•  Titanium crow bar
•  This is an individually made bespoke Titanium hand tool – Made in New Zealand!
•  Fossicking – for gold, moving rocks or digging in remote locations.   
•  Diving – fresh water or salt water.  
•  Work – remote difficult locations.    
• Caving – Leverage where you need it in tight places. 
• Climbing – Move dangerous loose boulders and rocks whilst cleaning new routes.
• Thickness 20mm, Length, 630m, Full length of bar – 720mm
• Weight comparison Titanium 976 Grams  Steel. 1679 Grams 42% lighter than Steel.

 Titanium crow bar – This wonderful material is individually crafted into a quality tool. First forged locally, with the ends bent at 90 degrees and 15 degrees respectively, then ground, and finally polished by hand. All here in New Zealand.

No rust or corrosion, even in sea water. Made from solid Titanium,  stronger than steel. (highest strength to weight ratio of any metal)

This Titanium crow bar is –

Hypoallergenic 🙂

Non magnetic!

Highly resistant to acids

Flyer here Titanium Crow Bar Add – updated 29_3_23  In Stock now. Contact pete@accessgear.net or call +6421 1674675

• Bear Claw lanyard – very strong
• 40+kgs B/L
• Yellow, Green, or Orange
• Use it on the Axe aventures knife https://accessgear.net/products-page/all-products/bear-claw-alternative-axe-aventures-knife/

• Bear Claw (alternative) Axe Aventures knife
• Stainless Steel SS 420
• A solid emergency knife option for canyoning
• Similar to the CRKT Bear Claw. Made by French company Axe Aventures
• Almost identical in size. 
• Comes in its own box including 2 x zip ties and silicon grease.
• Buy a strong lanyard here – 40kgs breaking is a lot! https://accessgear.net/products-page/all-products/bear-claw-lanyard/
• Or make your own lanyard…..

• Camp 8.5 MM EXPRESS DYNEEMA RUNNER 60 CM
• Camp Brand
• Sewn rings of 8.5 mm Dyneema® webbing available in 2 lengths 60, 120
• Extremely thin and super lightweight, they are ideal for making low-profile extendable alpine draws, building alpine anchors and for use in ice anchors like V-Threads or A-Threads where the narrow profile can fit through ice screw holes with ease.
• Use the 60 cm length for extendable alpine draws combined with lightweight carabiners. The 120 cm
• The thin profile makes them extremely compact for carrying and the hydrophobic properties of Dyneema® means they will not absorb moisture or become weaker when wet.

• CRKT Bear Claw™
• Orange colour for visibility
• Ultimate Durability:  AUS 8 is corrosion resistant
• Extremely Sharp:  Veff Serrations™ provide superior cutting power of rope and straps
• Strong and Lightweight:  Glass-reinforced nylon handle is durable and lightweight
• Exceptional Grip:  Textured handle provides grip in wet conditions
• Gear Compatible:  Durable glass-reinforced nylon sheath with mounting options
• https://www.youtube.com/watch?v=-jnZUTVflp8

• MEASUREMENTS

Blade Length 2.39″ (60.58 mm)

Blade Thickness 0.13″ (3.40 mm)

Overall Length 5.69″ (144.48 mm)

Weight 3.20 oz. (90.72 g)

MTDE Speleo Poncho

This MTDE Speleo Poncho is Very Lightweight, and compact, reusable survival garment, whose key advantage over the survival bag or group shelter is that multiples can be combined to make larger single shelters.

This is achieved by intelligent design and placement of Velcro patches. it works as a poncho, as a cape, or as a ‘want to get away from it all’ shelter, as shown!

The advantage of a team using these items is that an individual stranded has enough space for themselves, without carrying extra bulk or having a shelter too big for one person to warm effectively. However, if a team is immobilised then a big-enough single shelter can also be created. The fact that different numbers of these ponchos can be combined to create a different size of shelter also increases the systems flexibility, helpful in coping with limited or oddly-shaped bivouac space.

For this reason they are also a useful component in emergency grab-bags, although their greatest benefit arises if they are carried as standard by individual.

• Nylon Sleeve
• Aluminium axle
• Blue/Silver
• Prusik minding
• < 13mm rope
• A simple economic Pulley.
• 59g
• 72 x 44 mm
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

Nano Traxion the smaller version of the Micro Traxion

• Weight: 53 g
• Certification(s): CE EN 567, UIAA
• Min. rope diameter: 7 mm
• Max. rope diameter: 11 mm
• Sheave type: sealed ball bearings
• Sheave diameter: 18 mm
• Breaking strength: 2 x 7,5 = 15 kN
• Breaking strength as progress capture pulley: 4 kN
• Efficiency: 91 %
• Review here https://www.youtube.com/watch?v=-uNrvrC-_k4&t=910s

• Canyoning Jacket
• Waterproof jacket in high resistant polyurethane coated polyamide
•  Blue colour.
• Extra warmth and wind protection
• Fits over wetsuit for canyoning.
• Large armhole with raglan sleeve for a easy movement
• Fleece lined collar. Self grip fastening.
• Shoulder reinforcement
• A double breast pocket closed by Self velcro fastener.
• Velcro  adjustment for the cuffs.
• Extra warmth and protection over wetsuit for canyoning.
• Hood inside collar.
• S ,M, L or XL depending on availability.

• Axle: Ball Bearing
• Material: High Quality Aluminum
• Dimensions: 3.97” x 2.9” x 1.37”
• Weight: 6.3 oz (179g)
• Max. Rope: 1/2” (13mm)
• Sheave: 2” aluminum
• 3 Sigma MBS: 36kN (8,093 lbf)
• NFPA1983 Certified
• Made In USA

• SMC small pulley
• Nylon Sleeve
• Aluminium axle
• Orange/Silver
• Prusik minding
• < 13mm rope
• A simple economic Pulley.
• 59g
• 72 x 44 mm
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Curtec drum 3.6ltr
• After testing my own waterproof drums for over 20 years, the value of having a simple solid dry storage place makes sense. This is it!
• Very good value for money, over time these out last dry bags x 10!
• 100% Waterproof – make sure the lid is tightened prior to getting wet.
• Curtec Drum 3.6 ltr
• 6 Ltr –  https://accessgear.net/products-page/all-products/6ltr-curtec-drum/
• Fits in every Access Gear canyoning and cave pack.
• Perfect for keeping gear dry
• Emergency and medical  supplies
• Food or cameras etc
• O’ring seal
• Made of polyethylene
• External dimensions: 195mm diametre, 170mm tall
• Opening: 132mm
• Internal depth: 150mm
• Weight: 350g
• Dry bags tend to leak because they are not waterproof your gear will be wet and your sandwiches soggy, yuk!
• So much quicker to access your equipment than a dry bag.
• Contact pete@accessgear.net

• Material(s): aluminum side plates, nylon sheave
• Certification(s): CE EN 12278, UIAA
• Weight 42 g
• 7mm-11mm
• 71% Efficiency
• Working load 4kN 2 strands 2 kN one Strand
• Breaking Load 15kN
• Aditional info and overseas orders pete@accessgear.net

• VT Prusik 7mm
• The VT is a versatile open-end prusik that can be used to tie:
• Symmetric Prusik
• Asymmetric Prusik (Schwabisch/Distal)
• Valdotain Tresse
• French Prusik
• Overall Length: 32″ (81cm)
• MBS End to End: 11.3 kN (2,500 lbf)
• MBS Basket: 22.6 kN (5,000 lbf)
• For personal use on ropes 8 mm to 9.5 mm

• Petzl Mini prusik-minding pulley.
• 25mm aluminium sheave, sealed ball bearings:
• Efficiency 91%.
• Ropes 7-11mm dia.
• WLL 5kN UIAA
• Breaking load 23kN
• 80g
• 7 < 11mm rope.

• Bluewater VT Prusik 8mm
• Made by BlueWater this VT Prusik is the real deal.
• Made from Technora material
• Rated 20kN across from eye to eye
• Rated 29kN Basket
• Two sewn eyes
• 31 inches – 79 cm
• Technora Sheath – This is heat resistant way above other materials.
• Bar tacked using Technora thread
• Manufacturing date and ID number
• Made in the USA
• How to tie a VT here – http://www.netknots.com/rope_knots/valdotain-tresse
• Watch this video  https://www.youtube.com/watch?v=Z-xjqI1WOY8
• Testing here https://www.youtube.com/watch?v=szd5upswbVQ
• This specialty design features a tough, heat resistant Technora aramid sheath over durable nylon core strands. The core in this kernmantle design keeps the VT from flattening and binding up. A computerized large gauge sewing machine is used to bar tack a devilishly strong stitch with our custom Technora thread. This thread / stitch combination yields superior strength and overall durability. Manufactured in the U.S.A.The VT Prusik is a versatile open-end Prusik. Use to tie:
  Symmetric Prusik, Asymmetric Prusik (Schwabisch/Distal), Valdotain Tresse, French PrusikThe VT Prusik 8mm performs well when used for ascending, self-belay while rappelling, as a traveling rope grab, or in conjunction with a Prusik minding pulley in haul systems.Overall length: 33″
  For use on ropes 8mm – 13mm in diameterTensile Strengths:
  End to End: 4,400 lbf
  Basket: 6,500 lbf

• Raumer Braking Carabiner
• AISI 304 stainless steel
• To be used with speleo-type bobbin descenders, etc on a single rope.
• This brake carabiner becomes an almost indispensable accessory for people of large build.
• Perfect for carrying very heavy packs or perhaps on new, dry or thin ropes.
• 135g
• 12Kn resistance
• learn to use it correctly for added control on rope!

• Rescue knife for cutting rope and webbing when canyoning/caving or working.
• ergonomically shaped handle with finger hole for a secure grip when swimming
• high quality stainless steel
• rounded point for additional safety
• robust plastic holder for attachment to a canyoning harness
• Comes with lanyard attached
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Petzl Spatha
• Smooth/serrated combo blade easily cuts ropes and cordage
• Hole for attaching the knife to the harness a carabiner
• Notch in the blade for opening the knife with bare hands
• Textured wheel for opening the blade when wearing gloves
• Mechanism for locking the blade in the open position
• Stainless steel blade for improved durability
• 43g
• in Yellow or Blue where available!
• 

• 6 mm Kordas accessory cord.
• Strength 8.5 kN
• Tie your own prusiks
• Yellow, Red or Green when available
• CE 0120
• Price per metre or contact for whole spool.
• OVERSEAS ORDERS OR BANK DEPOSITS- PLEASE ENQUIRE – CLICK HERE

• Bag colours available – Pistahio .
• For canyoners
• Vivid Yellow cord
• Light weight at 250 gms
• Very well made
• 6 mm cord
• 15m long
• Bag may vary – please ask
• PLEASE ENQUIRE – CLICK HERE

• Petzl Tibloc
• Extremely compact and lightweight:
• An efficient piece of basic equipment
• Can be used as a progress capture device in a hauling system or for ascending ropes
• Material(s): stainless steel
• Weight: 35 g
• Rope compatibility: 8 to 11 mm
• Certification(s): CE EN 567, EAC

PETZL MICRO TRAXION

Specifications