Vertical Evolution 10mm Canyoning hanger
- Vertical Evolution – 10mm Canyoning hanger
- CERTIFIED EN 959
- Radial 32kN
- Axial 22kN
- Light weight! 65gr
- Stainless steel AISI 316L
- Can effectively be used with concrete screws
- Tie directly into the hanger
- perfect for expedition rigging in caves or canyons
- Pulldown the rope easily whist canyoning.
- Rescue opps as part of a 3 point anchor system.
More Details
Vertical Evolution – 10mm Canyoning hanger is the simple quality all round answer for your rigging in caves and canyons.
Petzl COEUR PULSE 12mm
- Petzl Coeur Pulse
- Material(s): 316L stainless steel
- Certification(s): CE EN 795 B
- Reusable
- 12mm x 60mm
- Easy to use:
– simple, rapid installation and removal, without tools, allowing it to be reused
– locking function limits the risk of involuntary removal - Easy clipping:
– the wide, ergonomic connection hole facilitates carabiner clipping
– the width of the hole allows installation of two carabiners at the same time - Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection holeNB : For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges
-
Contact pete@accessgear.net
More Details
– simple, rapid installation and removal, without tools, allowing it to be reused (1) – locking function limits the risk of involuntary removal Easy clipping: – the wide, ergonomic connection hole facilitates carabiner clipping – the width of the hole allows installation of two carabiners at the same time Prevents wear of carabiners thanks to the thickness of the hanger and the rounded edges of the connection hole Hanger anti-rotation system: textured back keeps the hanger from turning when the anchor is being installed or when it is heavily laterally loaded during use (1) For optimal use of the anchor, the hole must be perfectly cylindrical. To this end, opt for a drill bit with three or four cutting edges.
Anellox 12mm hanger (offset)
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 12 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for availability pete@accessgear.net
Raumer Anellox 10mm hanger
- Raumer Anellox 10mm hanger
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 10 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for bulk buy pete@accessgear.net
More Details
The Raumer Anellox 10mm hanger is the revolutionary new anchor designed to be used with very long bolts or screws Multi Monti. New form that allows a precise and comfortable housing of the bolt in the anchor, speeding up the work. Totally new shape has been designed with a new radius that allows multidirectional traction; you can indeed use it in the three directions, unlike with the old model it is also ideal for equipping roofs or overhangs. It allows the creation of complex rigging systems. The 10 mm hole means it can be attached to the rock using expansion bolts or M10 screw anchors
TRIPLE CHAIN Ø6 L= 37cm A316L
- Raumer 6mm triple chain links for permanent anchor stations and joining hangers together
- 37cm long
- Connect this chain using 2 x stainless steel maillon’s
- Great for connecting anchors or replacing rope/webbing anchors with these permanent anchors
- Durable and suitable for all environments. Like all Raumer anchors, since 2013 made exclusively in AISI 316L Stainless Steel.
- Finished in a pale grey to lessen the visual impact.
- This chain can be clipped by 2 persons simultaneously
- Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
- Weight = 186 gr
- Contact pete@accessgear.net
DOUBLE CHAIN Ø6 L= 25cm A316L
- Raumer 6mm double chain links
- 25cm long
- Connect this chain using 2 x stainless steel maillon’s
- Great for connecting anchors or fixing rope/webbing anchors that need replacing with permanent anchors
- Durable and suitable for all environments. Like all our anchors, since 2013 made exclusively in AISI 316L.
- Finished in a pale grey to lessen the visual impact.
- Chain can be clipped by 2 persons simultaneously
- Weight = 125 gr
- Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
- Contact pete@accessgear.net
Allenox 8mm hanger (offset)
- Material: AISI 316L stainless steel wire 8 mm and hole Ø 8 mm
- Weight: 70 grams
- Dimensions: 21 x 60 x 45 mm
- Static Shear Resistence: 25 KN
- Extraction Static Strenght: 20 KN
- CE EN 795:2012 – Anchor type A
- Complies with EN 959:2007 – Rock Anchors
- UIAA 123-2
- Offset for easier application
- Tie rope/webbing straight into these and lighten your load, no need for a carabiner!
- Great with screw in anchors too. https://www.youtube.com/watch?v=cSbvIftsNyI
- Contact for bulk buy pete@accessgear.net
More Details
You can use it in the three directions, and is also ideal for equipping roofs or overhangs. This anchoring ring is very appreciated in caving and rescue because it allows the creation of complex rigging systems.
Raumer Hanger 10mm
- Raumer Hanger 10mm
- Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality.
- Plate for multi directional traction.
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Material: Stainless Steel AISI 316L
- Made in Italy
- Marine version also available now!
- Contact for bulk buy pete@accessgear.net
More Details
Plate that has become a classic in the mountaineering and climbing world. Ideal for climbing, mountaineering and rescue. Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality. Plate for multi directional traction. Wide hole that allows two carabiners to be inserted easily and simultaneously Surface made in an opaque matt grey which makes the hanger as invisible as possible, thus reducing the environmental impact. Low Cost.
Hanger 12mm 316L Stainless Steel
- 12mm hole
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Material: Stainless Steel AISI 316L
- Made in Italy
- Certified UIAA 123-2 Rock anchor
- Contact for bulk buy pete@accessgear.net
More Details
Certifications CE EN 795:2012 – Anchors – type A Complies with EN 959:2007 – Rock anchors UIAA 123-2
HCR Hanger 10mm (For Marine environments) Best resistance ever!
- Highly resistant to saline corrosion: Also called HCR
- The anchors have been marked with a fish symbol and the initials “INOX”.
- Weight: 44 gr
- 3.5 mm Thick:
- Dimensions: 35 x 60 mm
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- CE EN 795:2012 – Anchors – type A
- Complies with EN 959:2007 – Rock anchors
- UIAA 123-2
- Made in Italy
- Marine version!!!! HIGH CORROSION RESISTANCE or HCR
- Contact for bulk buy pete@accessgear.net
More Details
This Raumer hanger has become a classic in the mountaineering and climbing world. Ideal for climbing, mountaineering, caving, canyoning and rescue. Widely used on nearly every sport crag in the world, it is chosen for its durability, practicality. Hanger for multi directional traction. Now in this ‘Marine’ version for a longer lasting option in the harshest environments!
Bolts for climbing
- Bolts for climbing (May vary from picture)
- 10mm x 86mm DUPLEX
- 316 Stainless Steel DUPLEX Expansion bolt (Certified)
- Certified https://fiproductmedia.azureedge.net/media/Certification%20Documents/ETA%20European%20Technical%20Assessment/fischer/ZD_ETAB_F_07-0211-1_SEN_AIP_V1.pdf
- Performance documentation
- https://fiproductmedia.azureedge.net/media/Certification%20Documents/DOP%20Documents/fischer/ZD_DOP_EN_FBN-II_DOP-0192_ETA-07_0211.pdf
- New Zealand Speleology Society – Members subsidy contact pete@accessgear.net with your NZSS Number
- Bulk buyers pete@accessgear.net
- Other bolts available just ask.
- Just add a 10mm hanger https://accessgear.net/products-page/climbing-hangers-and-bolts/hanger-10mm-316ss/
Petzl PULSE 8mm
- Petzl PULSE 8mm
- Caving anchor.
- Quick to use:
- Material(s): stainless steel, aluminum
- Certification(s): CE EN 795 B
- Drilling diameter 8mm
- Drilling depth 5 cm
- instantly placed by activating the release plunger
- anchor is completely removed by pressing on the release plunger and pulling on the hanger
- easy to install and remove
– locking wrench for extended use or use with groups
– twisted hanger designed to hold the connector parallel to the wall
– interchangeable hanger - More responsible equipment practice for caving:
– the anchor does not rust underground
– the condition of the anchor can be checked - https://www.petzl.com/INT/en/Sport/Anchors/PULSE
Raumer Belay Station 10mm + Ring 316 SS
- Raumer Belay Station 10mm + Ring 316 SS
- Click on photo for full picture.
- Material: Stainless Steel AISI 316L
- Weight: 296gr
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- CE EN 795:2012 – Type A anchors
- Complies with EN 959:2007 – Rock Anchors
- UIAA
More Details
Raumer Belay Station 10mm + Ring 316 SS is a High quality certified stainless steel 316 belay station.
Raumer Double chain Belay Station + Two rings
- Raumer Double chain Belay Station + Two rings
- Double chain belay station
- Stainless steel AISI 316L, which offers a higher resistance to marine corrosion than AISI 304.
- Radial R = 27 kN Extraction R = 25 kN Weight = 590 gr
- Drill Ø10mm
- 2 Chains and 2 Round Rings Ø10
Multi Monti Plus Screw Anchor Ø10×80 Zinc/Nickel coated (Latest version)
- The original screw anchor now with better upgraded model
- Drill Ø 8mm hole with quality drill bit!
- Ø 10mm x 80mm
- Now with more holding power and larger thread
- longer lasting leading cutting edge, way better than others for ease of use
- Zinc/Nickel coated for better resistance
- 13mm hex head
- Works perfectly with Allenox 10mm
- Build strong removable anchors.
- Reusable – Not more than 3 times!
More Details
MULTI-MONTI anchors are a innovative self-threading screw system, and are highly resistant and practical. The first part of the Multi-Monti thread is characterised by thread serration / teeth. When screwed, the anchor cuts into the material and creates the space for the rest of the screw. Unlike traditional screw anchors, the Multi-Monti system does not exert excess tension on the material, reducing the risk of damage or breakage. The Multi-Monti system also differs from traditional permanent mechanical or resin anchors in that it can be easily unscrewed and reused. This procedure should not be employed more than three times on rock and only once on granite.
Ring Hanger 10mm
- Ring Hanger 10mm
- The most popular ring hanger out there
- 316L Stainless Steel
- Plate bent at 40°
- Stainless Steel Round Ring Ø 10 mm bolt needed
- The internal diameter of the ring is an optimum 32mm, designed to save weight and bulk without impacting on versatility.
- The ring hangs perpendicular to the face which means top-roping systems can be set up on either side and rope retrieval is easy: a very worthy advantage!
- Low friction rope retrieval as the weight is spread over 360°.
- Made in Italy
- Contact for bulk pricing pete@accessgear.net
More Details
A very popular Ring Hanger 10mm used for mountaineering, climbing and canyoning anchor, used to equip simple, efficient and secure belays at a very competitive price. Used in pairs (for obvious safety reasons); usually with one as the load-bearing anchor and the other as a passive back-up. CE EN 795:2012 – Anchors type A Complies with EN 959:2007 – Rock anchors Weight: 132 gr Thick: 3,5 mm Dimensions: 44 x 92 mm Static Shear Strenght: 25 KN Extraction Static Strenght: 29 KN Usable by 1 person at a time UIAA 123 – 2
Camp Safety Tooler
- Camp Safety Tooler (made in France)
- Tool-holding lanyard consisting of elastic strap (length: 85-120cm)
- The ideal solution to hold any tool safely (maximum weight 10kg) while working at height
- Tooler must never be used as a safety lanyard
- Weight – 40g
Raumer ROCK hanger Ø10 + 2 round rings hanger inox Ø10
- Raumer ROCK hanger Ø10 + 2 round rings
- Hanger inox Ø10
- Stainless Steel AISI 316L Bolt Hanger with 2 x round rings
- 10mm hole for fixing
- Weight: 225 gr
- Static Shear Strenght: 27 KN
- Extraction Static Strenght: 26 KN
- Usable by 1 person at a time
- Easier rope pull down with double ring
Raumer 316SS Resin Anchor 12mm
- Raumer 316SS Resin Anchor 12mm
- Weight: 235 gr
- Dimensions of the shank: Ø 12 x 150 mm
- Static Shear Strenght: 35 KN
- Extraction Static Strenght: 35 KN
- Material: Stainless Steel AISI 316L
- Certifications
Compliance certificate EN 959:2007 – Rock Anchors
Compliance certificate UNI 11578:2015 – type A Anchor
UIAA 123 – 2
More Details
Certifications Compliance certificate EN 959:2007 – Rock Anchors Compliance certificate UNI 11578:2015 – type A Anchor UIAA 123 – 2
Raumer Marine grade stainless steel Ø10
- Raumer Marine grade stainless steel Ø10
- Marine grade P anchor!!
- Weight: 148 gr
- Dimensions of the shank: 10 x 120 mm
- Static Shear Strenght: 30 KN
- Extraction Static Strenght: 30 KN
- Usable by 1 person at a time
- Warranty: 3 years
- Certifications
- Compliance certificate EN 959:2007 – Rock Anchors
- Compliance certificate UNI 11578:2015 – Devices type A
- UIAA 123 – 2
More Details
“MARINE” Version , highly resistant to saline corrosion. These anchors have been marked with a fish symbol and the initials “INOX”. Good for sea spray areas.
Stainless Steel AISI 316L Bolt Hanger – “ALIEN” Ø10
- 316SS double hole hanger
- Radial R the lower hole = 27 kN
- Estraction R in the upper hole = 16 kN
- Weight = 57 gr
More Details
Rig from one hole and clip the other. Added possibility’s for use. High quality 316 Stainless Steel.
Bolts Stainless Steel (Certified) 120mm
- 10mm x 120mm
- Stainless Steel expansion bolt
- Just add a 10mm hanger
- Certified CE 0679
- New Zealand Speleology Society – Members subsidy contact pete@accessgear.net with your NZSS Number
- Bulk buyers pete@accessgear.net
- Other bolts available just ask.
Maillon Rapid Delta 7mm Stainless Steel (PPE)
- Stainless Steel
- 7mm Delta
- 59 grams
- Breaking Load 31kN
- Certified PPE – Individual number!
- The only Delta with a EN cert!
More Details
Delta shape: developed after the ever-increasing development of webbing-fitted systems; perfect for webbing uphold onto its lower flat part.
Raumer hammer hex convertion
- Converts 13mm (8mm bolt) to 17mm (10mm bolt) hex
- Fits on the Raumer hammer
- Alan key fitting 2 mm hexagonal key with chrome vanadium
- The adaptor is extremely easy to install, using all the tools provided in the kit:
Bolting hammer (Raumer)
- Bolting hammer (Raumer)
- Used for bolting of Climbs Caves or canyons
- Pitch rigging
- Beautifully crafted nicely balanced solid hammer
- Rubber handle
- Stainless steel shaft with 3mm cord 1.5 m long as leash
- Weight: 600 grams
- Length: 26 cm
- Well balanced
- https://www.youtube.com/watch?v=vScT05QfSUY
- 2 x Hex head fittings 13mm plus with the possibility of an 17mm adaptor for bottom hex (extra $22) see above https://accessgear.net/products-page/extras/raumer-hammer-hex-convertion/
Raumer Stainless Steel RING Ø10mm
- Raumer Stainless Steel RING Ø10mm
- Abseil ring Stainless steel AISI 316L ring
- Welded with TIG (Tungsten Inert Gas)
- Inner diameter = 32 mm.
- Cost effective option other than a Stainless Steel maillon.
- Tie on rope or webbing for descending.
- Weight = 82 gr
- R = 40 KN
- 10mm for frequently visited canyons/caves because its super hard wearing.
- Overseas orders contact pete@accessgear.net
Raumer Stainless Steel RING Ø8mm
- Raumer Stainless Steel RING Ø8mm
- Stainless steel Ø8 mm AISI 316L ring
- Welded using TIG (Tungsten Inert Gas)
- Internal diameter of 23mm.
- Smooth and polished
- Weight: 40 gr
- R= 30 kN
- Makes for an easy clean rope pull down!
- 8mm for infrequently visited canyons/caves
More Details
Useful for decsending canyons and caves if threaded onto rope or rated webbing. Makes for an easy clean rope pull down Cheaper option than stainless steel maillons! 316L SS
13mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 13mm spanner
- Fits 8mm bolts
- Weight: 60 gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down.
More Details
A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
Bolting bag/Surveying bag
- Bolting bag/Surveying bag
- Velcro and buckle closure (no loss of equipment)
- Loops inside for bolts
- Internal elastic loop for hammer
- Hammer kept inside of bag (Hammer not included)
- Drill bit compartment – takes 200mm+ long drill bits!
- Adjustable shoulder strap with stainless steel buckle
- Belt loop to clip on harness
- 25cm x 25cm x 7cm approximately. (not too big, not too small)
- Other specific options (just ask)
- Makes a perfect surveying bag or bolting bag
- Mesh option for canyon bolting!! (Another first from Access Gear we believe)
- Colour options on request.
- Contact pete@accessgear.net
More Details
After using various methods/bags/pockets etc for bolting in caves and canyons, we have put all these ideas together to make a specific bag that really is designed for purpose. Not too big, not too small, with velcro and buckle closure, it holds your gear where you need it, inside the bag! This bag doubles as a perfect surveying bag – material options available to suit your needs. We generally use heavy duty materials due to its contents for bolting, but surveyors will be happy with a lighter weight version. Let us know what you want, we will make a bag to suit your job!
17mm Ring Spanner with cord attached
- 17mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 17mm spanner
- Fits 10mm bolts
- Weight: 120gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down.
More Details
A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
19mm Ring Spanner with cord attached
- Chrome-Molybdenum hex 19mm spanner
- Fits 12mm bolts
- Weight: 115 gr
- The 1.5m cord prevents loss.
- Beats an adjustable hands down
More Details
A great quality ring spanner with bent end to save your knuckles from grinding on the rock!
