Kordas Accessory Cord 8mm
- Kordas Accessory Cord 8mm
- 8mm Cord Kordas brand
- Works very well as prusic cord on 10mm rope
- Diameter: Ø 8 mm.
- Weight : 40 gram per meter
- Max. Breaking Strength: 1540 daN
- Material: Nylon (Polyamide 6)
- Yellow Blue or Red (depending on stock available)
- Kordas brand (made in Spain)
- Overseas orders contact pete@acessgear.net
- Tested by a UIAA-approved institute for breaking strength.
- CE 0120 EN 564
- Made in Spain by Kordas

8mm cord has many uses from prussic to anchor building etc. This cord works on muddy caving ropes.
Multi Monti Plus Screw Anchor Ø10×80 Zinc/Nickel coated (Latest version)
- The original screw anchor now with better upgraded model
- Drill Ø 8mm hole with quality drill bit!
- Ø 10mm x 80mm
- Now with more holding power and larger thread
- longer lasting leading cutting edge, way better than others for ease of use
- Zinc/Nickel coated for better resistance
- 13mm hex head
- Works perfectly with Allenox 10mm
- Build strong removable anchors.
- Reusable – Not more than 3 times!

MULTI-MONTI anchors are a innovative self-threading screw system, and are highly resistant and practical. The first part of the Multi-Monti thread is characterised by thread serration / teeth. When screwed, the anchor cuts into the material and creates the space for the rest of the screw. Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage. The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused. This procedure should not be employed more than three times on rock and only once on granite.
Croll L (Large)
- Croll L (Large)
- Material(s): aluminum frame, stainless steel cam, nylon safety catch
- Weight: 140 g
- Efficiency optimized for wide-diameter ropes:
- Rope compatibility: 8 to 13 mm
- Certification(s): CE EN 567, UIAA
- Weight: 140 g
- The Croll for larger ropes is back!
- Contact pete@accessgear.net
Camp COMPACT OVAL LOCK
- Camp COMPACT OVAL LOCK
- One of the strongest oval carabiners on the market
- Standard(s): EN 362 – EN 12275
- Height (mm) : 106
- Width (mm): 57
- Gate Opening (mm): 16
- Major Axis (kN): 24
- Minor Axis (kN): 10
- Open Gate (kN): 7
- Lock Type: Screw Gate, Key Lock
- Material: Aluminum alloy
- UIAA Certified
- Contact pete@accessgear.net for bulk orders

Compact style of oval carabiner with an exceptional strength to weight ratio. Features a keylock screw gate closure. Locking oval carabiners are ideal for work with pulleys, caving, and big walls and aid climbing.
Edelrid Hannibal
- Edelrid Hannibal
- Suitable for single ropes from 7.8 – 12 mm
- Internal rubber ring to hold the carabiner in place – prevents dangerous cross loading
- Geometry designed specifically for canyoning
- Different braking positions due to horns
- High-strength aluminum alloy
- Aluminum
- Certification: EN 15151-2
- Weight: 105 g
- https://www.youtube.com/watch?v=xd0doYWFWds&t=2s
- Contact pete@accessgear.net for more info

The Hannibal by Edelrid is a figure of eight abseil device designed specifically for canyoning with different braking positions.
Tubular webbing 25mm (Genuine Certified/UIAA)
- Tubular webbing 25mm (Genuine Certified/UIAA)
- Very high quality 25 mm tubular webbing.
- Red, Black, Yellow when available
- Genuine UIAA certified webbing (beware of webbing without UIAA certification)
- Climb spec
- Genuinely CERTIFIED EN 565
- 18 KN rated minium strength.
- 40gms p/m dry, 56gms p/m when wet. (webbing can vary a lot in weight. Loose weave webbing is unusually heavy compared to this, especially when wet. Adding over 70% in weight )
- Price per metre or contact for whole spool.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- https://theuiaa.org/documents/safety-standards/103_UIAA_Tape%20V3_2018.pdf
- Check your webbing supplier

When buying webbing please be sure that it really is certified by an independent certifying body. ‘Meets the spec’ does not mean it actually is certified at all. The UIAA are recognised as the leading authority in certifications in Europe – It means a lot, and they stand by their work.
Beal Asymmetrical carabiner – Triple locking
- Asymmetric screwgate karabiner for lanyards or belay devices
- Its design and shape make it particularly easy to use at the end of a lanyard to clip to a belay.
- When a belay device is used, this asymmetrical karabiner ensures that the device is always guided towards the karabiner’s apex.
- Keylock system
- Lanyards and belaying with a device
- 26kN
- 8kN minor axis
- Belaying and Abseiling
- SOLD OUT!
Webbing 15mm
- Very high quality 15 mm tubular webbing.
- Red, Black, when available!
- UIAA Certified
- 13.4 KN rated minium strength.
- Price per metre or contact for whole spool.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- UIAA Certified webbing https://theuiaa.org/documents/safety-standards/103_UIAA_Tape%20V3_2018.pdf
- Check your webbing supplier for lesser quality – This product is excellent.
- Contact pete@accessgear.net
Petzl Huit
Petzl Huit
- Square shape helps reduce rope twist and girth hitch formation
- Compact and lightweight
- Small hole can be used with thin ropes if necessary, or as a belay plate
Material(s): aluminum
- Weight: 100 g
- Rope compatibility: 8 to 13 mm (single and half ropes)
- https://www.petzl.com/INT/en/Professional/Descenders/HUIT
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
Beal Be link Screwgate
- Asymmetric carabiner
- Great for cows tails and belaying
- Major axis 27kN
- Open gate 8kN
- Minor axis 8kN
- UIAA Certified
- Sold out!
Petzl Tibloc
- Petzl Tibloc
- Extremely compact and lightweight:
- An efficient piece of basic equipment
- Can be used as a progress capture device in a hauling system or for ascending ropes
- Material(s): stainless steel
- Weight: 35 g
- Rope compatibility: 8 to 11 mm
- Certification(s): CE EN 567, EAC

Material(s): Stainless steel Weight: 39 g Rope compatibility: 8 to 11 mm rope with a locking carabiner Certification(s): CE EN 567, UIAA
Ring Hanger 10mm
- Ring Hanger 10mm
- The most popular ring hanger out there
- 316L Stainless Steel
- Plate bent at 40°
- Stainless Steel Round Ring Ø 10 mm bolt needed
- The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility.
- The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
- Low friction rope retrieval as the weight is spread over 360°.
- Made in Italy
- Contact for bulk pricing pete@accessgear.net

A very popular Ring Hanger 10mm used for mountaineering, climbing and canyoning anchor, used to equip simple, efficient and secure belays at a very competitive price. Used in pairs (for obvious safety reasons); usually with one as the load-bearing anchor and the other as a passive back-up. CE EN 795:2012 – Anchors type A Complies with EN 959:2007 – Rock anchors Weight: 132 gr Thick: 3,5 mm Dimensions: 44 x 92 mm Static Shear Strenght: 25 KN Extraction Static Strenght: 29 KN Usable by 1 person at a time UIAA 123 – 2
Beal Be One Screwgate Carabiner
- Compact, lightweight, easy to handle design for belaying and top roping
- Pear shaped for use with belay devices that are use in conjunction with a dedicated carabiner
- Screwgate
- Keylock nose prevents snagging
- Enlarged receiving zone with a 12mm rope contact surface
- Strength – Closed Gate 24kN
- Strength – Open Gate 7kN
- Strength – Minor Axis 7kN
- Weight 86g
- UIAA Certified
- SOLD OUT
Raumer ROCK hanger Ø10 + 2 round rings hanger inox Ø10
- Raumer ROCK hanger Ø10 + 2 round rings
- Hanger inox Ø10
- Stainless Steel AISI 316L Bolt Hanger with 2 x round rings
- 10mm hole for fixing
- Weight: 225 gr
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Usable by 1 person at a time
- Easier rope pull down with double ring
PETZL SHUNT
- PETZL SHUNT
- Easy to install on the rope
- Smooth clamping surfaces won’t damage rope
- May be used to ascend single or doubled rope
- Material(s): aluminum frame
- Weight: 188 g
- Rope compatibility: single ropes 10-11 mm or doubled ropes 8-11 mm
- Certification(s): CE EN 567, UIAA
Petzl St’Anneau Sling 120cm
- Petzl St’Anneau
- Useful 120cm length
- Made in France
- Red/white
- 22kN rated CE UIAA EN566
- Dynema 40g
- Nice and light weight!
Petzl Basic ascender
- Petzl Basic
- Material(s): aluminum frame, stainless steel for the cam, nylon for the trigger
- Weight: 85 g
- For use with single ropes between 8 and 11 mm
- Certification(s): CE EN 567, UIAA
- Made in: France
- Contact pete@accessgear.net

Compact ascender with excellent grip Can be used for rope ascent on a fixed line or as progress capture in a hauling system Toothed cam with self-cleaning slot optimizes performance under any conditions (e.g. frozen or dirty ropes) Stainless steel cam has better resistance to corrosion Lower attachment hole large enough for two carabiners (lanyard and foot loop) Upper connection hole for guiding the rope
Petzl Ascention ( Right hand ascender)
- Petzl Ascention
- Ascender for ascending rope.
- Material(s): aluminum, stainless steel, plastic, rubber, nylon
- Weight: 165 g
- Rope compatibility: 8 to 13 mm
- Certification(s): CE EN 567, UIAA

Designed for ascending a rope Simple to use, and effective: – ergonomic molded handle allows a comfortable yet powerful grip – wide opening allows the handle to be easily grasped, even with thick gloves. – ergonomic upper part to maximize power when pulling with two hands – safety catch is totally integrated into the body of the ascender to help prevent snagging – toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or dirty ropes…) – wide lower hole allows the carabiners of the CONNECT ADJUST lanyard and FOOTAPE or FOOTCORD footloop to be easily attached – upper hole for clipping a carabiner around the rope Available in left-handed and right-handed versions
Beal triple locking carabiner
- Large HMS belaying karabiner with triple action locking gate (3 MATIC).
- Particularly suited to ropework with double ropes (clove hitch and Italian hitch).
- The generous contact surface area enables smooth working of ropes even when wet.
- Keylock system
- Multi use.
- 26 kN (2600 kg)
- 8kN Minor axis
- SOLD OUT
Contact pete@access gear.net
Petzl Croll S
- Petzl Croll S
- Smaller and lighter than the L model
- Stainless steel wear plate improves durability
- Catch is opened by pinching for simple quick manipulation
- Lower hole angled to keep the CROLL chest ascender flat
- Upper hole for attaching a chest strap to keep the rope clamp in position
- Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch
Weight: 85 g
Rope compatibility: 8 to 11 mm
Certification(s): CE EN 567, UIAA - Add one of these https://accessgear.net/products-page/caving-harnesses/av-speleoshoulder/
- Petzls website – https://www.petzl.com/INT/en/Sport/Ascenders/CROLL-S
- Contact here

Description Efficient and easy to use during rope ascents: – used with the BASIC ascender or the ASCENSION handled ascender for rope ascents – lower hole is angled to keep the chest ascender flat – upper hole for attaching a TORSE shoulder strap to keep the ascender in position – catch is opened by pinching, for simple, quick manipulation Reinforced for durability: – stainless steel wear plate for improved durability – stainless steel cam has better resistance to corrosion Adapted for intensive caving: – compatible with ropes measuring 8 to 11 mm in diameter – lightweight, only 85 g – toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes…) Specifications Material(s): aluminum frame, stainless steel cam and wear plate, nylon safety catch Weight: 85 g Rope compatibility: 8 to 11 mm Certification(s): CE EN 567, UKCA, UIAA
Access Gear 2 Ltr Pod Bag (bolt bag)
- Access Gear 2 Ltr Pod Bag (bolt bag)
- Access Gear original bag + option for mesh
- Great for rigging tools/Bolts etc
- Two hanging loops
- Very tough made to last!
- Hooded top for gear security
- 2 ltrs approx
-
As an option ask for mesh on bottom for drainage, Since 2012 Access Gear original.
-
The original, strongest well tested – since 2010.
- Made in New Zealand
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
7 Ltr Pod Bag
- 7 Ltr Pod Bag
- The original bag Since 2010 (Copied but never bettered)
- Now also available with a Bit of pipe for stiffening the top! (See pictures of colour options)
- 3 great options – 1 Solid base 2. Mesh base 3. with pipe for stiffening.
- Great for industrial abseilers
- Two hanging loops
- Two internal loops
- Very tough
- 7 ltrs approx
-
Also available now with mesh on the bottom for drainage, Since 2013, our idea 😉
- Made in New Zealand
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

Please ask for colour choice on the day. Also available with mesh on the bottom for drainage!
Raumer 316SS Resin Anchor 12mm
- Raumer 316SS Resin Anchor 12mm
- Weight: 235 gr
- Dimensions of the shank: Ø 12 x 150 mm
- Static Shear Strenght: 35 KN
- Extraction Static Strenght: 35 KN
- Material: Stainless Steel AISI 316L
- Certifications
Compliance certificate EN 959:2007 – Rock Anchors
Compliance certificate UNI 11578:2015 – type A Anchor
UIAA 123 – 2

Certifications Compliance certificate EN 959:2007 – Rock Anchors Compliance certificate UNI 11578:2015 – type A Anchor UIAA 123 – 2
Kordas 9mm Merce Climbing rope
- Kordas 9mm Merce Climbing rope
- Dynamic Half rope.
- Durable
- Stability (Sheath and core bonded)
- Dry treated
- 2x Colours if available
- Light and flexible
- Great for light weight cows tails
Due to its special features, the MERCE 9 has become a flagship model to make anchoring and positioning lanyards for canyoning and caving activities.
- Diameter 9mm
- Weight per meter 54g
- Weight core 32g
- Core percentage 59%
- Sheath slippage 0%
- Elongation 7,9%
- Impact force 620 daN
- Number of falls 18
- Dynamic elongation 28,9%
- How to tie your own cows tails – https://www.youtube.com/watch?v=Nz3czTQTSa8
- Rated EN 892
- Price per Meter
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
Access Gear/Mesh Throw Bag (the original)
Good canyoning throw bag, or great for arborist work.
The original full draining throw bag since 2010.
- PVC ripstop
- Double internal loops for tying rope off
- Two handles
- Extremely Tough
- Superb drainage
- Stands up alone
- Drawstring top closure
- 320 mm (h) x 250 mm (w)
- 13 litres approx
- White mesh or black mesh.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
- DISCONTINUED WE HAVE BETTER OPTIONS NOW – PLEASE ASK!
MiniMi Pink, Green or Purple
- AustriAlpin
- HMS Carabiner ( smaller than Rondo)
- Pink, Green or Purple
- Ideal carabiner for all-around use.
- Contact pete@accessgear.net

Small, light and practical – the MiniMi is the high-performance little brother of the Rondo. The MiniMi also benefits from a fresh design and the round profile which allows for both fluid and secure rope management. The MiniMi is made with a self-cleaning screwgate and thus combines all positive qualities in a small and usable carabiner model.
Cord lock for 5-7mm cord
- Large cord lock for your all bags
- Will fit 5 – 7mm cord
- Strongly sprung and easy to use
- Upgrade your bag with this.
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
Access Gear Extreme Canyoneering Bag
- The original bomb proof NZ canyon bag! ( Nothing outlasts this bag)
- very well tested throughout NZ for over 7 years.
- Extremely tough plastic mesh – very well draining
- Fully tested by canyon guides throughout NZ
- Double internal loops for tying rope off
- Able to stand up alone for rope packing
- All seams reinforced with extra webbing
- Four drain holes in bottom.
- Double webbing on shoulder straps
- 700 mm (h) x 480 mm (w)
- 44 litres approx
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE
‘Aqua’ Blue ( Canyoning/Canyoneering gear bag)
- Aqua’ Blue ( Canyoning/Canyoneering gear bag)
- Aqua Blue perfect size for general canyoning
- Best for taller canyoners or 180cm + (over 5ft 11Inches)
- Made for best drainage ever (see quality mesh)
- Wear area uses super tough Black material
- Takes kegs and drums perfectly
- Rounded bottom for less wear while climbing down rock/waterfalls
- Sternum strap
- Waist Band
- Hanging loops inside and outside of lid
- Padded shoulder straps
- Pocket inside lid for small gear storage etc. Includes cord loop inside for keys
- Four gear loops inside of bag and one on right shoulder strap
- Padded back
- Extra foam inside pocket in bag. Removable for emergencies etc.
- 72cm h x 20cm d x 31cm w – 45 litres aprox+inside lid space.
- Overseas orders contact pete@accessgear.net
- 1.7kgs Aprox

This new design is lighter These new ‘Aqua’ canyoning bags will cater for you extremely well, with all the features you need in one hard wearing pack.
Petzl Spirit Screw – Lock
- Petzl Spirit Screw lock
- Carabiner optimized for lightness and durability
- very compact shape is ideal for belay stations
- H-shaped cross section offers an improved strength/weight ratio
- wider contact surfaces for better rope glide and reduced wear on the carabiner
- Easy to use, for efficient handling:
- SCREW-LOCK locking sleeve for good handling and effective locking
- Red visual indicator facilitates checking that the carabiner is locked
- nose and Keylock system helps avoid the carabiner snagging during maneuvers
- carabiner designed for better rope glide and to ensure good positioning of the belay device
- shape adapted for easy tying or untying of a clove hitch
Petzl Omni Triact lock
- Petzl Omni Triact lock
- Multi-directional carabiner
- Fasten the harness by joining the two attachment points
- Used for connecting a CROLL ( chest ascender)
- Strength: 15 kN (in all directions)
- Keylock system helps prevent the carabiner snagging during manoeuvres
- TRIACT-LOCK: automatic locking with triple-action gate opening
Access Gear Mesh rope bag 60m/9mm (with flotation)
- Mesh rope bag 60m/9mm
- Sharp new design!
- Takes 50m of 10mm rope or 60m of 9mm easily
- Fits into Access Gear Canyoning bags
- Bright Green Pink or Burnt Orange
- Strong shoulder straps
- Stainless steel eyelets
- Draw cord
- Tie off points inside
- 400mm x 260mm
- Great canyon rigging/rope bag
- 2 x strong handles
- Use as a Super light weight canyon bag.
- Floatation inside – works for most rope, test yours first!
- Bag stands up for flaking rope.
- Overseas orders pete@accessgear.net

If you need a bag that speeds up your canyoning descent this will do the trick. By keeping the rope separate, this bag will allow you to keep rigging efficiently and work as a team. The new design fits into your canyoning bag better than the previous round shape, it also has shoulder straps now! Floating/non-floating options; with/without straps contact for orders!
Raumer hammer hex convertion
- Converts 13mm (8mm bolt) to 17mm (10mm bolt) hex
- Fits on the Raumer hammer
- Alan key fitting 2 mm hexagonal key with chrome vanadium
- The adaptor is extremely easy to install, using all the tools provided in the kit:
Access Gear Mesh rope bag 30m (With flotation)
- Access Gear Mesh rope bag 30m (With flotation)
- Sharp new design! .
- Takes 30m of 10mm rope or 40m of 9mm easily
- Fits into Access Gear Canyoning bags
- Bright Green or vivid Blue
- Stainless steel eyelets
- Draw cord
- Tie off points inside
- Great canyon rigging/rope bag
- 2 x hanging handles ( no shoulder straps on this one)
- Floatation inside – works for most rope, test yours first!
- Bag stands up for flaking rope.
- Overseas orders pete@accessgear.net

If you need a bag that speeds up your canyoning descent this will do the trick. By keeping the rope separate this bag will allow you to keep rigging efficiently and work as a team. The new design fits into your canyoning bag better than the previous round shape.
Maillon Rapid Delta 7mm Stainless Steel (PPE)
- Stainless Steel
- 7mm Delta
- 59 grams
- Breaking Load 31kN
- Certified PPE – Individual number!
- The only Delta with a EN cert!

Delta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.
Access Gear Mesh Expedition Bag (Updated 3/12/18)
- Access Gear Mesh Expedition Bag
- Better than ever
- These have been used for 9 years across New Zealand’s wild canyons.
- Hardest wearing mesh available
- Sits flat on your back unlike a sack!
- Hardest wearing material on Base area for the ultimate wear resistance.
- Handle on front
- Colours available on request.
- Padded Shoulder straps
- Padded Waist band
- Hanging loops inside and outside of lid
- Internal floatation
- Hard Wearing Mesh on back of bag
- Zipped Lid with mesh for drainage
- Stainless Steel eylets
- 4 Internal Loops
- Extra pocket inside/Rope Store, floatation etc
- 700 mm (h) x 450 mm (w)
- 50 litres approx + 5 litres in lid
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
- Made in New Zealand by us
- Why compromise.
- Review Here
- Purpose made for canyoning.

The first all mesh bag available that we know of – since 2013. With all this mesh, this bag is free draining to say the least! Contact us for available colours. Tried and tested design throughout New Zealand’s wild canyons Simply the highest draining canyoning bag. Ask anyone who owns one about the quality of these. Made for canyoning!
Bolting hammer (Raumer)
- Bolting hammer (Raumer)
- Used for bolting of Climbs Caves or canyons
- Pitch rigging
- Beautifully crafted nicely balanced solid hammer
- Rubber handle
- Stainless steel shaft with 3mm cord 1.5 m long as leash
- Weight: 600 grams
- Length: 26 cm
- Well balanced
- https://www.youtube.com/watch?v=vScT05QfSUY
- 2 x Hex head fittings 13mm plus with the possibility of an 17mm adaptor for bottom hex (extra $22) see above https://accessgear.net/products-page/extras/raumer-hammer-hex-convertion/
Access Gear Expedition Canyoning Bag 2 (Updated 3/12/18)
- Access Gear Expedition Canyoning Bag 2
- Updated and better than ever.
- Lighter in weight but just as tough!
- Simply the toughest bag available.
- Fully tested throughout NZ for over 9 years!
- Handle on front
- Red Or Yellow or Blue
- Padded Shoulder straps
- Padded Waist band
- Hanging loops inside and out of lid
- Internal floatation
- Hardest Wearing Mesh ever
- Zipped Lid with mesh for drainage
- Extra piping for strength on bottom
- Stainless Steel eyelets
- 4 Internal Loops
- Extra pocket inside/Rope Store, more flotation etc
- 700 mm (h) x 450 mm (w)
- 45 litres approx + 5 litres in lid
- OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE
- Made in by us in New Zealand
- The original bomb proof canyoning bag that lasts, tried and tested for over 7 years.
- Superb quality, why compromise?
- From the grass roots of NZ canyoning
- Review here

This bag has all of the extras that you have asked for – Extra loops inside – there are now four. A new heavy duty grab handle on the front of the bag. Made from the best hard wearing material available. Not justa sack on ya back! Made for one purpose – CANYONING!
Raumer Stainless Steel RING Ø10mm
- Raumer Stainless Steel RING Ø10mm
- Abseil ring Stainless steel AISI 316L ring
- Welded with TIG (Tungsten Inert Gas)
- Inner diameter = 32 mm.
- Cost effective option other than a Stainless Steel maillon.
- Tie on rope or webbing for descending.
- Weight = 82 gr
- R = 40 KN
- 10mm for frequently visited canyons/caves because its super hard wearing.
- Overseas orders contact pete@accessgear.net
Raumer Stainless Steel RING Ø8mm
- Raumer Stainless Steel RING Ø8mm
- Stainless steel Ø8 mm AISI 316L ring
- Welded using TIG (Tungsten Inert Gas)
- Internal diameter of 23mm.
- Smooth and polished
- Weight: 40 gr
- R= 30 kN
- Makes for an easy clean rope pull down!
- 8mm for infrequently visited canyons/caves

Useful for decsending canyons and caves if threaded onto rope or rated webbing. Makes for an easy clean rope pull down Cheaper option than stainless steel maillons! 316L SS
Arborists Pod Mesh bag
- Arborists Pod Mesh bag
- Very well tested bag
- Very tough
- Original Access Gear idea/model now remade because of demand.
- 430mm x 250mm Handles your 60m line with ease.
- Super tough mesh on bottom section
- Shoulder straps – adjustable
- Corded Hood on top to stop debris etc.
- Tough quality you can rely on.
- Orange, Yellow or Red if available!
- The original – Don’t accept copies, this is it!
Made to last, some of our original models are out there from well over 10 years, still going hard out. - Contact pete@accessgear.net

The original – Don’t accept copies, this is it! Made to last, some of our original models are out there from well over 10 years, still going hard out.
MINI CANYONING rope bag
- Takes 30m of 8.5mm rope Or pull cord bag 60m+
- Based on our other quality rope bag
- 2 x Red loops inside for tying rope off.
- Fast draining
- Genuinely well made and very tough! Can be made from even more robust materials to order.
- Single loop for clipping to carabiner
- floatation inside (other options available for lighter weight)
- Handles 60m+ of 6mm pull cord – depending on the stiffness of your cord it will take lots more.
- Eyelet in bottom
- Closes tightly with eyelets and cord. No added hood to get in the way when flaking your rope.
- Red is standard.
Size H310mm x W220mm x D150mm
Contact pete@accessgear.net

Another well thought out very tough bag. Based on our other rope bags with the best materials that have been well tested for years. Floatation is standard, but is up to you – Please ask if you require non floating bags. Made to order. Used in canyons for rope management the simple single loop is all that you need to clip on to your harness. Other uses include SAR, arborists, riggers etc, anyone who need a tough free draining small bag.
13mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 13mm spanner
- Fits 8mm bolts
- Weight: 60 gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down.

A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Bolting bag/Surveying bag
- Bolting bag/Surveying bag
- Velcro and buckle closure (no loss of equipment)
- Loops inside for bolts
- Internal elastic loop for hammer
- Hammer kept inside of bag (Hammer not included)
- Drill bit compartment – takes 200mm+ long drill bits!
- Adjustable shoulder strap with stainless steel buckle
- Belt loop to clip on harness
- 25cm x 25cm x 7cm approximately. (not too big, not too small)
- Other specific options (just ask)
- Makes a perfect surveying bag or bolting bag
- Mesh option for canyon bolting!! (Another first from Access Gear we believe)
- Colour options on request.
- Contact pete@accessgear.net

After using various methods/bags/pockets etc for bolting in caves and canyons, we have put all these ideas together to make a specific bag that really is designed for purpose. Not too big, not too small, with velcro and buckle closure, it holds your gear where you need it, inside the bag! This bag doubles as a perfect surveying bag – material options available to suit your needs. We generally use heavy duty materials due to its contents for bolting, but surveyors will be happy with a lighter weight version. Let us know what you want, we will make a bag to suit your job!
17mm Ring Spanner with cord attached
- 17mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 17mm spanner
- Fits 10mm bolts
- Weight: 120gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down.

A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Access Gear Double ended rope bag
- Access Gear Double ended rope bag
- UPDATED 11/22
- Mesh bag for massive drainage
- Simple shoulder straps/flip straps
- Strong Hanging loops either end of bag
- Bag can be flipped for access to other end of rope for speedy use.
- Fits 60m of 9mm easily or 60m x 10mm at a push
- Fits perfectly into an Access Gear canyoning bag – Floatation now included!
- https://accessgear.net/products-page/bags-and-extras/canyoning-pack-extreme-2-new-11012/
- Other sizes made to order – just ask

A simple well made bag, with 2 x ends for speedy access to your rope!! Massive drainage to avoid carrying weight of water. 🙂
19mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 19mm spanner
- Fits 12mm bolts
- Weight: 115 gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down

A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Wetsuit protection (Bum Protector)
- Made by us in NZ
- Protection when sliding whilst canyoning
- Saves wetsuit damage
- 25mm join for longer lasting
- Heavy duty fabric
- Will fit harnesses up to 60mm webbing.
- Welded for strength!
- A must for every canyoner
- Updated now 15/10/19
- This fits very well – no flappy bits!
- 2 sizes available s/m or m/l
Contact pete@accessgear.net with any questions
Petzl Connect Adjust
- Petzl Connect Adjust
- Length: 15 – 95 cm
- Weight: 125 g
- Certification(s): CE, UIAA 109
- Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
- Single positioning lanyard with adjustable arm
- The ADJUST rope adjuster’s ergonomic shape offers quick, precise adjustment
- Lanyard adjusts from 15 to 95 cm
- The connector is held in position by a rubber ring, to facilitate clipping
- Dynamic rope lanyard
- More info – https://www.petzl.com/INT/en/Sport/Lanyards/CONNECT-ADJUST

to reduce the force transmitted to the user in the event of a short fall (1) Used with a locking carabiner Attaches to the belay loop of the harness with a girth hitch (1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
Petzl Paw
- Petzl Paw
- For easily organizing the work station and creating multi-anchor systems
- 19 mm holes allow the locking sleeves of most carabiners to pass through
- made of forged aluminum for an excellent strength-to-weight ratio
- durable markings, thanks to the recessed area in the center of the plate
- Available in Gold
- Material(s): aluminum
- Breaking strength: 36 kN
- Certification(s): CE, NFPA 1983 General Use
- OVERSEAS ORDERS OR BANK DEPOSITS –
- PLEASE ENQUIRECLICK HERE
Polyglut (wetsuit repair and seamsealer)
- Wetsuit seam sealer and coating for wear resistance
- Use on Neoprene or Nylon
- Seam seal caving overalls
- For knee protection, build up three layers for robust protection
- Designed to reinforce and protect knees, elbows and sewing lines
- 100ml
Fenix HM65R
- Fenix HM65R
- Amazing value for powerful headlamp or back up caving lamp
- Independant Spot and floodlight by way of two easy to operate buttons
- Cree XM-L2 U2 white, XP-G2 R5 neutral white LED, with a lifespan of 50,000 hours.
- Powered by one 18650 (Supplied) rechargeable Li-ion battery or two 3V/CR123A batteries
- Constant current circuit guarantees longer runtime
- Dual top switches for easy and fast operation
- USB Type-C charging, 1.5A large current
- Quality aluminum, magnesium and PC material, lightweight and durable
- Waterproof IP68
- Toughened ultra-clear glass lens with an anti-reflective coating
- 3.17″ Length x 2.17″ Width x 1.57″ Height (80.5 x 55x 40 mm)
- 3.42 oz / 97 grams (excluding battery)
- Runtimes here – hm65r-spec-chart
- For runners look at the – https://accessgear.net/products-page/lamps-and-spares/fenix-headlamp-hm65r-t/

HM65R Weight: 3.4 oz. (97g) excluding battery HM65R Battery: One included 18650 rechargeable Li-ion battery or two CR123A batteries Included: ARB-L18-3500 rechargeable li-ion battery, headband, top headband, headband mount, spare O-ring, USB Type-C charging cable An Amazing headlamp with extremely bright leds. Camping, clamping, caving, climbing, this fits on a helmet or directly to your head. A must for adventureres.
Petzl Dual Connect Adjust
- Petzl Dual Connect Adjust
- An Adjustable double lanyard!
- Fixed arm length: 45 cm
- Adjustable arm length: 15 to 95 cm
- Weight: 160 g
- Certification(s): CE, UIAA 109
- Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
- Contact pete@accessgear.net

Adjustable double lanyard allows users to tether themselves to an anchor and install a rappel system in multi-pitch climbing and mountaineering Double lanyard with one fixed arm and one adjustable arm: – 45 cm fixed arm – 15 to 95 cm adjustable arm – the ADJUST rope adjuster’s ergonomics make it easy to manipulate, for quick and precise adjustment of the adjustable arm – dynamic rope lanyard, to reduce the force transmitted to the user in the event of a short fall (1) Easy to use: – the connector is held in position by a rubber ring, to facilitate clipping – one-handed adjustment – used with two SPIRIT SCREW-LOCK-type locking carabiners – attaches to the belay loop with a simple girth hitch (1) For use below the anchor point: positioning lanyards do not have an energy absorber. These lanyards must only be used when the potential fall factor is less than 1.
AV Fornocal trousers ( Canyoning or Caving)
- AV Fornocal trousers
- Complement to the Taka canyoning jacket
- Use this combination for caving, canyoning.
- Great for prospecting for caves
- Polyamide coated trousers for protection of the neoprene canyoning suit.
- Buttock reinforcement without central stitching, + knee reinforcement.
- Velcro fastening with nylon clip together belt to hold ya pants up!
- Wear resistant material (used for caving suits)
- Sizing available S/M/L
- Weight 600 g
- Blue/Black

Whilst wondering around in the bush its a great thing to be wearing a pair of resistant trousers that you can also use for caving + canyoning – Sorta makes sense really. These compliment the Taka jacket.