•  Titanium crow bar
•  This is an individually made bespoke Titanium hand tool – Made in New Zealand!
•  Fossicking – for gold, moving rocks or digging in remote locations.   
•  Diving – fresh water or salt water.  
•  Work – remote difficult locations.    
• Caving – Leverage where you need it in tight places. 
• Climbing – Move dangerous loose boulders and rocks whilst cleaning new routes.
• Thickness 20mm, Length, 630m, Full length of bar – 720mm
• Weight comparison Titanium 976 Grams  Steel. 1679 Grams 42% lighter than Steel.

 Titanium crow bar – This wonderful material is individually crafted into a quality tool. First forged locally, with the ends bent at 90 degrees and 15 degrees respectively, then ground, and finally polished by hand. All here in New Zealand.

No rust or corrosion, even in sea water. Made from solid Titanium,  stronger than steel. (highest strength to weight ratio of any metal)

This Titanium crow bar is –

Hypoallergenic 🙂

Non magnetic!

Highly resistant to acids

Flyer here Titanium Crow Bar Add – updated 29_3_23  In Stock now. Contact pete@accessgear.net or call +6421 1674675

• Bear Claw lanyard – very strong
• 40+kgs B/L
• Yellow, Green, or Orange
• Use it on the Axe aventures knife https://accessgear.net/products-page/all-products/bear-claw-alternative-axe-aventures-knife/

• Bear Claw (alternative) Axe Aventures knife
• Stainless Steel SS 420
• A solid emergency knife option for canyoning
• Similar to the CRKT Bear Claw. Made by French company Axe Aventures
• Almost identical in size. 
• Comes in its own box including 2 x zip ties and silicon grease.
• Buy a strong lanyard here – 40kgs breaking is a lot! https://accessgear.net/products-page/all-products/bear-claw-lanyard/
• Or make your own lanyard…..

• Camp 8.5 MM EXPRESS DYNEEMA RUNNER 60 CM
• Camp Brand
• Sewn rings of 8.5 mm Dyneema® webbing available in 2 lengths 60, 120
• Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
• Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm
• The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.

• Camp 8.5 MM EXPRESS DYNEEMA RUNNER 120 CM
• Camp Brand
• Batch numbered
• Serial numbered
• Sewn rings of 8.5 mm Dyneema® webbing available in 2 lengths 60, 120
• Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
• Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm has many uses. Temporary lanyard, Anchor,Extended Draw, Footloop in ascending etc……
• The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.
•  Certified EN566:2017  ( Be aware some state ‘complies with the certification’ but actually is not certified)

• CRKT Bear Claw™
• Orange colour for visibility
• Ultimate Durability:  AUS 8 is corrosion resistant
• Extremely Sharp:  Veff Serrations™ provide superior cutting power of rope and straps
• Strong and Lightweight:  Glass-reinforced nylon handle is durable and lightweight
• Exceptional Grip:  Textured handle provides grip in wet conditions
• Gear Compatible:  Durable glass-reinforced nylon sheath with mounting options
• https://www.youtube.com/watch?v=-jnZUTVflp8

• MEASUREMENTS

Blade Length 2.39″ (60.58 mm)

Blade Thickness 0.13″ (3.40 mm)

Overall Length 5.69″ (144.48 mm)

Weight 3.20 oz. (90.72 g)

MTDE Speleo Poncho

This MTDE Speleo Poncho is Very Lightweight, and compact, reusable survival garment, whose key advantage over the survival bag or group shelter is that multiples can be combined to make larger single shelters.

This is achieved by intelligent design and placement of Velcro patches. it works as a poncho, as a cape, or as a ‘want to get away from it all’ shelter, as shown!

The advantage of a team using these items is that an individual stranded has enough space for themselves, without carrying extra bulk or having a shelter too big for one person to warm effectively. However, if a team is immobilised then a big-enough single shelter can also be created. The fact that different numbers of these ponchos can be combined to create a different size of shelter also increases the systems flexibility, helpful in coping with limited or oddly-shaped bivouac space.

For this reason they are also a useful component in emergency grab-bags, although their greatest benefit arises if they are carried as standard by individual.

• A high quality 27kN CE and UIAA sling
• Bluewater dyneema sling
• Comes with 2 x rubber keepers to keep the carabiners in place. (Like the green one on the right)
• Green, Red, Purple if available
• 15cm long

Any questions – Contact pete@accessgear.net 

• Quick Draw sling
• Kordas brand – 15cm long
• Very strong webbing 15mm wide
• Make a canyon quickdraw. Add some HMS carabiners https://accessgear.net/products-page/carabiners-and-maillon-rapides/core-lock/
• This webbing is suitable for extending your abseiling device
• Certified EN566:2017
• Minimum resistance guaranteed 2500 daN.
• Rated 25kN
• https://www.sacidkordas.com/en/express/
• Contact pete@accessgear.net

Nano Traxion the smaller version of the Micro Traxion

• Weight: 53 g
• Certification(s): CE EN 567, UIAA
• Min. rope diameter: 7 mm
• Max. rope diameter: 11 mm
• Sheave type: sealed ball bearings
• Sheave diameter: 18 mm
• Breaking strength: 2 x 7,5 = 15 kN
• Breaking strength as progress capture pulley: 4 kN
• Efficiency: 91 %
• Review here https://www.youtube.com/watch?v=-uNrvrC-_k4&t=910s

• Canyoning Jacket
• Waterproof jacket in high resistant polyurethane coated polyamide
•  Blue colour.
• Extra warmth and wind protection
• Fits over wetsuit for canyoning.
• Large armhole with raglan sleeve for a easy movement
• Fleece lined collar. Self grip fastening.
• Shoulder reinforcement
• A double breast pocket closed by Self velcro fastener.
• Velcro  adjustment for the cuffs.
• Extra warmth and protection over wetsuit for canyoning.
• Hood inside collar.
• S ,M, L or XL depending on availability.

• CurTec 6 ltr drum
• After testing my own waterproof drums for over 20 years, I can see the value of having a simple, solid dry storage whist getting into your favourite places. This is it!
• Very good value for money, over time these out last dry bags x 10!
• 100% Waterproof – make sure the lid is tightened prior to getting wet.
• 6 liter
• 3.4ltr https://accessgear.net/products-page/extras/curtec-drum/
• Fits in every Access Gear canyoning and cave pack.
• Perfect for keeping gear dry
• Emergency and medical  supplies
• Food or cameras etc
• O’ring seal
• Made of polyethylene
• External dimensions: 195mm diametre, 265mm tall
• Opening: 132mm
• Internal depth: 240mm
• Weight: 425g
• Dry bags tend to leak because they are not waterproof, your gear will be wet and your sandwiches soggy, yuk!
• So much quicker to access your equipment than a dry bag.
• Contact pete@accessgear.net

• Curtec drum 3.6ltr
• After testing my own waterproof drums for over 20 years, the value of having a simple solid dry storage place makes sense. This is it!
• Very good value for money, over time these out last dry bags x 10!
• 100% Waterproof – make sure the lid is tightened prior to getting wet.
• Curtec Drum 3.6 ltr
• 6 Ltr –  https://accessgear.net/products-page/all-products/6ltr-curtec-drum/
• Fits in every Access Gear canyoning and cave pack.
• Perfect for keeping gear dry
• Emergency and medical  supplies
• Food or cameras etc
• O’ring seal
• Made of polyethylene
• External dimensions: 195mm diametre, 170mm tall
• Opening: 132mm
• Internal depth: 150mm
• Weight: 350g
• Dry bags tend to leak because they are not waterproof your gear will be wet and your sandwiches soggy, yuk!
• So much quicker to access your equipment than a dry bag.
• Contact pete@accessgear.net

• Raumer 6mm triple chain links for permanent anchor stations and joining hangers together
• 37cm long
• Connect this chain using 2 x stainless steel maillon’s
• Great for connecting anchors or replacing rope/webbing anchors with these permanent anchors
• Durable and suitable for all environments. Like all Raumer anchors, since 2013 made exclusively in AISI 316L Stainless Steel.
• Finished in a pale grey to lessen the visual impact.
• This chain can be clipped by 2 persons simultaneously
• Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
• Weight = 186 gr
  
• Contact pete@accessgear.net

• Raumer 6mm double chain links
• 25cm long
• Connect this chain using 2 x stainless steel maillon’s
• Great for connecting anchors or fixing rope/webbing anchors that need replacing with permanent anchors
• Durable and suitable for all environments. Like all our anchors, since 2013 made exclusively in AISI 316L.
• Finished in a pale grey to lessen the visual impact.
• Chain can be clipped by 2 persons simultaneously
• Weight = 125 gr
• Strength – In tension 30kN https://www.youtube.com/watch?v=pegXKWtRutY
• Contact pete@accessgear.net
  

• VT Prusik 7mm
• The VT is a versatile open-end prusik that can be used to tie:
• Symmetric Prusik
• Asymmetric Prusik (Schwabisch/Distal)
• Valdotain Tresse
• French Prusik
• Overall Length: 32″ (81cm)
• MBS End to End: 11.3 kN (2,500 lbf)
• MBS Basket: 22.6 kN (5,000 lbf)
• For personal use on ropes 8 mm to 9.5 mm

• Bluewater VT Prusik 8mm
• Made by BlueWater this VT Prusik is the real deal.
• Made from Technora material
• Rated 20kN across from eye to eye
• Rated 29kN Basket
• Two sewn eyes
• 31 inches – 79 cm
• Technora Sheath – This is heat resistant way above other materials.
• Bar tacked using Technora thread
• Manufacturing date and ID number
• Made in the USA
• How to tie a VT here – http://www.netknots.com/rope_knots/valdotain-tresse
• Watch this video  https://www.youtube.com/watch?v=Z-xjqI1WOY8
• Testing here https://www.youtube.com/watch?v=szd5upswbVQ
• This specialty design features a tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from flattening and binding up. A computerized large gauge sewing machine is used to bar tack a devilishly strong stitch with our custom Technora thread. This thread / stitch combination yields superior strength and overall durability. Manufactured in the U.S.A.The VT Prusik is a versatile open-end Prusik. Use to tie:
  Symmetric Prusik, Asymmetric Prusik (Schwabisch/Distal), Valdotain Tresse, French PrusikThe VT Prusik 8mm performs well when used for ascending, self-belay while rappelling, as a traveling rope grab, or in conjunction with a Prusik minding pulley in haul systems.Overall length: 33″
  For use on ropes 8mm – 13mm in diameterTensile Strengths:
  End to End: 4,400 lbf
  Basket: 6,500 lbf

• Eazi-fit Knee Protectors
• Make caving, gardening and kneeling great again, use Knee Protectors
• Often worn under overalls
• A must for lava caves
• Save your knees
• Simple velcro fit, fits anyone.
• These last for a long time.
• Overseas buyers contact pete@accessgear.net

Eazi-fit Knee Protectors

• Rescue knife for cutting rope and webbing when canyoning/caving or working.
• ergonomically shaped handle with finger hole for a secure grip when swimming
• high quality stainless steel
• rounded point for additional safety
• robust plastic holder for attachment to a canyoning harness
• Comes with lanyard attached
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Kong Slyde
• Aluminium Alloy
• 44 grms
• Make a adjustable lanyard
• Shock absorbing

• Petzl Spatha
• Smooth/serrated combo blade easily cuts ropes and cordage
• Hole for attaching the knife to the harness a carabiner
• Notch in the blade for opening the knife with bare hands
• Textured wheel for opening the blade when wearing gloves
• Mechanism for locking the blade in the open position
• Stainless steel blade for improved durability
• 43g
• in Yellow or Blue where available!
• 

• Scurion Battery (4 Cell) 7Ah
• 7 Ah  batteries
• 50Wh
• 190g

See the runtime chart here – https://www.scurion.ch/jm19/en/lamps-en-eg/model-overview/scurion-1500-en-gb/37-infos/52-maximum-run-time.html

OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Caving rack bars
• Harder wearing replacement cave rack bars
• Twice the use of traditional caving rack bars
• 316 Stainless Steel
• These will fit your standard rack https://accessgear.net/products-page/ascenders-and-decenders/access-gear-caving-rack-2/
• 2.35 mm thick bars or the very thick 3.3mm means a lot more time on rope before moving them around.
• All bars are interchangeable – so longer life still.
• Perfect for expedition caving
• A full 5 x bars per set.
• Contact pete@accessgear.net

• Dyneema Foot loop
• Using Genuine Dyneema cord
• Strong stitched webbing and cord
• Adjustable with hardened aluminium slider
• Double thick Nylon webbing for feet (webbing stays open when needed)
• D ring for tidy hanging on harness
• Very thick clear glue heat shrink over top of bartack stitch
• We broke a footloop to test its strength!! Breaking at the adjustment buckle – 6.2kN seems very reasonable for a non PPE  footloop to us.
• 

• CLICK HERE

NO LONGER SOLD as it is potentially unsafe – we have better options available, please ask.

• Bag colours available – Pistahio .
• For canyoners
• Vivid Yellow cord
• Light weight at 250 gms
• Very well made
• 6 mm cord
• 15m long
• Bag may vary – please ask
• PLEASE ENQUIRE – CLICK HERE

• Camp Safety Tooler (made in France)
• Tool-holding lanyard consisting of elastic strap (length: 85-120cm)
• The ideal solution to hold any tool safely (maximum weight 10kg) while working at height
• Tooler must never be used as a safety lanyard
• Weight – 40g

Perfect storage for wet items, due to the fact it allows them to dry.

• Sturdy mesh
• Hanging loop on side
• 300 mm zip along top
• 300 mm x 300 mm
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Petzl St’Anneau
• Useful 120cm length
• Made in France
• Red/white
• 22kN rated CE UIAA EN566
• Dynema 40g
• Nice and light weight!

• D shape
• screw lock
• suitable for holding some device on your harness etc.
• Colour: black + gold/silver
• Weight: 28 g • 1 oz
• Material: aluminium alloy (anodized)
• Strength major axis: 3 kN
• Gate opening (d): 12 mm
• This carabiner is not intended for climbing or belaying!

• Petzl Torse
• Simple construction
• Rapid buckle facilitates placement and removal of the strap on the harness
• DoubleBack buckle for quick, precise adjustment
• Superior quality webbing for excellent durability

Great for protectiong your ropes from sharp edges. Handrails, gutters, rocks etc

• Double Canvas or PVC ripstop
• Very hardwearing
• Velcro fastening
• 750mm long
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Rope-protector small
• Ideal where weight is an issue – eg. caving/canyoning/climbing
• Single layer PVC ripstop
• Webbing underneath for extra wear resistance
• Velcro fastening
• 500 mm long
• Webbing loop for holding in place
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Petzl Foot Tape
• Attaches to the ASCENSION ascender for rope ascents
• Underfoot strap is abrasion-resistant and is slightly rigid to make it easier to step into
• Adjustable elastic keeps feet in the loop with any type of shoe
• DoubleBack buckle easily and quickly adjusts length of foot loop
• Material(s): nylon, steel
• Weight: 65 g

• For marking your ropes
• From Kordas
• Will not damage your rope
• Red or black
• Mark the middle and the ends for clarification
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE CLICK HERE

• Petzl Footcord
• Attaches to Ascenders for rope ascents
• 100 % Dyneema for increased durability
• Elastic keeps foot in loop. It is adjustable in length, so it works with any type of shoe and stores easily when not in use
• Plate for adjusting foot loop length
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Large cord lock for your all bags
• Will fit 5 – 7mm cord
• Strongly sprung and easy to use
• Upgrade your bag with this.

• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE –CLICK HERE

• Beal Dyneema cord 5mm
• Beal brand – Not to be confused with inferior products – this is 100% Dyneema
• Very high abrasion resistance
• Incredibly strong and lightweight
• 1200 daN (kgs) Breaking strength in a single strand
• 1500 daN (kgs) Breaking strength in a loop (with triple fishermans)
• 15g p/m
• Certified consistancy  – CE UIAA
• Sold by the meter or contact for spool price
• pete@accessgear.net

• Converts 13mm (8mm bolt) to 17mm (10mm bolt) hex
• Fits on the Raumer hammer
• Alan key fitting 2 mm hexagonal key with chrome vanadium
• The adaptor is extremely easy to install, using all the tools provided in the kit:

• Bolting hammer (Raumer)
• Used for bolting of Climbs Caves or canyons
• Pitch rigging
• Beautifully crafted nicely balanced solid hammer
• Rubber handle
• Stainless steel shaft with 3mm cord 1.5 m long as leash
• Weight: 600 grams
• Length: 26 cm
• Well balanced
• https://www.youtube.com/watch?v=vScT05QfSUY
• 2 x Hex head fittings 13mm plus with the possibility of an 17mm adaptor for bottom hex (extra $22)  see above https://accessgear.net/products-page/extras/raumer-hammer-hex-convertion/
• 

• Raumer  Stainless Steel RING Ø10mm
• Abseil ring Stainless steel AISI 316L ring
• Welded with TIG (Tungsten Inert Gas)
• Inner diameter = 32 mm.
• Cost effective option other than a Stainless Steel maillon.
• Tie on rope or webbing for descending.
• Weight = 82 gr
• R = 40 KN
• 10mm for frequently visited canyons/caves because its super hard wearing.
• Overseas orders contact pete@accessgear.net

• Raumer Stainless Steel RING Ø8mm
• Stainless steel Ø8 mm AISI 316L ring
• Welded using TIG (Tungsten Inert Gas)
• Internal diameter of 23mm.
• Smooth and polished
• Weight: 40 gr
• R= 30 kN
• Makes for an easy clean rope pull down!
• 8mm for infrequently visited canyons/caves

• Chrome-Molybdenum hex 13mm spanner
• Fits 8mm bolts
• Weight: 60 gr
• The 1.5m cord prevents loss.
• Beats an adjustable hands down.

• 17mm Ring Spanner with cord attached
• Chrome-Molybdenum hex 17mm spanner
• Fits 10mm bolts
• Weight: 120gr
• The 1.5m cord prevents loss.
• Beats an adjustable hands down.

• Super strong shopping bag/beach bag
• Made to last and last (We have our original- 9 years and it is in perfect nick!)
• Another Access Gear original
• Handles a day at the beach or market, beer or potatoes etc…..
• Washable
• 350mm x 320mmx 210mmWe have our original from 8 years and it is still in perfect nick!
• Colours possible Red, Yellow, Blue Orange etc,
• White mesh or Black mesh possible please ask.
• As an option I have been ask to add flotation – Must be a wet day!! 🙂

• Chrome-Molybdenum hex 19mm spanner
• Fits 12mm bolts
• Weight: 115 gr
• The 1.5m cord prevents loss.
• Beats an adjustable hands down

• Made by us in NZ
• Protection when sliding whilst canyoning
• Saves wetsuit damage
• 25mm join for longer lasting
• Heavy duty fabric
• Will fit harnesses up to 60mm webbing.
• Welded  for strength!
• A must for every canyoner
• Updated now 15/10/19
• This fits very well – no flappy bits!
• 2 sizes available s/m or m/l

Contact pete@accessgear.net with any questions

• Petzl Connect Adjust
• Length: 15 – 95 cm
• Weight: 125 g
• Certification(s): CE, UIAA 109
• Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
• Single positioning lanyard with adjustable arm
• The ADJUST rope adjuster’s ergonomic shape offers quick, precise adjustment
• Lanyard adjusts from 15 to 95 cm
• The connector is held in position by a rubber ring, to facilitate clipping
• Dynamic rope lanyard
• More info – https://www.petzl.com/INT/en/Sport/Lanyards/CONNECT-ADJUST

• Access Gear – Load release system
• Release a test load smoothly, and simply.
• No cutting!
• Release with a pull cord at a safe distance
• Can be used as a swing release (needs understanding)
• Re use time and time again
• Not PPE
• Handles a couple of kN with ease
• Made by Access Gear in New Zealand
• Carabiners not included
• Colours vary.
• Contact pete@accessgear.net

• Adjustable positioning lanyard for attaching to anchors
• Ergonomic adjuster for quick and easy adjustment
• Unique design allows adjustment even under load
• 9.7 mm dynamic rope lanyard
• Adjustable from 20-100 cm
• Large connection hole accommodates all sizes of locking carabiners
• Attaches to the tie-in point of the harness with a girth hitch
• Weight: 145g
• CE 0123 UIAA
• Rope diameter: 9.7mm
•  Use any carabiner you like!
• https://www.youtube.com/watch?v=PAf3VTHY0hs
• SOLD OUT!

• Wetsuit seam sealer and coating for wear resistance
• Use on Neoprene or Nylon
• Seam seal caving overalls
• For knee protection, build up three layers for robust protection
• Designed to reinforce and protect knees, elbows and sewing lines
• 100ml

• MULTIANCHOR Rigging plate (Camp)
• Strong aluminum alloy plate with 5  holes.
• Orange
• Dimensions: 93 x 72 x 8mm
• Holes: 5 x 19mm
• Strength: 30kN
• Weight: 70g

• Fenix HM65R
• Amazing value for powerful headlamp or back up caving lamp
• Independant Spot and floodlight by way of two easy to operate buttons
• Cree XM-L2 U2 white, XP-G2 R5 neutral white LED, with a lifespan of 50,000 hours.
• Powered by one 18650 (Supplied) rechargeable Li-ion battery or two 3V/CR123A batteries
• Constant current circuit guarantees longer runtime
• Dual top switches for easy and fast operation
• USB Type-C charging, 1.5A large current
• Quality aluminum, magnesium and PC material, lightweight and durable
• Waterproof IP68
• Toughened ultra-clear glass lens with an anti-reflective coating
• 3.17″ Length x 2.17″ Width x 1.57″ Height (80.5 x 55x 40 mm)
• 3.42 oz / 97 grams (excluding battery)
•  Runtimes here  – hm65r-spec-chart
• For runners look at the – https://accessgear.net/products-page/lamps-and-spares/fenix-headlamp-hm65r-t/
• 

• Petzl Dual Connect Adjust
• An Adjustable double lanyard!
• Fixed arm length: 45 cm
• Adjustable arm length: 15 to 95 cm
• Weight: 160 g
• Certification(s): CE, UIAA 109
• Material(s): nylon, aluminum, thermoplastic elastomer (TPE)
• Contact pete@accessgear.net 
• 

• Stainless Steel
• Great for small projects
• Small hole for cord etc.
• Make your own adjustable 25mm webbing straps.
• Webbing also available on request just ask
• A quality product

• AV Fornocal trousers
• Complement to the Taka canyoning jacket
• Use this combination for caving, canyoning.
• Great for prospecting for caves
• Polyamide coated trousers for protection of the neoprene canyoning suit.
• Buttock reinforcement without central stitching, + knee reinforcement.
• Velcro fastening with nylon clip together belt to hold ya pants up!
• Wear resistant material (used for caving suits)
• Sizing available S/M/L
• Weight 600 g
• Blue/Black