MTDE Amazonia 2 Caving harness
- MTDE Amazonia 2 Caving harness
- Very hard wearing webbing protected by removable PVC reinforcements.
- The Amazonia harness has a very low attachment point.
- 4 strong gear loops in Dyneema/Polyamide mix
- Waist Band is adjustable 44 mm webbing.
- Thighs and seat strap: adjustable support 28mm
- Colours: black / blue.
- One size fits all. (most)
- Maximum waist circumference: 112 cm.
- Weight: 596 g.
- CE 0082 EN12277 Type C
- Add a central D https://accessgear.net/products-page/carabiners-and-maillon-rapides/carabiner-triad-3lock/
- Full review here https://www.youtube.com/watch?v=SR4w72Fm1Xg
- Contact pete@accessgear.net for info.
MTDE Amazonia 2 Caving harness
Likely the most popular caving harness out there for good reason.
Super hard wearing with a very low attachment point for efficient ascending.
The added butt strap makes for more comfort whist ascending.
Middleweight, comfortable and very effective sit harness.
Solid 26mm tape on bumstrap and leg loops (all fully adjustable) gives surprisingly good support- although initially it can feel rather odd! Low central attachment point aids efficient prussiking. Four tape gear loops (two each side), the Amazonia integrates with the Garma chest harness to make an effective set up for rigging, climbing, and general SRT intensive trips.A very nice harness for those wanting a bit more support on rope.
More Details
Likely the most popular caving harness out there for good reason. Super hard wearing with a very low attachment point for efficient ascending. The added butt strap makes for more comfort whist ascending. Middleweight, comfortable and very effective sit harness. Solid 26mm tape on bumstrap and leg loops (all fully adjustable) gives surprisingly good support- although initially it can feel rather odd! Low central attachment point aids efficient prussiking. Four tape gear loops (two each side), the Amazonia integrates with the Garma chest harness to make an effective set up for rigging, climbing, and general SRT intensive trips.A very nice harness for those wanting a bit more support on rope. Possibly the best suited for narrow and gnarly caves, because it is quite low profile and tends to sit in place when worn, so it is less likely to catch up on projections. Solid 26mm tape on bumstrap and leg loops (all fully adjustable) gives surprisingly good support- although initially it can feel rather odd! Low central attachment point aids efficient prussiking. Four tape gear loops (two each side), the Amazonia integrates with the Garma chest harness to make an effective set up for rigging, climbing, and general SRT intensive trips. A very nice harness for those wanting a bit more support on rope.
MTDE Club harness
- MTDE Club harness
- A certified harness – CE 0082 EN12277 Type C
- A simple, very strong harness made for caving.
- Incredibly well made.
- Waist-belt and leg loops made from 44-mm webbing.
- Totally adjustable.
- 2 strong equipment loops, one on either side.
- Weight: 320 g. Lightweight
- One size fits all – Maximum waistbelt size 112 cm.
- Perfect for beginners or a great lightweight option for experts in gnarly caves!
- Add a central D https://accessgear.net/products-page/karabiners-and-maillon-rapides/triad-3lock-camp/
- For more info contact pete@accessgear.net
- Some more info here – https://www.youtube.com/watch?v=SR4w72Fm1Xg
More Details
A strong sit harness for caving. Fully adjustable leg loops and belt. Surprisingly comfortable 🙂 Created for club / outdoor centre use, but also well suited for narrow and arduous caves, or those where horizontal passage predominates. 44mm webbing throughout, with two gear loops, one each side. One size fits all, and it the upper range is good for around 40″ waist. Very convenient for group use. Competitive price for a harness which is very solidly put together from excellent materials – as with all MTDE kit!
MTDE Varonia harness
- MTDE Varonia harness
- A very hard wearing caving harness with webbing protected by removable PVC reinforcements.
- This harness has a very low attachment point.
- 4 strong gear loops in Dyneema/Polyamide mix
- Waist Band is adjustable 44 mm webbing.
- Thighs and seat strap adjustable 44mm and 26mm webbing
- Colours: black / blue.
- One size fits all. (most)
- Maximum waist circumference: 112 cm.
- Weight:610g.
- Amazing quality.
- CE 0082 EN12277 Type C
- Add a central D https://accessgear.net/products-page/karabiners-and-maillon-rapides/triad-3lock-camp/
- Full review here https://www.youtube.com/watch?v=SR4w72Fm1Xg
- Contact pete@accessgear.net for info.
More Details
The intermediary MTDE caving harness. Like the Amazonia the Varonia has a low attachment point. The extra bum strap spreads the load whist ascending and is movable when walking in horizontal passages. Belt and buttocks strap adjustable, support 44 mm. Thighs: adjustable, supports 26 mm. Gear loops in Dyneema: 3 fixed (in webbing with safety seams: 2 per side). Protections: removable PVC, webbing protection thigh and buttocks. Color: blue / black. Size. Max belt circumference: 112 cm. Weight: 620 g.
AV Mazerin Harness
- AV Mazerin Harness
- Canyoning and Caving harness
- Designed for the canyons of La Reunion island
- For easier PPE monitoring, each personal protective equipment has an individual number on the year of manfacture label.
- Individually numbered harness with a honest certification CE, EN 12277+A1 :2018 TypeC https://www.aventureverticale.com/en/canyoning/sit-harness-avca04.html
- Extremely good seated position very comfortable harness
- Made for vertical Canyoning/Caving
- low attachment point because ascending is way easier (when needed)
- Add D shape triple locking carabiner https://accessgear.net/products-page/carabiners-and-maillon-rapides/carabiner-triad-3lock/
- Comes with bum protector included!
- Comfort belt is an extra for those that need a little more.
- Sizes available please ask! pete@accessgear.net
- AV Mazerin Harness sizing –
- XS-M: maxi waist 95 cm (yellow attachment point)
ML: maximum waist circumference 115 cm, (blue attachment point)
XL: maximum waist circumference 135 cm (purple attachment point) - Monitor harness with a pants-shaped protection, an integrated knife-holder and a tie designed especially for bags. Efficient for both canyoning and caving.Designed according to the size and vertical height of the steep canyons on the Island of Reunion but also to meet the requirements and needs related to daily supervision, the Mazerin has been created for professionals who often use the rope climbing up system.Like a seat harness, the pant-shaped protection helps you to remain in a well-seated position while suspended in the air for long periods of time.The mobile leg loops that maintain the butt support strap in place are quick to take on and off, and relieve the groin from friction during approaches, exits, or transitions.Tried and tested over many years and on several expeditions, this monitor sit-harness, with its strap to hold knives, its strap provided especially for bags, has proven its ability to perform for both canyoning and caving.
More Details
After trying this AV Mazerin harness on, I realised how I have been wearing an uncomfortable harness for many years! A must for canyoning.
Bear Claw (alternative) Axe Aventures knife
- Bear Claw (alternative) Axe Aventures knife
- Stainless Steel SS 420
- A solid emergency knife option for canyoning
- Similar to the CRKT Bear Claw. Made by French company Axe Aventures
- Almost identical in size.
- Comes in its own box including 2 x zip ties and silicon grease.
- Buy a strong lanyard here – 40kgs breaking is a lot! https://accessgear.net/products-page/all-products/bear-claw-lanyard/
- Or make your own lanyard…..
MTDE Garma Chest Harness
MTDE Garma Chest Harness:
MTDE set out to make one of the best chest harnesses on the market. Short story: they succeeded. The Garma has the same amazing stitching exemplified on their world class sit harnesses. This chest harness is geared towards aid climbs and extremely vertical caves; however, it also tackles the basic needs of a SRT chest harness with ease. This harness is intended to be singularly connected to the ventral attachment point on a standard SRT seat harness.
*Not PPE. Compulsory use with caving sit-harness.
Looking for a more economical option? Check out AV’s Spelshoulder Pro Chest Harness.
Review here https://www.youtube.com/watch?v=SR4w72Fm1Xg&t=3s
Contact pete@accessgear.net
AV Spelshoulder PRO
- AV Spelshoulder PRO
- Chest harness for caving.
- 38mm comfortable chest straps.
- Adjustable by a double loop.
- Preferred by Women – this model compared to the simple version AVSP12 because it can be positioned higher.
- Not PPE. Compulsory use with caving sit-harness
- 185 g
- Contact pete@accessgear.net
AV Speleoshoulder
- AV Speleoshoulder
- One size fits all chest harness for caving. Not PPE.
- 38mm webbing for comfortable chest strap, each adjustable by a double loop.
- Four webbing loops for hanging small caving equipment (wrench, etc…) or lanyards.
- The chest ascender is held by a narrow central strap.
- “Use with a sit-harness”
- contact pete@accessgear.net
Petzl Superavanti (New 2021)
- Reinforced for durability:
– leg loops reinforced with thermoplastic polyurethane (TPU) for greater resistance to abrasion
– gear loops in extremely durable high-modulus polyethylene (HMPE)
– high-strength polyester webbing retains smooth adjustment qualities over time
– attachment points entirely reinforced in high-modulus polyethylene (HMPE), for great durability
– rear buckle with wear protector webbing flap - Efficient rope ascents:
– rope ascent efficiency is optimized, thanks to the lower position of the attachment points
– two gear loops on each side, for transport and organization of gear - Adapts to any body type:
– comes in two sizes, allowing you to switch from a children’s size to an adult size
– extensive waistbelt and leg loop adjustment options to fit a wide range of users
– differently colored safety stitching, for quick identification of harness size (yellow stitching for Size 1, black stitching for Size 2) - SIZING BELOW or contact pete@accessgear.net
More Details
Color(s) orange/black orange/black Size 1 2 Waist belt 60-95 cm 90-105 cm Leg loops 42-62 cm 52-72 cm Weight 410 g 450 g
MURUCK (Caving harness) AV
- A very Comfortable Caving Harness
- French styling
- CERTIFIED, EN 12277 Type C
- Very high abrasion resistant strap, with a special weaving
- One sheathed gear loop and a mobile webbing gear loop
- This caving harness is easily adjustable.
- Removable protection in PVC for the thighs.
- 01 XS-M: waist from 55 cm to 75 cm and thigh loop from 45 cm to 60 cm (yellow tie-in sheathing) Not always available. Please ask!
- 02 M-L: waist from 55 cm to 100 cm and thigh loop from 55 cm to 70 cm (blue tie-in sheathing) Not always available. Please ask!
- 03 XL: waist from 55 cm to 125 cm and thigh loop from 65 cm to 80 cm (mauve tie-in sheathing) Not always available. Please ask!
- pete@accessger.net
More Details
Sit-harness for caving. Totally adjustable, at waist band and thighs, by steel ladder lock buckles. Two lower sheathed tie-in point for a good performance climbing up the rope. Special 44mm webbing with very high abrasion resistance and special weaving. One colour per size. A fixed and a mobile sheathed gear loop in flat webbing. Removable PVC reinforcement for the thighs (reference AVCA45 Thighprotect). This caving sit-harness is perfectly suitable for collective use as easy to adjust.
Cowstail double 60cm/30cm
NO LONGER SOLD as it is potentially unsafe – we have better options available, please ask.
Petzl Torse
- Petzl Torse
- Simple construction
- Rapid buckle facilitates placement and removal of the strap on the harness
- DoubleBack buckle for quick, precise adjustment
- Superior quality webbing for excellent durability
More Details
Specifications Material(s): aluminum DoubleBack adjustment buckle, plastic rear buckle, abrasion resistant polyester webbing References References C26 2 Weight 90 g Guarantee 3 years Packing 1